Abstract:<p>The Ultra High Voltage Direct Current (UHVDC) systems under hierarchical connection, while improving the voltage support and current assimilative capacity of the receiving-end system, also bring new challenges to the security and stability of the power grid. An AC short-circuit fault at the receiving-end system can easily induce commutation failures (CFs) of the high-end and low-end converter at the same time, which seriously affects the stability of the system. Therefore, it is urgent to study the coordinated control strategy for the commutation failures of UHVDC systems under hierarchical connection. This paper analyzes the coupling mechanism and CFs characteristics of the high-end and low-end converters of a UHVDC system under hierarchical connection. Based on the commutation area theory of the three-phase full-wave bridge circuit, a coordinated control strategy is proposed to suppress CFs of the non-faulty layer converter of the UHVDC system under hierarchical connection. It can reserve enough extinction area for the non-faulty layer converter after an AC system failure occurs, thus preventing the occurrence of commutation failure. Finally, based on PSCAD/EMTDC, Zhundong-Wannan ±1100 kV UHVDC was built and the effectiveness of the proposed control strategy was simulated and verified. The simulation results show that the proposed control strategy can effectively suppress the simultaneous commutation failure of inverter station converters when symmetrical faults and asymmetrical faults of different levels occur in the receiving-end grid. This has important engineering significance for improving the stability of the DC transmission system.</p>

Coordinated Control Strategy for Fault-Blocking of Modular Multilevel Converter in Hybrid Cascaded Ultra High Voltage Direct Current Transmission Systems Based on Protection Signal

A Comprehensive Control Method with Model Predictive Function of MMC-HVDC System under Unbalanced Grid Faults

A Feasible Coordination Protection Strategy for MMC-MTDC Systems under DC Faults

Control Strategies for LCC-MMC Hybrid DC System Connected to Passive Networks

Research on an Asymmetric Fault Control Strategy for an AC/AC System Based on a Modular Multilevel Matrix Converter

Energy-balancing Control Strategy for Modular Multilevel Converters under Submodule Fault Conditions

AC and DC Current Hybrid Control Strategy for Modular Multilevel Converter

A Fault-Tolerated Control Strategy for Sub-Module Faults of Modular Multilevel Converters

Control of Modular Multilevel Converter Under Imbalance of AC Power System

Modulation and Control of a New Alternate Arm Multilevel Converter for High-Voltage Direct Current System with Direct Current Fault Ride-Through Capability

A MMC Topology with AC Short-Circuit Fault Ride-Through Capability and its Control Strategies

Control Strategy For Modular Multilevel Converters In Sub-Module Fault State

A Control Strategy for Ground Fault on the AC Side of MMC-HVDC System

The Coordinated Fault Current Limiting Strategy for a Hybrid Multilevel Modular Converter (MMC) Based VSC-HVDC Applications

Hybrid High-Voltage Direct Current Topology with Line Commutated Converter and Modular Multilevel Converter in Series Connection Suitable for Bulk Power Overhead Line Transmission

Fault Characteristics and Control Strategies of Multiterminal High Voltage Direct Current Transmission Based on Modular Multilevel Converter

The Control Strategy Of Unidirectional Current H-Bridge Mmc Based Hybrid Hvdc System

A control strategy of converters based on constant extinction area for UHVDC system under hierarchical connection

Analysis and Control of Modular Multilevel Converter Based HVDC Transmission Systems During Grid Faults

Analysis of Fault and Protection Strategy of a Converter Station in MMC-HVDC System

Enhanced Ride-Through Capability under Rectifier-Side AC Fault for Series LCC-MMC Hybrid HVDC System