Dynamic deformation monitoring and scenario simulation of the Xiaomojiu landslide in the Jinsha River Basin, China

Chenglong Zhang,Zhenhong Li,Mingtao Ding,Wu Zhu,Bo Chen,Jianqi Zhuang,Jiantao Du,Jianbing Peng

DOI: https://doi.org/10.1007/s10346-023-02103-w

IF: 6.153

2023-07-07

Landslides

Abstract:The Xiaomojiu landslide is a typical high-elevation, long-runout landslide located in the Jinsha River Corridor. In this study, sequential InSAR time-series estimation was used to calculate the line of sight (LOS) surface displacements with descending and ascending Sentinel-1 images, and it turned out that the cumulative LOS surface displacement of the landslide was up to −78.4 mm during the period from October 2017 to April 2021 with the maximum LOS surface displacement rate of −38.5 mm/year. The landslide body could be divided into five zones (A, B1, B2, B3, and C) according to its topographical characteristics together with the LOS surface displacement time series. Combining engineering geological characteristics, LOS cumulative surface displacements with site investigation suggest that the Xiaomojiu landslide is likely to be a precipitation-triggered ancient traction rock landslide at the accelerated deformation stage. A dynamic simulation of the Xiaomojiu landslide with the PFC3D software shows that it could take approximately 65 s for the Xiaomojiu landslide from start-up to acceleration to deceleration to build-up of a barrier lake, followed by a simulation from the barrier lake to outburst floods with the HEC-RAS software indicating that the maximum depth of the outburst floods could be 13.5 m (15%), 24.6 m (25%), 42.1 m (50%), and 50.3 m (75%) along Qinghai-Tibet Plateau Transportation Corridor (QTPTC). It is believed that the results of this study provide a reference for landslide prevention along the QTPTC and the Jinsha River.

geosciences, multidisciplinary,engineering, geological

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the dynamic deformation monitoring and scenario simulation of the Xiaomujiu landslide in the Jinsha River Basin. Specifically, the research aims to:

1. **Use InSAR technology for landslide surface displacement monitoring**: By using the descending and ascending orbit images of Sentinel - 1 satellite, calculate the line - of - sight (LOS) surface displacement of the landslide to monitor the dynamic changes of the landslide.
2. **Landslide zoning and surface evolution mechanism analysis**: According to the topographic features and LOS surface displacement time series, divide the landslide body into five regions (A, B1, B2, B3, and C). Combined with engineering geological features, LOS cumulative surface displacement and on - site investigations, reveal the surface evolution mechanism and instability mode of the landslide.
3. **Seasonal deformation fluctuation analysis**: Use wavelet tools (continuous wavelet transform CWT, cross - wavelet transform XWT and wavelet coherence WTC) to analyze InSAR time - series data, and explore the seasonal changes of landslide surface displacement and its relationship with precipitation and atmospheric delay.
4. **Landslide - barrier lake - dam - break flood disaster chain simulation**: Use PFC3D software for landslide dynamic simulation, predict the process of the landslide from initiation to acceleration and then to deceleration to form a barrier lake, and use HEC - RAS software to simulate the flood evolution process after the barrier lake breaks, and evaluate its impact on the Qinghai - Tibet Plateau traffic corridor (QTPTC) and the lower reaches of the Jinsha River.

Through these methods, the research aims to provide a reference basis for landslide prevention and control in the Jinsha River Basin and along the QTPTC.