Abstract:Multimode electric propulsion system is widely used in deep space exploration. Its thrust is output in stages with the change of input power, which also means that continuous power changes lead to discontinuous thrust changes. In the design and optimization of low-thrust trajectory, the discontinuity of thrust is often neglected and regarded as a continuous parameter. The optimal design of low-thrust transfer trajectory constrained by multimode electric propulsion is studied, and the influence of thrust grading characteristics on the trajectory is analyzed in this paper. A specific optimization strategy is proposed, including three main steps: model discretization based on direct method, fast generation of initial value based on particle swarm optimization (PSO), and optimization based on sequential quadratic programming (SQP). The dynamic model and optimization model of low-thrust transfer trajectory is established. Then, the optimization model is discretized based on the direct method and the original optimal control problem is transformed into a parameter optimization problem in the form of nonlinear programming (NLP). A hybrid optimization algorithm based on PSO and SQP is proposed to solve the new NLP problem. PSO is used to search the initial value efficiently and guarantee the global performance of the initial value and SQP is used for local optimization based on initial value, which can give full play to the excellent global optimization performance of PSO and the outstanding local optimization performance of SQP. The effectiveness of the proposed optimization strategy is verified by a simulation example of the main belt asteroid Metis (1974 QU2) rendezvous mission with once Mars gravity assist. The results show that the optimal control curve obtained is in accordance with the optimal control form of bang-bang control derived from the theory, and the thruster has just two situations at any time: shutdown or startup with maximum thrust. In the working power range, increasing the number of thrust stages can improve the rate of energy utilization, thereby improving the efficiency of thruster, shortening the startup time and reducing fuel consumption. Meanwhile, ineffective grading should be avoided in the non-working power range.

Planning Allocation for GTO-GEO Transfer Spacecraft with Triple Orthogonal Gimbaled Thruster Boom

Optimal thrust allocation based GA for dynamic positioning ship

Orbit Maneuver for GEO On-Orbit Service Satellite Using Hohmann Transfer

Time-shared scheme design for attitude control system during space separation

Constant-Thrust Orbital Transfer about Binary Asteroids Using Bilinear Tangent Guidance

Control Allocation Strategy for Large Angle Maneuver and High Precision Stability Control of Agile Small Satellite

Automated Orbital Transfer and Hovering Control Using Artificial Potential

Hybrid Actuator Control Torque Allocation Algorithm for Rapid Maneuver Satellite

Research on a Thrust Allocation Algorithm of Spacecraft in RVD

Design and Optimization of Low Thrust Transfer Trajectory for Engineering Constraints

Gimbal Actuator Modeling for a Spin-Stabilized Spacecraft Equipped with a 1DoF Gimbaled-Thruster and two Reaction Wheels

The Dynamic Model of the High-Thrust Orbital Maneuvering Engine with Storable Propellant

Earth Shadow Time/Accelerometer/GNSS-Based Geosynchronous Transfer Orbit Determination Method for Electric Propulsion Satellite

Thrust Vector Control for Powered Flight of the Upper Stages

Trajectory Optimization Method for Spacecraft Orbit Transfer with Finite Thrust

Optimum Design of a Reusable Spacecraft Launch System Using Electromagnetic Energy: An Artificial Intelligence GSO Algorithm

Optimization of Spacecraft Thruster Management Function

The Angular Momentum Unloading of the Asymmetric GEO Satellite by Using Electric Propulsion with a Mechanical Arm

On-line Orbit Planning and Guidance for Advanced Upper Stage

RBCC Constant Dynamic Pressure Booster Trajectory Design and Propellant Mass Flowrate Analysis for TSTO Transportation System

A Control Allocation Approach for Hybrid Actuators