Abstract:Dual mobile manipulators are increasingly used in cooperative operation tasks, and their appropriate joint configurations are the premise to ensure the success of the tasks. However, for a given task path, due to the existence of redundant degrees of freedom, there are countless possible joint configurations, which makes it difficult to solve the inverse kinematics. In addition, most of the existing redundant inverse kinematics solutions are only for redundant manipulators or single mobile manipulator, with less consideration given to the impact of the constraints between the dual mobile manipulators on the solution performance. To this end, a new inverse kinematics solution method for the dual mobile manipulators is proposed in the paper. First, six parameters are introduced to describe the kinematic redundancy, so as to transform the inverse kinematics of the dual mobile manipulators into non-redundant inverse kinematics. Then, in order to make full use of the redundancy, the weighted product form of the normalized ideal redundant behaviors including manipulability, joint motion continuity, collision avoidance, obstacle avoidance and joint motion synchronization is considered as an objective function. Finally, the redundancy parameters are optimized by the Nelder-Mead simplex method to obtain the desired joint configurations. Based on the platform composed of SUMMIT-XL STEEL mobile robot and UR5 manipulator, a single target pose solution is simulated. Moreover, using the platform composed of SUMMIT-XL STEEL mobile robot and AUBO-i16 manipulator, the performance of path solution and obstacle avoidance is evaluated experimentally. The simulation and experimental results show that under the constraints of the desired redundant behaviors, satisfactory joint configurations can be acquired in the reachable space of the joints. Besides, the joint configurations of the dual mobile manipulators are solved in about 1 ms. It follows that the proposed method can select the optimized one from multiple possible joint configurations by the redundancy parameters optimization.

Global Redundancy Optimization of Manipulability for 7-Dofs Anthropomorphic Manipulator Using Joint Monotonicity

A Joint Physical Constraints Avoidance Method for Inverse Kinematics Problem of Redundant Humanoid Manipulator

A Unified Weighted Least Norm Method For Redundant Manipulator Control

Adaptive Robust Posture Control of A Pneumatic Muscles Driven Parallel Manipulator with Redundancy

Kinematics Optimization of a Novel 7-DOF Redundant Manipulator.

Manipulability Optimization of Redundant Manipulators Using Dynamic Neural Networks.

Kinematic and Dynamic Models of Hyper-Redundant Manipulator Based on Link Eigenvectors

The Optimization of Global Fault Tolerant Trajectory for Redundant Manipulator Based on Self-Motion

Analytical Inverse Kinematic Computation for Anthropomorphic Manipulator Based on Human-Like Motion Optimization and Maximum Reachable Region Optimization.

Prioritized Multitask Flow Optimization of Redundant Hydraulic Manipulator

Inverse Kinematics Solution Based on Redundancy Modeling and Desired Behaviors Optimization for Dual Mobile Manipulators.

Dynamic Manipulability and Optimization of a Redundant Three DOF Planar Parallel Manipulator

Kinematic Optimization of Redundant Manipulators to Improve the Fault-Tolerant Control

Kinematic and dynamic optimizations of the redundant manipulator via local degrees of freedom

Manipulability and Robustness Optimization of the Cable-Driven Redundant Soft Manipulator

Manipulability Optimization of Redundant Manipulators Using Reinforcement Learning

An Algorithm of Inverse Kinematics for Manipulator with Redundancy

AN OPTIMIZATION METHOD FOR INVERSE KINEMATICS OF A 7-DOF REDUNDANT MANIPULATOR

Dynamics and Control of a Novel 3 -DOF Parallel Manipulator with Actuation Redundancy.

Inverse Kinematics and Control of a 7-DOF Redundant Manipulator Based on the Closed-Loop Algorithm

Optimization of the Joint Torque in A Flexible Redundant Manipulator