Abstract:<p>This article studies the problems of exponential stabilization and ‐gain performance for networked control systems (NCSs) with transmission delays and periodic denial‐of‐service (DoS) attacks by exploring a resilient event‐triggered communication mechanism. First, a new resilient event‐triggered mechanism is developed to eliminate the adverse effects of network congestion caused by DoS attacks and decrease redundant communication so as to ensure efficient utilization of the limited network resources. The threshold parameter in the predefined event‐triggered condition can be adjusted according to the dynamic characteristics of the system. Then, an event‐driven control protocol is proposed, and a new switched NCS model is constructed. Sufficient conditions are then presented to ensure the exponential stability and ‐gain performance of the resulting closed‐loop system. Moreover, a co‐design scheme of the parameters in the event‐triggered condition and the controller gain is provided. Finally, the effectiveness and advantages of the new design techniques are verified through a comparative study for a robot manipulator control system.</p>
automation & control systems,engineering, electrical & electronic,mathematics, applied
What problem does this paper attempt to address?
### What problems does this paper attempt to solve?
This paper aims to solve the exponential stability and \( \mathcal{L}_2 \)-gain performance problems of networked control systems (NCSs) when they are under denial - of - service (DoS) attacks. Specifically, the research objective is to develop a dynamic event - triggering mechanism (DETM) to reduce the negative impact of DoS attacks on system communication and control performance and improve the utilization efficiency of network resources.
#### Main problem description:
1. **Network congestion and communication redundancy**: DoS attacks can lead to network congestion, increase unnecessary communication overhead, and thus reduce the overall performance of the system.
2. **Exponential stability and \( \mathcal{L}_2 \)-gain performance**: It is necessary to ensure that in networked control systems, even in the presence of transmission delays and periodic DoS attacks, the system can still maintain exponential stability and meet specific \( \mathcal{L}_2 \)-gain performance indicators.
3. **Two - channel attacks**: The paper considers the situation where the measurement output channel and the control input channel are simultaneously under DoS attacks, which increases the complexity of the problem.
#### Solutions:
To address the above challenges, the paper proposes a new dynamic event - triggering mechanism (DETM), whose main features include:
- **Dynamic threshold adjustment**: Introduce a dynamic threshold parameter \( z(t) \) that depends on the system state, which can be adaptively adjusted according to the dynamic characteristics of the system, thereby reducing unnecessary data transmission.
- **Event - driven control protocol**: Combine event - triggering conditions and control protocols to construct a new switched NCS model to ensure the exponential stability and \( \mathcal{L}_2 \)-gain performance of the system.
- **Co - design method**: Provide a method for jointly designing event - triggering condition parameters and controller gains to optimize the performance of the system.
#### Mathematical formula representation:
1. **Event - triggering condition**:
\[
t_{k + 1}h=t_kh+\min\left\{ jh\mid -e^T((t_k + j)h)\Psi e((t_k + j)h)+\sigma x^T(t_kh)\Psi x(t_kh)+\delta z((t_k + j)h)\leq0\right\}
\]
where \( e((t_k + j)h)=x((t_k + j)h)-x(t_kh) \) represents the error between the current sampling state and the latest transmitted state.
2. **Dynamic threshold update rule**:
\[
\dot{z}(t)=-2\alpha_1z(t)-\delta z(\ell h)+x^T(\ell h)\Omega x(\ell h),\quad t\in[\ell h,(\ell + 1)h)
\]
3. **Switched system model**:
\[
\begin{cases}
\dot{x}(t)=\bar{A}(t)x(t)+B[x(t-\tau_{k,n}(t))+e_{k,n}(t)]+B_w w(t),&t\in\mathcal{D}_{1,n},\\
\dot{x}(t)=\bar{A}(t)x(t)+B_w w(t),&t\in\mathcal{D}_{2,n},
\end{cases}
\]
where \( \mathcal{D}_{1,n} \) and \( \mathcal{D}_{2,n} \) represent the time intervals in the stable mode and the unstable mode of the system respectively.
Through these methods, the paper successfully solves the stability and performance problems of networked control systems under DoS attacks and provides effective solutions for practical applications.