Abstract:Flexible pressure sensors have attracted intense attention because of their widespread applications in electronic skin, human–machine interfaces, and healthcare monitoring. Conductive porous structures are always utilized as active layers to improve the sensor sensitivities. However, flexible pressure sensors derived from traditional foaming techniques have limited structure designability. Besides, random pore distribution causes difference in structure and signal repeatability between different samples even in one batch, therefore limiting the batch production capabilities. Herein, we introduce a structure designable lattice structure pressure sensor (LPS) produced by bottom-up digital light processing (DLP) 3D printing technique, which is capable of efficiently producing 55 high fidelity lattice structure models in 30 min. The LPS shows high sensitivity (1.02 kPa<sup>–1</sup>) with superior linearity over a wide pressure range (0.7 Pa to 160 kPa). By adjusting the design parameters such as lattice type and layer thickness, the electrical sensitivities and mechanical properties of LPS can be accurately controlled. In addition, the LPS endures up to 60000 compression cycles (at 10 kPa) without any obvious electrical signal degradation. This benefits from the firm carbon nanotubes (CNTs) coating derived from high-energy ultrasonic probe and the subsequent thermal curing process of UV-heat dual-curing photocurable resin. For practical applications, the LPS is used for real time pulse monitoring, voice recognition and Morse code communication. Furthermore, the LPS is also integrated to make a flexible 4 × 4 sensor arrays for detecting spatial pressure distribution and a flexible insole for foot pressure monitoring.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c21407?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c21407</a>.Comparison of additive manufacturing techniques for preparation of porous materials for flexible electronics; optical photographs of the lattice structure green model after DLP 3D printing and after CNT coating; SEM images of bare TPU substrate and CNT-coated sample; cross-section SEM image of CNT-coated sample; tensile stress-strain curves of 3D printed pure TPU compared to PDMS and Ecoflex 00-10; optical and SEM images of conductive fabric interdigital electrode; optical photograph of LPS under a compression and release cycle at a compression rate of 0.1 mm/s; optical images of the LPSs with three lattice types ("A", "D" and "E") at various applied pressure; compressive stress–strain curves of LPSs with 5 types of lattice structure; cyclic compression test under 40 kPa at different frequencies; SEM images of LPS sample after 60 000 cycles compression test at 10 kPa with a frequency of 0.5 Hz; current response of LPS attached on the throat when saying "Printing" and "What's up"; SEM images of the surface morphology of papers with different roughness (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c21407/suppl_file/am0c21407_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Batch Fabrication of Flexible Paper-Based Pressure Sensors Via Thermoplastic Self-Packaging.

Highly Sensitive Pressure Sensors Based on Conducting Polymer-Coated Paper

Friction for Flexible Pressure Sensors and Arrays on Polymers

Flexible Pressure Sensor with Micro-Structure Arrays Based on PDMS and PEDOT:PSS/PUD&CNTs Composite Film with 3D Printing

Batch Fabrication of Paper-Based Waterproof Flexible Pressure Sensors Enabled by Roll-to-Roll Lamination

All Paper-Based Flexible and Wearable Piezoresistive Pressure Sensor

A Flexible Capacitive Paper-Based Pressure Sensor Fabricated Using 3D Printing

Rapid Prototyping Flexible Capacitive Pressure Sensors Based on Porous Electrodes

Highly Flexible and Sensitive Pressure Sensor: Fabrication of Porous PDMS/Graphene Composite via Laser Thermoforming

Batch fabrication of ultrathin flexible pressure sensors enabled by full printed technique

Large‐Area Fabrication of High‐Performance Flexible and Wearable Pressure Sensors

Pressure‐Temperature Dual‐Parameter Flexible Sensors Based on Conformal Printing of Conducting Polymer PEDOT:PSS on Microstructured Substrate

High-Performance Flexible Piezoresistive Pressure Sensor Printed with 3D Microstructures

Ultralow-Cost, Highly Sensitive, and Flexible Pressure Sensors Based on Carbon Black and Airlaid Paper for Wearable Electronics

Facile Fabrication of Flexible Pressure Sensor with Programmable Lattice Structure

A Flexible Resistive Pressure Sensor Based On Thermally Expandable Microspheres

Molding-Free Fully-Printed Flexible Tactile Sensors with Performance- Enhancing Microstructures

A flexible pressure sensor based on PEDOT coated polyester nonwoven fabric for low-pressure range

Anodized Aluminum Oxide-Assisted Low-Cost Flexible Capacitive Pressure Sensors Based on Double-Sided Nanopillars by a Facile Fabrication Method

Vacuum Filtration-Coated Silver Electrodes Coupled with Stacked Conductive Multi-Walled Carbon Nanotubes/Mulberry Paper Sensing Layers for a Highly Sensitive and Wide-Range Flexible Pressure Sensor

Flexible and Highly Sensitive Pressure Sensors with Surface Discrete Microdomes Made from Self-Assembled Polymer Microspheres Array