Abstract:Organic fouling and inorganic scaling are the main hurdles for efficient operation of reverse osmosis (RO) technology in a wide range of applications. This study demonstrates dual-functionality surface modification of thin-film composite (TFC) RO membranes to simultaneously impart anti-scaling and anti-fouling properties. Two different grafting approaches were adapted to functionalize the membrane surface with sulfonic groups: (i) non-specific grafting of vinyl sulfonic acid (VSA) via redox radical initiation polymerization and (ii) covalent bonding of hydroxylamide-O-sulfonic acid (HOSA) to the native carboxylic groups of the polyamide layer via carbodiimide mediated reaction. Both approaches to graft sulfonic groups were effective in increasing surface wettability and negative charge density of the TFC-RO membranes without significant alteration of water and salt permeabilities. Importantly, we verified through surface elemental analysis that covalently bound HOSA effectively covers the native carboxylic groups of the PA layer. Both the VSA and HOSA membranes exhibited lower flux decline during silica scaling and organic (alginate) fouling relative to the control unmodified membrane, demonstrating the unique versatility of sulfonic groups to endow the TFC-RO membranes with dual functionality to resist scaling and fouling. In particular, the HOSA membrane showed excellent physical cleaning efficiencies with water flux recoveries of 92.5 +/- 1.0% and 88.4 +/- 6.4% for silica scaling and alginate fouling, respectively. Additional results from silica nucleation experiments and atomic force measurements provided insights into the mechanisms of improved resistance to silica scaling and organic fouling imparted by the surface-functionalized sulfonic groups. Our study highlights the promise of controlled functionalization of sulfonic groups on the polyamide layer of TFC membranes to enhance the applications of RO technology in treatment and reuse of waters with high scaling and fouling potential. (C) 2020 Elsevier Ltd. All rights reserved.

Ph-Responsive Chitosan Sacrificial Layer for Simultaneous Enhancement of Ultrafiltration Performance and Sustainable Membrane Fouling Control

Zwitterion-like, Charge-Balanced Ultrathin Layers on Polymeric Membranes for Antifouling Property.

A Sacrificial Protective Layer As Fouling Control Strategy for Nanofiltration in Water Treatment

Modification of microfiltration membranes by alkoxysilane polycondensation induced quaternary ammonium compounds grafting for biofouling mitigation

Mitigation Of Membrane Fouling Using An Electroactive Polyether Sulfone Membrane

Improved Ultrafiltration Performance Through Dielectric Barrier Discharge/sulfite Pretreatment: Effects of Water Matrices and Mechanistic Insights

Surface functionalization via synergistic grafting of surface-modified silica nanoparticles and layered double hydroxide nanosheets for fabrication of superhydrophilic but relatively oleophobic antifouling membranes

Application of Ultra-Low Concentrations of Moderately-Hydrophobic Chitosan for Ultrafiltration Membrane Fouling Mitigation

Surface Modification of Poly(vinylidene fluoride) Ultrafiltration Membranes with Chitosan for Anti-Fouling and Antibacterial Performance

Facile Grafting of Zwitterions Onto the Membrane Surface to Enhance Antifouling Properties for Wastewater Reuse

Effects of a dual functional filler, polyethersulfone-g-carboxymethyl chitosan@MWCNT, for enhanced antifouling and penetration performance of PES composite membranes

Surface Functionalization of Reverse Osmosis Membranes with Sulfonic Groups for Simultaneous Mitigation of Silica Scaling and Organic Fouling

Coagulation/co-catalytic membrane integrated system for fouling-resistant and efficient water purification

High-performance Thin-Film Composite Membranes with Surface Functionalization by Organic Phosphonic Acids

Fouling Deposition As an Effective Approach for Preparing Monovalent Selective Membranes

Alleviating Membrane Fouling of Modified Polysulfone Membrane Via Coagulation Pretreatment/ultrafiltration Hybrid Process

An Antifouling Catechol/chitosan-Modified Polyvinylidene Fluoride Membrane for Sustainable Oil-in-water Emulsions Separation

Anti-Foulant Ultrafiltration Polymer Composite Membranes Incorporated with Composite Activated Carbon/Chitosan and Activated Carbon/Thiolated Chitosan with Enhanced Hydrophilicity

Assembly of Self-Cleaning Perfluoroalkyl Coating on Separation Membrane Surface

Sustainable Fabrication of Zwitterionic Nanofiltration Membranes with Enhanced Antifouling Performance Using Sugar

Sustainable fabrication of chitosan membranes with optimized performance for ultrafiltration