Abstract:In aeroengine, an s-shaped annular duct is used to connect the high pressure compressor spool to the upstream low pressure compressor. The intermediate casing duct is required because the compressors are designed with different mean radii. Shortening the length of intermediate casing duct is of important significance for improving the performance of aeroengines. Meanwhile, the struts guiding the flow are installed in the intermediate duct, the inlet flow of the duct is not even, and outlet flow requires sufficient uniformity to ensure good working conditions for the high pressure compressor. So the design and optimization of flow path of intermediate casing duct including struts have very important practical significance.This study builds up a system of numerical optimization 3D model based on genetic algorithm and Kriging agent model on the Matlab platform, which automatically couples pre-processing, solver and post-processing of Numeca CFD software. This tool optimizes the intermediate casing duct including struts and a best flow path profile is obtained under the given constrained conditions.The optimization method is validated through experimental investigation. Four kinds of intermediate casing ducts are test, including the original model, optimization model, as well as two models based on optimization model, respectively. The chord of the struts and the length of flow path are changed for the last two models. The internal flow characteristics and aerodynamic performance of four cases above are measured, and the effects of the geometry structure of flow paths and struts to the aerodynamic performance of the ducts are evaluated, and the results may bring some modifications to the optimization method to make it more perfect. Through the experimental and numerical study, two key factors affecting the design of intermediate duct are brought about, which is the midway offset. ratio and the maximum to the minimum area ratio of flow path along streamwise including struts. For the given intermediate. casing duct in this study, the midway offset ratio is about 0.41, and the maximum to the minimum area ratio of flow path along streamwise including struts should be small.

Application of Adaptive Kriging Approximation Model in Two Dimensional Diffuser Aerodynamic Optimization Design

Aerodynamic Design Optimization by Using a Continuous Adjoint Method

Sensitivity-Based Parameterization for Aerodynamic Shape Global Optimization

Particle Swarm Optimization of Aerodynamic Shapes with Nonuniform Shape Parameter–Based Radial Basis Function

Gradient-Based Response Surface Approximations for Design Optimization

Aerodynamic Optimization Design for Airfoil Based on Kriging Model

Aerodynamic Optimization Design of Airfoils Based on Adaptive Kriging Surrogate Model

Aerodynamic Optimization for Low Pressure Turbine Exhaust Hood Using Kriging Surrogate Model

Application of Kriging Surrogate Model for Aerodynamic Shape Optimization of Wing

Aerodynamic Optimization Design of Turbomachinery with Approximation Model Method

Aerodynamic Optimization Design of Centrifugal Compressor'S Impeller with Kriging Model

Application of the Improved EGO Algorithm in Transonic Airfoil Aerodynamic Optimization Design

Gradient-based Kriging Approximate Model and Its Application Research to Optimization Design

Aerodynamic shape optimization using design-variables-screening method

Multi-Objective Aerodynamic Optimization of Gas Turbine Exhaust Diffuser: Experimental and Numerical Validations

Automated Design Optimization And Experimental Validation For Intermediate Casing Duct Of Aeroengine

Aerodynamic Optimization Method Based on Adaptive Surrogate Model

An Improved Hybrid Adjoint Method in External Aerodynamics Using Variational Technique for the Boundary Integral Based Optimal Objective Function Gradient

Automated shape optimisation of a plane asymmetric diffuser using combined Computational Fluid Dynamic simulations and multi-objective Bayesian methodology

Multi-objective Optimization of a 3D Vaneless Diffuser Based on Fuzzy Theory

Turbine Discs Optimization Design Based on Kriging Model