Abstract:Purpose: Mechanical properties of dental composite resins need to be improved in order to enhance their performance for applications in direct restorations. Application of nanoparticles in this field is a recent development. The aim of this study was to investigate the mechanical properties of experimental composites containing various mass fractions of silica nanoparticles. Materials and methods: Experimental composites were composed of a visible-light-curing monomer mixture (70 wt% Bis-GMA and 30 wt% TEGDMA) and silica nanoparticles of a size ranging from 20 nm to 50 nm modified with gamma-methacryloxy propyl trimethoxy silane (gamma-MPS) as reinforcing filler. The composites were classified into four groups according to their filler mass fractions ranging from 20% to 50%. Following the same preparation procedure, a conventional composite was also fabricated consisting of a mass percentage of 60% silica fillers having particle sizes ranging from 10 microm to 40 microm in the same organic matrix, which served as control. Ten specimens were prepared of each experimental group and also of the control. Fracture toughness was measured using single-edge notched bend (SENB) specimens. Specimen fracture surfaces were mounted on aluminum stubs with carbon cement, sputter-coated with gold and examined under scanning electron microscopy (SEM). Flexural strength was evaluated through a standard three-point bending test and Vickers microhardness test was performed to investigate the hardness of the samples. Results: Filler mass fraction had a significant effect on composite properties. Fracture toughness, flexural strength, and hardness of composites at filler mass fraction of 40% of silica nanoparticles were (mean +/- SD) 1.43 +/- 0.08 MPa.m(1/2), 149.74 +/- 8.14 MPa, and 62.12 +/- 3.07 VHN, respectively; relevant values for composites at 50% mass fraction of silica nanoparticles were 1.38 +/- 0.07 MPa.m(1/2), 122.83 +/- 6.13 MPa, and 70.69 +/- 3.67 VHN, respectively, all of which were significantly higher than 1.07 +/- 0.06 MPa.m(1/2), 104.61 +/- 8.73 MPa, and 52.14 +/- 4.02 VHN of the control, respectively (Tukey's multiple comparison test; family confidence coefficient = 0.95). Measured values for composites at 20% mass fraction of silica nanoparticles were 0.94 +/- 0.06 MPa.m(1/2), 103.41 +/- 7.62 MPa, and 42.87 +/- 2.61 VHN, respectively; relevant values for composites at 30% mass fraction of silica nanoparticles were 1.16 +/- 0.07 MPa.m(1/2), 127.91 +/- 7.05 MPa, and 51.78 +/- 3.41 VHN, respectively. Conclusions: Reinforcement of dental composite resins with silica nanoparticles resulted in a significant increase in the evaluated mechanical properties in comparison with the conventional composite. The filler mass fraction played a critical role in determining the composite's mechanical properties.

Synthesis of Pore-Size-Tunable Porous Silica Particles and Their Effects on Dental Resin Composites.

Size-controllable synthesis of dendritic porous silica as reinforcing fillers for dental composites

Micromechanical Interlocking-Inspired Dendritic Porous Silica-Based Multimodal Resin Composites for the Tooth Restoration

Characterization of Mesoporous Silica Nanoparticle Composites at Low Filler Content

The Properties of Dental Resin Composites Reinforced with Silica Colloidal Nanoparticle Clusters: Effects of Heat Treatment and Filler Composition

Preparation and characterization of POSS‐SiO2/cyanate ester composites with high performance

Preparation and Characterization of Silane-Modified SiO2 Particles Reinforced Resin Composites with Fluorinated Acrylate Polymer.

Spray-drying-assisted fabrication of CaF2/SiO2 nanoclusters for dental restorative composites

Efficient Construction of SiO2 Colloidal Nanoparticle Clusters As Novel Fillers by a Spray-Drying Process for Dental Composites

Effect of the Amount of Silane Coupling Agent γ-MPS on Properties of ZrO2-SiO2 Based Dental Resin Composites

Effects of Framework Structure and Coupling Modification on the Properties of Mesoporous Silica/Poly(Methyl Methacrylate) Composites

Improved dielectric and mechanical properties of silica/epoxy resin nanocomposites prepared with a novel organic–inorganic hybrid mesoporous silica: POSS–MPS

Synthesis and characterization of core-shell nanoparticles and their application in dental resins

Core-shell structured SiO2@ZrO2@SiO2 filler for radiopacity and ultra-low shrinkage dental composite resins

Design of Resin Composites with Enhanced Physical–mechanical Properties

Ca-Doped Mesoporous SiO2/dental Resin Composites with Enhanced Mechanical Properties, Bioactivity and Antibacterial Properties.

Preparation of Ca Doped Wrinkled Porous Silica (Ca-Wps) for the Improvement of Apatite Formation and Mechanical Properties of Dental Resins.

Effect of Silica Nanospheres Silanized by Functional Silanes on the Physicochemical and Mechanical Properties of Bis-GMA/TEGDMA Dental Composite Resin by Photocuring Synthesis

Comparative Assessments of Dental Resin Composites: A Focus on Dense Microhybrid Materials

Investigation of mechanical properties of experimental Bis-GMA/TEGDMA dental composite resins containing various mass fractions of silica nanoparticles

Micromechanical interlocking structure at the filler/resin interface for dental composites: a review