Abstract:Transparent conductive electrodes (TCEs) are important components of various optoelectronic devices and commonly used in solar cells, touch screens and other display technologies. The most widely used material for industrial applications of TCEs is indium tin oxide (ITO), which has a low sheet resistance of less than 100 Ω sq−1, and high optical transparency of ~90%. However, ITO-based TCEs are relatively expensive owing to the scarcity of the indium supply and the high sputtering processing costs. In addition, ITO films are brittle, which limits their application as flexible and stretchable components in future electronic devices. In order to address these concerns, various emerging materials such as graphene, carbon nanotubes (CNTs), conductive polymers, and metal NWs are being considered as alternatives to ITO. Among these candidate replacements, Group 11 metal NWs, especially silver NWs (Ag NWs) have garnered special interest owing to their excellent electrical and optical properties; and, solution-processability. Ag NWs are usually prepared and suspended in a solution and the resultant colloidal ink is used to coat plastic film or other substrates by spin-coating with Mayer bar or roll-to-roll processing to create transparent conducting sheets. Highly transparent and conductive Ag NW based thin films have been fabricated with a sheet resistance of <20 Ω sq−1 and a transmittance of ∼90%, which is similar to the performance of commercial ITO substrates. However, Ag NWs-based electrodes suffer from inherent limitations that restrict their applicability. One major issue is that Ag NWs are prone to oxidation, which limits their functional processability and lifetime. Coating the Ag NWs with a protective metal oxide (e.g. TiO2, SnO2, ZnO) has the potential to substantially improve the chemical, thermal and mechanical stabilities of Ag NWs. However, the preparation of a metal oxide protection coating usually requires depositing the metal oxide in a vacuum on a prepared film, which is not suitable for roll-to-roll continuous production of films with large areas. Fabrication of highly conductive and air-stable Ag NWs-based electrodes via an all-solution process for flexible and transparent applications remains a challenge. Here, we developed a nucleation mediated method using nanowire seeds for the selective synthesis of uniform Ag NWs via polyol syntheses. The seed-mediated polyol approach gives Ag NWs with high reproducibility (>90% in numerous repetitions of the synthesis), high processing efficiency (grams or more are possible for each synthesis run), and high aspect ratios (>2000), with average dimensions of L> 100 µm and D < 50nm.The Ag@TiO2 NWs subsequently created by surface modification of the Ag NWS have a substantially higher thermal stability than Ag NWs which have the same diameter, and can be annealed to 300 ˚C. Transparent conductive films can be prepared by simple vacuum filtration or by spin coating onto an appropriate filter paper and then by direct transfer to the desired glass or plastic substrate.Therefore, Ag@TiO2 nanowires are ideal candidates for transparent electrodes with good conductivity, high transmittance and low haze, and are demonstrated to be thermally and chemically stable for long-term applications.

Flexible Transparent Conductive Films of Ag/Cr2O3 Core–Shell Nanowires As Electrodes for Electroluminescent Devices and Heaters

Ultrathin Ag@ZnO Core–Shell Nanowires for Stable Flexible Transparent Conductive Films

Highly Reliable MoOx/Ag NW Bilayer Transparent Conductive Thin Films Fabricated by All Solution Process and Transparent Heater Application

Scalable coating and properties of transparent, flexible, silver nanowire electrodes

Silver Nanowire Network for Flexible Transparent Electrodes Based on Spray Coating at a Low DC Electric Field and Plasma Treatment

(Invited) Synthesis of Thermally and Chemically Stable Silver Nanowires for Transparent Electrode

Cost-Effective Fabrication of Uniformly Aligned Silver Nanowire Microgrid-Based Transparent Electrodes with Higher Than 99% Transmittance

High Performance Silver Nanowire based Transparent Electrodes Reinforced by EVA Resin Adhesive

Large-Area And Uniform Silver Nanowires Based Transparent Electrodes On Rigid And Flexible Substrates Fabricated By Polymethylmethacrylate-Assisted Spin-Coating

An electrochemically stable Ag@Au-Co core-shell nanowire network-based transparent conductor for flexible self-powered Zn-based electrochromic smart devices

A Room-Temperature Environmentally Friendly Solution Process to Assemble Silver Nanowire Architectures for Flexible Transparent Electrodes

Enhanced Adhesion of Ag Nanowire Based Transparent Conducting Electrodes for Application in Flexible Electrochromic Devices

One-step Synthesis of Ultra-High Aspect Ratio Silver Nanowires for High-Performance Flexible Transparent Conductive Films

TiO2-Coated Core-Shell Ag Nanowire Networks for Robust and Washable Flexible Transparent Electrodes

Highly Conductive, Air-Stable Silver Nanowire@Iongel Composite Films Toward Flexible Transparent Electrodes

Flexible high-performance SnO2/AgNWs bilayer transparent conductors for flexible transparent heater applications

Low-temperature Solution Processed Flexible Silver Nanowires/zno Composite Electrode with Enhanced Performance and Stability

Highly Stable Transparent Conductive Electrodes Based on Silver-Platinum Alloy-Walled Hollow Nanowires for Optoelectronic Devices

Facile Synthesis of Silver Nanowires with Different Aspect Ratios and Used as High-Performance Flexible Transparent Electrodes

The Development and Application of Silver Nanowires As Flexible Transparent Electrodes

Flexible Transparent Electrodes Based on Silver Nanowires: Material Synthesis, Fabrication, Performance, and Applications