Abstract:Traditional spring-tendon-driven self-adaptive prosthesis hand, such as the Stark Hand, uses multiple springs to realize self-adaptive grasping, and uses tendon to drive finger extension. Its grasping force is related to joint angle, and its grasping force is not adjustable, which affects its use effect. This paper develops a novel coupled and self-adaptive anthropomorphic robot finger with a dual-oblique-belt mechanism (COSA-DOB finger). The COSA-DOB finger consists of a base, three phalanges, three joint shafts, a motor, a transmission mechanism, two gears, seven transmission wheels, two transmission belts and two springs. This paper presents the motion process and grasping force analysis of the finger, and discusses the grasping performance of COSA-DOB finger. The experimental results show that the COSA-DOB finger can achieve three-joint coupled and self-adaptive grasping. In the finger, three joints rotate at the same time, suitable for the accurate grasping of the end phalange. When the proximal phalange contacts the object, the proximal joint stops rotating, and the next joint continues to rotate $\dots$ until the end phalange contacts the object, so as to realize the force-type envelope grasping of the object. For objects of different shapes and sizes, the finger self-adapts. According to the different positions of the object, the finger can automatically switch between the two modes of the coupling grasping and the self-adaptive grasping.

Design and Motion Analysis of an Underactuated Finger Based on the Coupled and Self-Adaptive Linkage Mechanism

Design, Analysis, and Experiment of a Coupled-Adaptive Underactuated Prosthetic Handbased on Linkage Mechanisms

Design of a Highly Integrated Underactuated Finger Towards Prosthetic Hand.

A Bioinspired Gripper with Sequential Motion and Mutable Posture Enabled by Antagonistic Mechanism

Humanoid Design of Mechanical Fingers Using a Motion Coupling and Shape-Adaptive Linkage Mechanism

Design of Humanoid Robotic Hand Based on Link Underactuation

Two-Dof Coupled and Self-Adaptive (cosa) Finger: A Novel Under-Actuated Mechanism

Kinematic Analysis of A Novel Couple-Adaptive Underactuated Finger Mechanism

Under-actuated joint design in mechanical hand based on analysis of link-slip block mechanism

A novel coupled gesture-changeable under-actuated robotic finger with linkage and gear-rack mechanism

Design of an Underactuated Finger Based on a Novel Nine-Bar Mechanism

Multisensory Integrated Dexterous Finger With Coupled-Adaptive Features

Development of a Multi-DOF Anthropomorphic Prosthetic Hand

Design and Testing of a Self-Adaptive Prosthetic Finger with a Compliant Driving Mechanism.

Development of an Anthropomorphic Prosthetic Hand with Underactuated Mechanism

Linkage under-actuated humanoid robotic hand linkage under-actuated humanoid robotic hand

A Novel Coupled and Self-adaptive Anthropomorphic Robot Finger with a Dual-oblique-Belt Mechanism.

Development of a Linear-Parallel and Self-Adaptive Under-Actuated Hand Compensated for the Four-Link and Sliding Base Mechanism

Kinematics Simulation for a New Kind of Underactuated Robotic Finger

Design and Analysis of an Under-Actuated Self-Adaptive Mechanical Hand

Optimization of a Novel Anthropomorphic Three-Jointed Underactuated Finger Mechanism