Abstract:Extreme wetting surfaces represented by superhydrophilic and superhydrophobic surfaces have important applications in heat transfer engineering such as boiling and condensation. The droplet impact behavior is helpful to deepen the understanding of extreme wetting characteristics and guide practical engineering applications. In this study, superhydrophilic and superhydrophobic micro-nano structures were fabricated by micro embossing and subsequent chemical treatment, and the droplet impact dynamics of microstructures, nanostructures, and micro-nano structures were analyzed using water and alcohol. Alcohol has the lower surface tension and wets the fabricated surfaces more easily than water. Among all fabricated structures, micro-nano multiscale structures exhibit the most extreme droplet impact dynamics. Whether it is water or alcohol droplets, the superhydrophilic micro-nano structures show the best spreading properties, and the maximum spreading factor (the ratio of the droplet wetting diameter to the initial diameter) of water is 134.1 % higher than the flat surface, which is also higher than both the microstructures and the nanostructures. Water droplets are more likely to bounce after impacting the superhydrophobic micro-nano structures than flat and nanostructures. However, due to the pinning effect of the larger-scale microstructures, the droplets impact on micro-nano structures would break and splash while the Weber number exceeds 43.41. The high-temperature impact dynamics show that the superhydrophobic micro-nano structures has excellent high-temperature resistance and can fully bounce within the tested range. The superior bouncing properties indicates the excellent condensation potential of the superhydrophobic micro-nano structures. The superhydrophilic micro-nano structures will be beneficial to enhance boiling heat transfer engineering applications, and the boiling heat transfer of droplets on the superhydrophilic micro-nano structures is the most severe during the boiling temperature range, and the drying time after alcohol impact is similar to 63.4 % shorter than that of the superhydrophobic micro-nano structures.

Drop Impact on Submillimeter-Structured Surfaces with Different Wetting Behaviors.

Wetting Behaviors and Mechanism of Micro Droplets on Hydrophilic Micropillar-Structured Surfaces

Exploring Mechanisms of Asymmetric Droplet Impact Dynamics on Roughness Gradient Surface

Insights into Droplet Impact Dynamics on Microstructured Surfaces

Droplet impact on regular micro-grooved surfaces

Drop Impacting on a Surface with Adjustable Wettability Based on the Dielectrowetting Effect

Dynamic Behavior of Droplet Impact on Micro-Nano Structures with Extreme Wetting Properties

Droplet Impact Dynamics on Different Wettable Surfaces at Moderate Weber Numbers

Droplet impact on sparse hydrophobic pillar surface: Impact phenomena, spreading mode, and droplet breakup

Effects of the Surface Wettability of Nanoparticles on the Impact Dynamics of Droplets

Droplet impact on asymmetric hydrophobic microstructures

Drop Impact Upon Superhydrophobic Surfaces with Regular and Hierarchical Roughness

Effect of Macrostructures on Impacting Behaviors of Water Droplets on Superhydrophobic Polymer Surfaces

Regulation of Droplet Dynamic Behavior after Droplet Impact on Superhydrophobic Surfaces

Uniform Spread of High‐Speed Drops on Superhydrophobic Surface by Live‐Oligomeric Surfactant Jamming

Dynamic Behavior and Maximum Width of Impact Droplets on Single-Pillar Superhydrophobic Surfaces

Research on the Dynamic Characteristics of Micro-scale Droplet Impact

Experimental Insights into Droplet Behavior on Van der Waals and Non-Van der Waals Liquid-Impregnated Surfaces

Droplet impacting on pillared hydrophobic surfaces with different solid fractions

Investigation on dynamic characteristics of droplet impact on surfaces with different rough microstructures based on Lattice Boltzmann method

Droplet Impact on Anisotropic Superhydrophobic Surfaces.