Abstract:To mitigate the shuttle effect of Li–S batteries, a hollow microflower Mo2C/MoO2 heterostructure is synthesized using a two‐step calcining method. The H‐Mo2C/MoO2/nitrogen‐doped carbon/S cathode with the high‐sulfur loading of 6.2 mg cm−2 and a low‐electrolyte/sulfur ratio of at 1C, where the cell exhibits an excellent cycling stability, maintains a capacity of 308 mAh g−1 after 500 cycles. Lithium–sulfur batteries (Li–S batteries) have a high theoretical capacity density. However, due to the solubility of long‐chain polysulfides migration between the positive and negative electrodes driven by concentration gradients, the cycle stability of lithium–sulfur batteries is compromised, hindering their practical application. To mitigate the shuttle effect and enhance the electrochemical performance of Li–S batteries, a hollow microflower (MF) Mo2C/MoO2 heterostructure is synthesized using a two‐step calcining method. The presence of a hetero‐interface improves the electrical conduction rate, facilitating more effective charge transfer at the interface between heterogeneous components. Additionally, the increased catalytic active sites enhance the conversion of polysulfides and promote the catalytic capability. As a result, Li–S batteries with H‐Mo2C/MoO2/nitrogen‐doped carbon MFs as additives in the cathode exhibit excellent rate performance and good cycling stability. After 100 cycles at 0.2C, the capacity remains at 1071.6 mAh g−1, with a capacity retention rate of 90.6%. Notably, the Li–S batteries demonstrate a capacity decay of only 0.011% per cycle over 1000 cycles at 1C, with a specific capacity of 790 mAh g−1 retained after the cycling process. In this work, a rational approach is provided to fabricating transition‐metal carbon‐oxide heterostructures with an optimized structure to enhance the performance of Li–S batteries.

Binary Transition-Metal Sulfides/MXene Synergistically Promote Polysulfide Adsorption and Conversion in Lithium-Sulfur Batteries

Enhanced catalysis LiS<sub>3</sub> of radical-to-polysulfide interconversion <i>via</i> increased sulfur vacancies in lithium-sulfur batteries

Construction of Binary Metal Sulfide Nanoparticles to Boost Catalytic Activity for Lithium-Sulfur Batteries

Capture and Catalytic Conversion of Polysulfides by In Situ Built TiO<sub>2</sub>-MXene Heterostructures for Lithium-Sulfur Batteries

Capture and Catalytic Conversion of Polysulfides by in Situ Built TiO2‐MXene Heterostructures for Lithium–Sulfur Batteries

Synergistic Construction of Efficient Heterostructure Electrocatalysis for High-Performance Lithium–Sulfur Batteries

0D-2D multifunctional bimetallic MOF derivative-MXene heterojunction for high areal capacity lithium-sulfur batteries

Synergistic Polysulfides Adsorption–Conversion with Mo2C–MoO2 Heterostructure for Kinetically Enhanced Lithium–Sulfur Battery

Bidirectional tandem catalysis coupled with interface engineering and Se vacancies for accelerating the polysulfide conversion

Regulating Electrocatalytic Polysulfides Redox Kinetics through Manipulating Surface Electronic Structure of Molybdenum-Based Catalysts for High-Performance Lithium-Sulfur Batteries

Synergistic Adsorption-Electrocatalysis of 2D/2D Heterostructure Toward High Performance Li-S Batteries

Achieving a smooth "adsorption-diffusion-conversion" of polysulfides enabled by MnO2-ZnS p-n heterojunction for Li-S battery

Boosted Polysulfide Conversion by Co, Mn Bimetallic-Modulated Nitrogen–Carbon Material for Advanced Lithium–Sulfur Batteries

Accelerating sulfur conversion kinetics via CoS2–MgS heterostructure for lithium sulfur batteries

Bimetallic sulfides heterostructure efficient adsorption and catalytic of polysulfides for high-performance lithium-sulfur batteries

Vanadium niobium carbide (VNbCTx) bimetallic MXene derived V5S8-Nb2O5@MXene heterostructure for efficiently boosting the adsorption and catalytic performance of lithium polysulfide

Atom-dominated relay catalysis of high-entropy MXene promotes cascade polysulfide conversion for lithium–sulfur batteries

NiS2-MoS2@MXene heterostructures for enhancing polysulfide adsorption and conversion of Li S battery

Rational Design of MXene/1T‐2H MoS2‐C Nanohybrids for High‐Performance Lithium–Sulfur Batteries

Leveraging doping strategies and interface engineering to enhance catalytic transformation of lithium polysulfides for high-performance lithium-sulfur batteries

Synergizing Spatial Confinement and Dual‐Metal Catalysis to Boost Sulfur Kinetics in Lithium–Sulfur Batteries