Abstract:The communication quality between an RFID tag and a reader in a RFID network, especially the parameters of the passive tag antenna such as reading range, directivity and return loss, is affected by several factors from the environment. For practical RFID application, since the environment is complex and volatile, these factors include metallic surface of products, absorptions and impacts from neighbor tag antennas like scattering and mutual coupling. In this paper, it consists of the analysis of impacts caused by these factors and the design of passive tag antennas with resonant frequency 915 MHz able to be used in practical RFID applications against those impacts. Comparing with former ones, the proposed antenna reduces the size of the tag antenna to approximately commercial standard (18 mm x 48 mm x 3 mm) by using certain structures applied in the unit cell of metamaterial or HIS, while the properties including directivity, return loss and input impedance are still appropriate for RFID applications. Simulation results from HFSS indicates that at 915 MHz, the return loss can be about 21 dB, as most of the power can be radiated into the space towards the receiver. Meanwhile, the input impedance Z(0) = 9.4738 + j143.9189 Omega, perfectly matching the impedance of the RFID chip placed on the top surface of the antenna. The above improved parameters play an important role in prolonging the reading range.

A Reflection-Amplifier-Based Long-Range Semi-Passive UHF RFID Tag with Standard Compatibility

Signal Descriptions and Formulations for Long Range Uhf Rfid Readers

Design of UHF Semi-active Tag Antenna

UHF-RFID Tag Chip Integrated Reader Antenna Array

Dual-Dipole Uhf Rfid Tag Antenna with Quasi-Isotropic Patterns Based on Four-Axis Reflection Symmetry

Design and Implementation of a High Sensitivity Fully Integrated Passive UHF RFID Tag

Design of Compact Passive Tag Antenna for Practical Rfid Applications

High Gain and High Efficiency UHF Tag with Enhanced Complementary Spilt Ring Resonator Metamaterials

Analysis and Design of Power Efficient Semi-Passive Rfid Tag

An RF Interface for Ultra High Frequency Passive RFID Tag

A Fully Integrated 2.45G Semi-Active RFID Tag IC

Design and Implementation of an Analog Front-End Circuit for Semi-Passive Hf Rfid Tag

Design And Implementation Of A Passive Uhf Rfid Tag With A Temperature And Process Compensation Oscillator

A High Sensitivity Analog Front-End Circuit for Semi-Passive Hf Rfid Tag Applied to Implantable Devices

Compact Single-Layer RFID Tag Antenna Tolerant to Background Materials

A UHF RFID System with On-Chip-antenna Tag for Short Range Communication

A Novel Power Amplifier Structure for RFID Tag Applications

A Compact UHF-RFID Tag Antenna With Embedded AMC for Metallic Objects

Proximity Coupled Cavity Backed Patch Antenna for Long Range UHF RFID Tag

UHF Near-Field Tags Design Based on Split Ring Resonator