Abstract:In this article, an in-line Mach-Zehnder interferometer (ILMZI)-based temperature sensor of a sandwich-like composite structure was proposed and experimentally demonstrated. Using simple cleaving and splicing operations, ILMZI was formed by compactly sandwiching a section of four-hole microstructure optical fiber (FHMF) of ultrashort length between two segments of multimode fibers and single-mode fibers in turn. Due to the large thermo-optic coefficient difference between the silica and air modes in FHMF, the sensor achieves a comparable sensitivity of 67.29 pm/degrees C over a wide dynamic range of 20.8 degrees C-100.4 degrees C. Because the sensing area length is only a few hundred micrometers, the long-term stability and anti-interference of the sensor are greatly enhanced. In addition, the large airhole design confines the propagation mode in silica medium by total internal reflection, reducing the interaction between the liquid sample and the sensing element, making the sensor inert to the ambient refractive index. The maximum response deviation of the sensor under microvibration disturbances is 3.51 x 10(-4) nm/degrees C, and the maximum cross-sensitivity under strain disturbances is only 0.0018 degrees C/mu epsilon. The proposed sensor is excellent in performance, easy in fabrication, simple in structure, and low in cost, which can be expected to be used in practical temperature sensing applications without any additional packaging.

An Improved Sensitivity Temperature Sensor Based on Tapered Hollow-core Bragg Fiber

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

A High Sensitivity Temperature Sensor Based on Balloon-Shaped Bent SMF Structure with Its Original Polymer Coating

A Reliable Anti-Interference Temperature Sensor Based on a Four-Hole Microstructure Optical Fiber Mach-Zehnder Interferometer.

Sensitivity-Enhanced Fiber Temperature Sensor Based on Vernier Effect and Dual In-Line Mach–Zehnder Interferometers

Optical fiber temperature sensor with Vernier effect formed by Mach–Zehnder interferometer cascaded Sagnac interferometer based on Hollow-core photonic crystal fiber

An Antiinterference Temperature Sensor Based on Mach-Zehnder Interferometer Using Kagome Hollow-Core Photonic Crystal Fiber

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

Temperature and Curvature Microfiber Mach-Zehnder Interferometer Sensor Based on Double Peanut-Shaped Structures and Tapered Coreless Fiber

Temperature sensor with enhanced sensitivity based on silicon Mach-Zehnder interferometer with waveguide group index engineering.

Highly-sensitive temperature sensor based on photopolymerized-waveguide embedded Mach-Zehnder interferometer

A Temperature Sensor Based on Composite Optical Waveguide

Fiber-optic Mach–Zehnder interferometric sensor for high-sensitivity high temperature measurement

A temperature sensor based on multi-beam capture and interference

Improved optical fiber Mach-Zehnder high-sensitivity refractive index sensor

Axial strain and temperature sensor based on tapered biased four-core fiber operating at dispersion turning point

An All Fiber Mach-Zehnder Interferometer Based on Tapering Core-Offset Joint for Strain Sensing

High-sensitivity and Large-Range Fiber Optic Temperature Sensor Based on PDMS-coated Mach-Zehnder Interferometer Combined with FBG.

High-Sensitivity Temperature Fiber Sensor Based on Two Cascaded Balloon-shaped Bent SMFs integrated with a Seven-core fiber

Ultra-high sensitivity temperature sensor based on PDMS-assisted-cascaded Mach–Zehnder Interferometer

Large measurement range and high sensitivity temperature sensor with FBG cascaded Mach-Zehnder interferometer