Abstract:Dihydrogen (H2) is considered nowadays as a sustainable energy carrier and exhibits a high energy density in its highly compressed state. Different countries in the world are developing industrial production and are scaling up water electrolysis processes with clear roadmaps. Alkaline water electrolysis is an affordable technology that avoids the use of platinum group metals with a good compromise of efficiency because of the development of new cost-effective and Earth-abundant materials of electrodes and new anion-exchange membranes. Here, we report on the use of emerging and selective laser melting (SLM) technology for the three-dimensional (3D) printing of binary alloyed NiFe, NiMo, NiCr, and NiCo electrode materials at an applied scale. These materials are preliminarily tested for hydrogen and oxygen evolution half-reactions in alkaline conditions to select the most promising combinations of cathode/anode combinations for overall water electrolysis. On the basis of three key performance metrics (KPMs, namely, overpotential values at 10 and 50 mA cm–2 and the stability in operation over 6 days at 50 mA cm–2), NiCr and NiCo are preferred for the cathode, whereas the anode is NiMo or NiFe. Moreover, to facilitate the release of the electrogenerated gas bubbles, the patterning of 3D-printed electrodes with either roughly conical holes or ramps is considered as a third experimental factor. The water electrolysis process is then fully optimized using the formalism of design of experiments (DOE), which allows to reduce the number of experiments without loss in the quality of conclusions. This study reveals that NiCo and NiMo will be preferentially used as the cathode and anode, respectively, to decrease the cell overvoltage, whereas NiFe as the anode yields the best stability in operation. Besides, the impact of the patterns printed by SLM on the KPMs is somewhat limited, even though the presence of holes is rather beneficial for decreasing cell overvoltage. Interestingly, an approximate calculation of the consumed energy for the production of 1 kg of H2 from the combination of NiCo/NiMo/holes as the cathode/anode/pattern yields 50.6 kWh/kg of H2, which is quite promising if one refers to the 48 kWh industrial target set by European Union for 2030.

Hydrophilic and Conductive 3D-Printed Electrocatalysts in Hydrogen Evolution Reaction for Undergraduate Experiments

In Situ Construction of Ni Enriched Porous NiAl As Long-Lived Electrode for Hydrogen Evolution at High Current Densities

3D Printed Nickel–Molybdenum-Based Electrocatalysts for Hydrogen Evolution at Low Overpotentials in a Flow-Through Configuration

Bi-metallic electrochemical deposition on 3D pyrolytic carbon architectures for potential application in hydrogen evolution reaction

Design of Ph‐universal Electrocatalysts for Hydrogen Evolution Reaction

Construction of Biomass-Derived Hybrid Electrodes for High-Performance Hydrogen Evolution Reaction

Insights into the Principles, Design Methodology and Applications of Electrocatalysts Towards Hydrogen Evolution Reaction

Hydrogen Evolution Reaction Performance of Ni-Co-Coated Graphene-Based 3D Printed Electrodes

High-current decoupled hydrogen and oxygen evolution via nickel–cobalt based redox mediators and bifunctional catalyst of 3D printing substrates

Direct photo-curing 3D printing of nickel-based electrocatalysts for highly-efficient hydrogen evolution

Two-Dimensional Layered Materials: High-Efficient Electrocatalysts for Hydrogen Evolution Reaction

Optimization of Three-Dimensional-Printed Catalytic Electrodes for Alkaline Water Electrolysis Guided by the Experimental Design Methodology

Three-Dimensional Cathode Constructed Through Confined-Growth of FeP Nanocrystals in Ordered Mesoporous Carbon Film Coated on Carbon Cloth for Efficient Hydrogen Production

Recent Advances in Electrocatalysts for Efficient Hydrogen Evolution Reaction

Ternary Platinum-Copper-Nickel Nanoparticles Anchored to Hierarchical Carbon Supports As Free-Standing Hydrogen Evolution Electrodes.

Electrodeposited large-area nickel-alloy electrocatalysts for alkaline hydrogen evolution under industrially relevant conditions

Recent Progress in Graphene-Based Electrocatalysts for Hydrogen Evolution Reaction

Thermal oxidation–electroreduction modified 3D NiCu for efficient alkaline hydrogen evolution reaction

Advanced noble-metal/transition-metal/metal-free electrocatalysts for hydrogen evolution reaction in water-electrolysis for hydrogen production

Conductive Polymer Hydrogel-Derived 3D Nanostructures for Energy and Environmental Electrocatalysis

Constructing Three-Dimensional Porous Ni/Ni3S2 Nano-Interfaces for Hydrogen Evolution Electrocatalysis under Alkaline Conditions