Abstract:SPI/PBAT composite interface structure. Soy protein isolate (SPI), a widely available and inexpensive natural polymer, can be used as a filler to reduce the cost of poly(butylene adipate‐co‐terephthalate) (PBAT) materials. To improve the compatibility between SPI and PBAT, a series of polycaprolactone‐based polyurethane prepolymers (PCLPUs) with different soft segment molecular weights were synthesized and used as compatibilizers to prepare SPI/PBAT composites. At the same time, the effect of PCLPU soft segment molecular weight on the properties of SPI/PBAT composites was studied. Structural, morphological, and property analyses were carried out on the composite materials; the results showed that PCLPU was an effective compatibilizer for SPI/PBAT composite materials. The –NCO group at its end forms a urethane bond with the hydroxyl group in SPI and PBAT. At the same time, the soft segment of PCLPU is physically crosslinked with PBAT to produce a dual physical and chemical effect. The lower the soft segment molecular weight of PCLPU added, the better the performance of the SPI/PBAT composite materials. This is observed because PCLPU with a lower soft segment molecular weight contains more –NCO functional groups, which can better achieve compatibilization between SPI and PBAT through chemical crosslinking. The addition of 5% PCLPU‐500 content to the SPI/PBAT composite material increased its tensile elongation, impact strength, and tensile strength by 867%, 264%, and 150%, respectively, compared with those of the SPI/PBAT composite material without a compatibilizer, achieving toughening and strengthening with good processability and biodegradability. This work provides a simple, effective solution for preparing high‐performance, green, and low‐cost biodegradable composite materials. Highlights PBAT composites were prepared using soy protein isolate (SPI) as filler. Different types of PCLPU exist as a reactive compatibilizer for PBAT and SPI. Polycaprolactone‐based polyurethane prepolymer significantly improves the interfacial compatibility of PBAT composites. SPI/PBAT film has good degradability and is a rich source of nitrogen.

Flexible Poly(butylene Adipate-Co-butylene Terephthalate) Enabled High-Performance Polylactide/wood Fiber Biocomposite Foam

Super toughened blends of poly(lactic acid) and poly(butylene adipate- co -terephthalate) injection-molded foams via enhancing interfacial compatibility and cellular structure

Dynamic Cross-linked Poly(butylene adipate- co -terephthalate) for High-Performance Green Foam

High-Strength Bio-Degradable Polymer Foams with Stable High Volume-Expansion Ratio Using Chain Extension and Green Supercritical Mixed-Gas Foaming

FDM 3D Printing and Properties of WF/PBAT/PLA Composites

Effects of Wood Content and Modification on Properties of Wood Flour/Polybutylene Adipate Terephthalate Biocomposites

Construction of highly ductile, UV-shielding polylactide/poly(butylene adipate- co -terephthalate) biocomposites with hyperbranched polysiloxane functionalized lignin as a biocompatibilizer

Preparation and mechanism of lightweight wood fiber/poly(lactic acid) composites

Preparation and Characterization of Polylactic Acid/Bamboo Fiber Composites.

Enhancing the Antishrinkage and Mechanical Performances of the PBAT/PVA Foam for Environment-Friendly Packaging

High-expansion-ratio PLLA/PDLA/HNT composite foams with good thermally insulating property and enhanced compression performance via supercritical CO2

Fully biodegradable polylactide foams with ultrahigh expansion ratio and heat resistance for green packaging

Synergistic reinforcement of polylactic acid/wood fiber composites by cellulase and reactive extrusion

Polybutylene adipate terephthalate/polylactic acid interface enhanced compatibilization and its bead-foaming characteristics

Fabrication of biodegradable poly (lactic acid)/carbon nanotube nanocomposite foams: Significant improvement on rheological property and foamability

Construction of a Highly Oriented Poly(lactic acid)-Based Block Polymer Foam and Its Self-Reinforcing Mechanism

Green Preparation of Biodegradable Poly (butylene Adipate-Co-terephthalate) Foam Modified with Bio-Based Epoxidized Cardanol Using Supercritical Fluid Foaming

Strategy for the Preparation of PBAT/Starch Blended Foam with High Resilience and Shrinkage Resistance

Reinforcing a Thermoplastic Starch/Poly(butylene adipate-co-terephthalate) Composite Foam with Polyethylene Glycol under Supercritical Carbon Dioxide

Fabrication of Biodegradable Poly(butylene Adipate-Co-butylene Terephthalate) Bead Foams Through Solid Utilization of Chitin and Controllable Incorporation of Porous Structure

Biodegradable composites from poly(butylene adipate‐co‐terephthalate) with soybean protein isolate: Preparation, characterization, and performances