Abstract:This study examines effects of mixing municipal solid waste incineration bottom ash (MSWI-BA) with reddish laterite clay (RLC), evaluating factors such as vertical stress, mixing ratio, curing period, and the addition of lime. A total of 153 direct shear tests were conducted to thoroughly assess the mixture's strength characteristics. Vertical stress levels of 85.5 kPa, 172.4 kPa, and 259.3 kPa were used to simulate varying stress conditions, while mixing ratios of 40 %, 80 %, 100 %, and 120 % were applied to explore potential applications of recycled MSWI-BA with clayey soils. A fast-curing approach was employed, with curing periods of 24, 48, and 72 h, to investigate the time-dependent strength development under controlled conditions. A three-way ANOVA analysis confirmed that mixing ratio, curing period, and vertical stress significantly impacted both peak and residual shear strength. The 100 % MSWI-BA mixture, with or without 1 % lime, exhibited optimal performance, providing the pronounced shear strengths and dilative behavior. The study found that MSWI-BA significantly improved shear strength ratios compared to the RLC, with improvement ratios ranging from 1.439 to 2.460 across stress levels. Additionally, upper and lower bound equations for peak and residual strength ratios were developed, providing predictive tools for mixture design. Cohesion values in the range of 8.3-128.9 kPa and friction angles from 40.6° to 44.1° were achieved, surpassing or matching those reported in similar research. The study employed Bolton's (1986) dilatancy model, finding α values between 0.61 and 0.71, comparable to those in studies of granular materials. These results highlight the effectiveness of adding MSWI-BA and lime in enhancing reddish laterite soil stabilization through both chemical and mechanical means, making it a sustainable and cost-effective approach for civil engineering projects by improving material strength, reusing local soils, recycling waste, and reducing carbon footprints.

Feasibility of Preparing Self-Compacting Mortar Via Municipal Solid Waste Incineration Bottom Ash: an Experimental Study

Mechanical and Durability Properties of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregate and Fly Ash, Slag and Silica Fume

Utilization of Cow Bone Waste and Calcium Oxide for the Solidification and Stabilization of MSWI Fly Ash: Towards Sustainable Practices

Solidification of dewatered sewage sludge using bottom ash of MSWI as skeleton material

Measurements of geotechnical properties of municipal solid waste incineration fly ash stabilized by chemical reagents

Utilization of Different Grain Size of Municipal Solid Waste Bottom Ash in High-Performance Mortars

Utilization of Mechanochemically Pretreated Municipal Solid Waste Incineration Fly Ash for Supplementary Cementitious Material

The Effect of Milled Municipal Solid Waste Incineration Bottom Ash on Cement Hydration and Mortar Properties

Recycling of Municipal Solid Waste Incineration By-Product for Cement Composites Preparation

Use of Municipal Solid Waste Incineration Fly Ash As a Supplementary Cementitious Material: CO2 Mineralization Coupled with Mechanochemical Pretreatment.

A review on the utilization of municipal solid waste incineration (MSWI) bottom ash as a mineral resource for construction materials

Preparation and Hydration Properties of Sodium Silicate-Activated Municipal Solid Waste Incineration Bottom Ash Composite Ground-Granulated Blast Furnace Slag Cementitious Materials

Manufacture of alkali-activated cementitious materials using municipal solid waste incineration (MSWI) ash: Immobilization of heavy metals in MSWI fly ash by MSWI bottom ash

Study on Relationship between Pore Structure and Mechanical Properties of Concrete Using Municipal Solid Waste Incineration Bottom ash as Fine Aggregate

Physiochemical properties, heavy metal leaching characteristics and reutilization evaluations of solid ashes from municipal solid waste incinerator plants

Research on the Preparation of Dry Mixed Mortar Using Waste Incineration Fly Ash

Utilization of Municipal Solid Waste Incineration Bottom Ash as Fine Aggregate of Cement Mortars

Investigation of Mechanochemically Treated Municipal Solid Waste Incineration Fly Ash as Replacement for Cement

Manufacture of Alkali-Activated and Geopolymer Hybrid Binder (AGHB) by Municipal Waste Incineration Fly Ash Incorporating Aluminosilicate Supplementary Cementitious Materials (ASCM).

The Performance Evaluation of Asphalt Mortar and Asphalt Mixture Containing Municipal Solid Waste Incineration Fly Ash

Evaluating the strength characteristics of mixtures of municipal solid waste incineration bottom ash and reddish laterite clay for sustainable construction