Abstract:Underwater bionic robotics or vehicles using oscillating flexible structures as power sources are attracting considerable attention. In this study, the hydrodynamic effect and fluid–structure coupled vibration of a flexible caudal fin actuated by macro fiber composites(MFC) are investigated. A fluid–structure coupled dynamic equation of the MFC-actuated caudal fin with a variable cross-section is established, and both the internal moment generated by the MFC and the complex-valued hydrodynamic forces are considered. Distributions and evolutions of the flow velocity and pressure in the vicinity of the oscillating caudal fin with different parameters are visualized through comprehensive parametric CFD simulations. Simulation results show that the presence of the gap introduces significant flow reshaping effects to the flow distribution and hydrodynamics. Distributions of the flow velocities and concentrated pressure regions depend highly on the gap width of the forked caudal fin. Then, a revised hydrodynamic function depending on three nondimensional governing parameters is developed, this is, the characteristic oscillating frequency, the width ratio, and the gap-to-width ratio. Formulas for the real and -imaginary parts of the complex-valued hydrodynamic function are developed respectively through the comprehensive CFD framework. Theoretical and experimental results show that the revised hydrodynamic function and developed model are capable of estimating the hydrodynamic effect and underwater dynamic response of the MFC-actuated caudal fin. Compared with the classical hydrodynamic function for the rectangular beam, the expression for the beam overestimates the added mass effect exerted on the caudal fin, and underestimates the hydrodynamic damping effect, thus leading to a smaller estimated resonant frequency and bandwidth, but a higher predicted response peak. These findings are useful for the robotic fish or autonomous underwater vehicles which are propelled by oscillating foils actuated by smart actuators.

Large-eddy Simulation of Turbulent Channel Flows with Antifouling-Featured Bionic Microstructures

Thermodynamic Analysis of Shark Skin Texture Surfaces for Microchannel Flow

Hydrodynamic Effect and Fluid-Structure Coupled Vibration of Underwater Flexible Caudal Fin Actuated by Macro Fiber Composites

On the influence of biomimetic shark skin in dynamic flow separation

Understanding Low-Speed Streaks and Their Function and Control through Movable Shark Scales Acting as a Passive Separation Control Mechanism

Calculation and Analysis on Drag Reduction of Shark's Skin Tiny Groove Structure

Shark Skin—An Inspiration for the Development of a Novel and Simple Biomimetic Turbulent Drag Reduction Topology

Control of Flow Separation Using Biomimetic Shark Scales with Fixed Tilt Angles

Unsteady flow structures behind a shark denticle replica on the wall: Time-resolved particle image velocimetry measurements

Multi-fidelity modelling of shark skin denticle flows: insights into drag generation mechanisms

On biomimetic surface texturing and its impact on turbulent flow and hydrodynamic forces acting on an early-stage bio-fouling organism

Water repellent/wetting characteristics of various bio-inspired morphologies and fluid drag reduction testing research

Flexible Surfaces Prepared Through Direct Ink Writing with Drag Reduction and Antifouling

Dynamic behaviors of cavitation bubbles near biomimetic surfaces: A numerical study

Direct numerical simulations of turbulent boundary layers developing over synthesised calcareous marine biofouling surfaces

A Self-Cleaning Micro-Fluidic Chip Biospired by the Filtering System of Manta Rays

Progress and Perspective of Studies on Biomimetic Shark Skin Drag Reduction

The effect of shortfin mako shark skin at the reattachment of a separated turbulent boundary layer

Bidirectional Underwater Drag Reduction on Bionic Flounder Two-Tier Structural Surfaces

Research on the Drag Reduction Performance of Bionic Micro-gradient Surfaces

Constructing a Dual-Function Surface by Microcasting and Nanospraying for Efficient Drag Reduction and Potential Antifouling Capabilities.