Abstract:The inherent disadvantages of carbon-based anodes, including their low hydrophilicity, significant charge transfer resistance, and limited power density, hinder their widespread commercial utilization in microbial fuel cells (MFC). Addressing these challenges, this study involved the surface modification of a carbon-based anode. To improve the adhesion of electroactive microorganisms (EAM) on the anode surface and increase the extracellular electron transfer rate, CNT@Ti 3 C 2 T x MXene was applied to the surface of carbon cloth (CC) using drip coating. Initially, we conducted a comprehensive investigation on the optimal amount of modification required. To achieve this, we designed four distinct groups of modified electrodes. Through electrochemical analysis and phase characterization, it was determined that a modification dosage of 1.5 mg/cm 2 for CNT@Ti 3 C 2 T x MXene/CC electrodes yielded the most optimal electrical conductivity and the highest capacitance. The Rs of CC is reduced from 1.48 to 0.55 Ω and the Rct from 2.62 to 2.09 Ω, and the capacitance is increased from 3.98 10 −07 F to 9.11 10 −06 F . Subsequently, the CNT@Ti 3 C 2 T x MXene/CC with a modification of 1.5 mg/cm 2 was used as the anode of the microbial fuel cell. The modification of CNT@Ti 3 C 2 T x MXene improved the power generation performance. The maximum output voltage of the MFC was increased from 546 to 709 mv, and the power density was increased from 44.9 to 101.8 mW/m 2 . The underlying factor lies in the ability of CNT@Ti 3 C 2 T x MXene/CC to significantly lower the internal resistance within the microbial fuel cell, thereby fostering the development of biofilm. Notably, our observations revealed that the biofilm formation was particularly facilitated on the anode surface of CNT@Ti 3 C 2 T x MXene/CC. In essence, the CNT@Ti 3 C 2 T x MXene-modified carbon cloth not only minimizes internal resistance but also enhances the electroactive surface area, exhibiting superior electrical conductivity. These attributes make it an advantageous material for biological applications.

Vanadium nitride decorated carbon cloth anode promotes aniline degradation and electricity generation of MFCs by efficiently enriching electroactive bacteria and promoting extracellular electron transfer

Porous α-Fe2O3 nanofiber combined with carbon nanotube as anode to enhance the bioelectricity generation for microbial fuel cell

Porous -Fe<sub>2</sub>O<sub>3</sub> nanofiber combined with carbon nanotube as anode to enhance the bioelectricity generation for microbial fuel cell

High-Capacitance Manganese Dioxide Oxide/Carbon Nanotube/Carbon Felt as a Bioanode for Enhanced Energy Output in Microbial Fuel Cells

Nano-Fe3C@2D-NC@CC as anode for improving extracellular electron transfer and electricity generation of microbial fuel cells

CNFs@MnO2 nanofiber as anode for improving extracellular electron transfer of microbial fuel cells

Enhanced microorganism attachment and flavin excretion in microbial fuel cells via an N,S-codoped carbon microflower anode

Enhanced performance of a microbial fuel cell using CNT/MnO2 nanocomposite as a bioanode material.

A Carbon-Cloth Anode Electroplated with Iron Nanostructure for Microbial Fuel Cell Operated with Real Wastewater

Enhanced Electricity Generation for Microbial Fuel Cell by Using Electrochemical Oxidation to Modify Carbon Cloth Anode

3D Hierarchical Co8FeS8-FeCo2O4/N-CNTs@CF with an Enhanced Microorganisms-Anode Interface for Improving Microbial Fuel Cell Performance

Enhanced performance of acridine degradation and power generation by microbial fuel cell with g-C3N4/PANI-DA/CF anode

Carbon nanofiber/graphene hybrids anchoring Fe, N, S heteroatoms simultaneously enhancing extracellular electron transfer and biofilm adhesion in microbial fuel cells

Enhancing extracellular electron transfer through selective enrichment of Geobacter with Fe@CN-modified carbon-based anode in microbial fuel cells

Activated nitrogen-doped ordered porous carbon as advanced anode for high-performance microbial fuel cells

N-Doped Carbon Nanowire-Modified Macroporous Carbon Foam Microbial Fuel Cell Anode: Enrichment of Exoelectrogens and Enhancement of Extracellular Electron Transfer

Biochar-supported Fe3C Nanoparticles with Enhanced Interfacial Contact As High-Performance Binder-Free Anode Material for Microbial Fuel Cells

Heteroatom-doped porous carbon nanoparticle-decorated carbon cloth (HPCN/CC) as efficient anode electrode for microbial fuel cells (MFCs)

CNT@Ti3C2TxMXene Nanocomposite Catalysts as Anodes to Improve the Electricity Production Performance of Microbial Fuel Cells

Binder-free graphene and manganese oxide coated carbon felt anode for high-performance microbial fuel cell

Carbon nanotube powders as electrode modifier to enhance the activity of anodic biofilm in microbial fuel cells.