Abstract:The laser‐processed, heat‐treated 3D copper current collector (LHC600) exhibits selective lithiophilic properties due to the high Cu (100) orientation inside structures. The assembled half‐cell shows 97.42% Coulombic efficiency after 350 cycles at a current density of 1 mA cm−2 and a capacity of 1 mAh cm−2. Paired with lithium iron phosphate, the full cell maintains 92.39% capacity after 400 cycles at 1C rate. The practical application of lithium (Li) metal anodes in high‐capacity batteries is impeded by the formation of hazardous Li dendrites. To address this challenge, this research presents a novel methodology that combines laser ablation and heat treatment to precisely induce controlled grain growth within laser‐structured grooves on copper (Cu) current collectors. Specifically, this approach enhances the prevalence of Cu (100) facets within the grooves, effectively lowering the overpotential for Li nucleation and promoting preferential Li deposition. Unlike approaches that modify the entire surface of collectors, our work focuses on selectively enhancing lithiophilicity within the grooves to mitigate the formation of Li dendrites and exhibit exceptional performance metrics. The half‐cell with these collectors maintains a remarkable Coulombic efficiency of 97.42% over 350 cycles at 1 mA cm−2. The symmetric cell can cycle stably for 1600 h at 0.5 mA cm−2. Furthermore, when integrated with LiFePO4 cathodes, the full‐cell configuration demonstrates outstanding capacity retention of 92.39% after 400 cycles at a 1C discharge rate. This study introduces a novel technique for fabricating selective lithiophilic three‐dimensional (3D) Cu current collectors, thereby enhancing the performance of Li metal batteries. The insights gained from this approach hold promise for enhancing the performance of all laser‐processed 3D Cu current collectors by enabling precise lithiophilic modifications within complex structures.

Computational Insights into the Crystal Facet Selectivity of Cu Current Collector for the Growth of Lithium Metal

Enabling Isotropic Li Growth Via Li Foil Facet-Engineering for High-Performance Li Metal Batteries

The Dependence of Solid Electrolyte Interphase on the Crystal Facet of Current Collector in Li Metal Battery

Facile Electroless Plating Method to Fabricate a Nickel-Phosphorus-Modified Copper Current Collector for a Lean Lithium-Metal Anode.

An Interconnected Silver Coated Carbon Cloth Framework As a Host to Reduce Lithium Nucleation Over-Potential for Dendrite-Free Lithium Metal Anodes

Crystal Orientation Dependence of Precipitate Structure of Electrodeposited Li Metal on Cu Current Collectors

Crystal facet correlated Zn growth on Cu for aqueous Zn metal batteries

Gradient Three-Dimensional Current Collector with Lithiophilic Nanolayer Regulation for Efficient Lithium Metal Anode Construction.

Laser‐Constructing 3D Copper Current Collector with Crystalline Orientation Selectivity for Stable Lithium Metal Batteries

Lithiophilic Cu-CuO-Ni Hybrid Structure: Advanced Current Collectors Toward Stable Lithium Metal Anodes.

Growing Cuprite Nanoparticles on Copper Current Collector Toward Uniform Li Deposition for Anode-Free Lithium Batteries

Straining Copper Foils to Regulate the Nucleation of Lithium for Stable Lithium Metal Anode

Li2ZnCu3 modified Cu current collector to regulate Li deposition

Synergistic Effect of 3D Current Collectors and ALD Surface Modification for High Coulombic Efficiency Lithium Metal Anodes

Lithium Induced Nano‐Sized Copper with Exposed Lithiophilic Surfaces to Achieve Dense Lithium Deposition for Lithium Metal Anode

The mechanism of Li deposition on the Cu substrates in the anode-free Li metal batteries

A Corrosion-Resistant Current Collector for Lithium Metal Anodes

Super-three-dimensional Lithiophilic Cu-based Current Collector for Anode-free Lithium Metal Battery

Lithiophilic Sn sites on 3D Cu current collector induced uniform lithium plating/stripping

Lithiophilic 3D Porous CuZn Current Collector for Stable Lithium Metal Batteries

Promoting Homogeneous Lithium Deposition by Facet-Specific Absorption of CoIn3 for Dendrite-Free Lithium Metal Anodes