Abstract:Abstract We propose a wide-band metamaterial perfect absorber (MPA), using the coupling in the near-field of a quadruple split-ring resonator concentric with crossed ellipses. We designed the MPA with a metal–insulator-metal (MIM) structure for use in thermal energy harvesting. A gradient-based optimization approach was carried out to maximize the absorption of infrared (IR) radiation around 10 μm. Owing to the near-field coupling of resonators with optimal design parameters, the peaks of the absorption responses approach each other, thus broadening the overall bandwidth with almost unity absorptivity. The proposed design has a resonance at 10 μm resulting from magnetic polaritons (MPs) and thus maintains high absorption above 99% up to a range of incident-angles greater than 60° and exhibits a polarization-free behavior due to symmetry. When the optimal design was numerically examined to fabrication tolerances, it showed negligible sensitivities in the absorptivity with respect to design parameters. The strong electric field enhancement inside the split-ring gaps and between the ends of the cross arms and the surrounding ring enables designing MIM diodes to rectify the harvested thermal radiations at 288 K. MIM diodes can be built by the deposition of thin insulators to sit in these gaps. The MIM diode and MPA work together to harvest and rectify the incident IR radiation in a manner similar to the operation of rectennas. The MPA outperforms the traditional nano-antennas in impedance matching efficiency because of its higher resistance. Also, its dual-polarization reception capability doubles the rectenna efficiency. Our proposed MPA retained absorptivity more than 99% when coupled with MIM diodes whose resistances are in the range of 500 Ω–1 MΩ.

Polarization-insensitive metamaterial perfect absorber in near-infrared band based on trapezoidal silver array

A Planar Broadband Metamaterial Absorber With The Polarization Insensitive And Omnidirectional Absorption In The Min-Infrared Regime

Polarization-insensitive wide-angle multiband metamaterial absorber with a double-layer modified electric ring resonator array

Dual-polarized Bidirectional Three-Dimensional Metamaterial Absorber with Transmission Windows

Ultra-Thin Dual-Band Polarization-Insensitive and Wide-Angle Perfect Metamaterial Absorber Based on a Single Circular Sector Resonator Structure

Design Of The Infrared Selective Thermal Radiation Based On Metamaterials

Toroidal Dipole Excitation in Metamaterial Perfect Absorber Consisting of Dielectric Nanodisks Quadrumer Clusters and Spacer on Metal Substrate

Polarization-independent wide-angle triple-band metamaterial absorber

A Polarization-Dependent Wide-Angle Three-Dimensional Metamaterial Absorber

Polarization-sensitive metamaterial absorber based on the composite grating structure in the long-wave infrared band

Six-band Polarization-Insensitive Perfect Metamaterial Absorber Using L-shaped Resonators

Dual-band Perfect Absorbers Based on the Magnetic Resonance and the Cavity Resonance

Multi-band and Polarization Insensitive Metamaterial Absorber

A Polarization-insensitive Metamaterial Absorber with both Low and High Frequency Absorption Based on Magnetic Material

Polarization Insensitive Metamaterial Absorber with Wide Incident Angle

High-Performance Ultra-Broadband Absorber for Polarized Long-Wavelength Infrared Light Trapping

Triple-band polarization-insensitive wide-angle ultra-thin planar spiral metamaterial absorber

Wide-angle, wide-band, polarization-insensitive metamaterial absorber for thermal energy harvesting

Ultrathin Triple-Band Polarization-Insensitive Wide-Angle Compact Metamaterial Absorber

Ultra Narrow Dual-Band Perfect Absorber Based on a Dielectric−Dielectric−Metal Three-Layer Film Material

A polarization-dependent near-infrared metamaterial absorber based on the hybrid halide perovskite in two orthogonal directions