Abstract:In order to investigate the accuracy and applicability of steel equivalent constitutive model, the calculated results were compared with typical tests of steel frames under static and dynamic loading patterns firstly. Secondly, four widely used models for time history analysis of steel frames were compared to discuss the applicability and efficiency of different methods, including shell element model, multi-scale model, equivalent constitutive model (ECM) and traditional beam element model (especially bilinear model). Four-story steel frame models of above-mentioned finite element methods were established. The structural deformation, failure modes and the computational efficiency of different models were compared. Finally, the equivalent constitutive model was applied in seismic incremental dynamic analysis of a ten-floor steel frame and compared with the cyclic hardening model without considering damage and degradation. Meanwhile, the effects of damage and degradation on the seismic performance of steel frame were discussed in depth. The analysis results showed that: damages would lead to larger deformations. Therefore, when the calculated results of steel structures subjected to rare earthquake without considering damage were close to the collapse limit, the actual story drift of structure might already exceed the limit, leading to a certain security risk. ECM could simulate the damage and degradation behaviors of steel structures more accurately, and improve the calculation accuracy of traditional beam element model with acceptable computational efficiency.

A Method for Increasing the Integral Seismic Capacity of Tall Steel Buildings Based on Uniform-Damage Seismic Design

Seismic Failure Mode Control of Tall Steel Buildings by Changing the Failure Path

Seismic Optimization Design for Uniform Damage of Reinforced Concrete Moment-Resisting Frames Using Consecutive Modal Pushover Analysis

Finite Element Analysis of the Seismic Properties of Two-Tower High-Rise Steel Structures

"SYSTEM CAPACITY DESIGN METHOD" FOR THE SEISMIC DESIGN OF BUILDING STRUCTURES: A REVIEW

Seismic Design Methodology Based on Damage Mechanism Control for Reinforced Concrete Structures

Modeling on Collapse Behaviour of High-Rise Concrete-Filled Steel Composite Frames under Over-Design Seismic Excitations

Cumulative Component Damages on Collapse Capacity of Ductile Steel and CFT Moment Resisting Frames under Over-design Ground Motions

SEISMIC COLLAPSE RESISTANCE EVALUATION OF ONE SUPER-TALL BUILDING WITH DIFFERENT LATERAL FORCE RESISTING SYSTEMS

Seismic damage performance design of reinforced concrete structures based on improved capacity spectrum method

Quantitative investigation on collapse margin of steel high-rise buildings subjected to extremely severe earthquakes

Application of Steel Equivalent Constitutive Model for Predicting Seismic Behavior of Steel Frame

Weak Story Strengthening and Weakest Failure Mode Control of Tall Steel Frame Buildings

Thin-Walled Cfst Columns for Enhancing Seismic Collapse Performance of High-Rise Steel Frames

Seismic Performance Analysis of High-rise Steel-concrete Composite Structures under Earthquake Action Based on Sound-Vibration Method

Influence of Damage and Degradation Index on Steel Frame under Severe Earthquakes

Collapse-based seismic design method

Failure mode analysis of super-tall huge steel frame structure

STUDY ON THE COLLAPSE-RESISTANT CAPACITY OF RC FRAMES WITH DIFFERENT SEISMIC FORTIFICATION LEVELS

A Comparative Test Study on the Seismic Damage Sustained by Frame-Core Tube Structures

Integral Seismic Deformation Method: A Pseudo-static Method for Seismic Design of Underground Structures