Abstract:" Poly-benzoxazine resin (PBR) with a unique N, O six-membered heterocyclic structure, had a potential application in the field of aerospace due to its low expansion coefficient, high weather resistance, high carbon yield, good mechanical strength, and excellent ablation resistance［1］. In this work, PBR was incorporated into nitrile rubber (NBR) to obtain PBR/NBR composites, and the ablation resistance and thermal insulation of the PBR/NBR composites were investigated. The formulation of rubber compounds was NBR 100 phr (mass, the same below), 4010 NA 2.0 phr, zinc oxide 2.0 phr, SA 2.4 phr, CZ 2.2 phr, sulfur 1 phr and PBR varies. And the samples were named as P X/NBR, where X stood for the amount of PBR. As shown in Fig 1(a), with the increasing amount of PBR, the linear ablation rate and thermal conductivity of PBR/NBR nanocomposites decreased. The linear ablation rate and thermal conductivity of PBR/NBR nanocomposites with 60 phr PBR arrived at 0.023 mm/s and 0.169 W/(m·K), respectively, suggesting PBR was a thermally stable and char-producing polymeric material［2］. Compared to NBR [as shown in Fig 1(b)], a relatively dense char layer was found on the surface of PBR/NBR [as shown in Fig 1(c)], indicating that the formation of more dense char layer on the ablated surface had significant ablation resistance. Char retention on the substrate surface after being subjected to high impact force of oxy-acetylene flame further validated the strong interaction between char and substrate as well as the resin network formation throughout the NBR matrix, thereby effectively preventing the intrusion of external heat flow during the ablation period and avoiding high heat transfer to the internal structure and reducing the ablation rate［3］. Moreover, the non-flammability gas induced by the degradation of the benzoxazine resin tended to reduce the concentration of the O2 and the temperature of the surface［4］. The new ablation and thermal resistant materials had potential applications in aerospace fields."

High Ablation-Resistant Silicone Rubber Composites Via Nanoscale Phenolic Resin Dispersion

Enhanced flexibility and ablative performance of silicone rubber by constructing an interpenetrating zirconium-containing polysiloxane double network

Significantly improved ablation properties under high heat flux environment based on carbon fiber reinforced Zr-doped silicone rubber

Ordered graphitized ceramic layer induced by liquid crystal epoxy resin in silicone rubber composites with enhanced ablation resistance performance

Mesophase pitch modified silicone rubber coatings with fence-like ceramic layer structures and excellent ablation resistance performance

Improving ablation properties of liquid silicone rubber composites by in situ construction of rich‐porous char layer

Comparison of the ablative performance of silicone rubber‐based composites by analyzing a large number of samples

Effects of Zirconium Silicide on the Vulcanization, Mechanical and Ablation Resistance Properties of Ceramifiable Silicone Rubber Composites

The preparation of rigid hybrid silicone resins by combining carbon nanomaterial loading nanoparticles

Characterization of Nanocomposites Based on Silicone Rubber by Ultrashort Pulse Laser Ablation

Improving high heat flux ablation resistance of silicone rubber composites by laying low-areal-density carbon fiber fabrics

Efficient fabrication of flame-retarding silicone rubber/hydroxylated boron nitride nanocomposites based on volumetric extensional rheology

Dual network of poly-benzoxazine/nitrile rubber composite and its ablation resistance and thermal insulation properties

Ablation properties of zinc borate and aluminum hypophosphite filled silicone rubber composites

Epoxidized vinyl silicone rubber-based flexible ablative material with low linear ablation rate

Understanding the Role of Carbon Fiber Skeletons in Silicone Rubber-Based Ablative Composites

Performance Enhancement of Silicone Rubber Using Superhydrophobic Silica Aerogel with Robust Nanonetwork Structure and Outstanding Interfacial Effect

Silicone-grafted epoxy/carbon fiber composites with superior mechanical/ablation performance

Development of silicone rubber-based nanocomposites: nanoparticle selection and performance analysis

In situ construction of fiber‐supported micro‐porous char structure to enhance anti‐ablative performance of silicone rubber composites

Enhanced ablation resistance of phenolic composites through the construction of a sea-island nanostructured char layer via in-situ catalytic graphitization of incorporated Salen-Ni complex