The Latest Advances in Raman Fiber Laser

LI Jia-fang

2006-01-01

Abstract:In this article,the latest advances in cascaded Raman fiber lasers,tunable multi-wavelenth Raman fiber lasers and so on are reported.Several important Raman fiber lasers are analyzed in detail.They are widely applied in communication and laser technology.

What problem does this paper attempt to address?

Research Advances in Ultrafast Raman Fiber Lasers

Pan Weiwei,Zhou Jiaqi,Zhang Lei,Feng Yan

DOI: https://doi.org/10.3788/cjl201946.0508016

2019-01-01

Abstract:Mode-locking and ultrashort pulse synchronous pumping arc the main ways to obtain ultrashort pulses from Raman fiber lasers. In the mode-locked Raman fiber lasers, high performance output can be achieved in the structure with equivalent saturable absorbers, but the limitation caused by the long gain fiber remains. The method of synchronous pumping can overcome this problem effectively and achieve excellent ultrafast Raman laser output. There is a great potential for the ultrafast Raman fiber laser technology, and future research will focus on further improving the overall performance of various ultrafast Raman fiber lasers and investigating new phenomena observed in these laser systems.
Ultrafast Raman fiber laser: a review and prospect

Jiaqi Zhou,Weiwei Pan,Weiao Qi,Xinru Cao,Zhi Cheng,Yan Feng

DOI: https://doi.org/10.1186/s43074-022-00064-2

IF: 16.5

2022-01-01

PhotoniX

Abstract:Ultrafast Raman fiber laser has been proved to be an effective method to obtain ultrafast optical pulses at special wavelength. Yet, compared with conventional rare-earth doped counterparts, it is challenging for Raman fiber lasers to generate pulses with high pulse energy and short pulse duration. Here, we review three categories of ultrafast Raman fiber laser technologies and give detailed discussions on the advantages and challenges of each. In regards to mode-locking, different saturable-absorbers-based fiber lasers are compared and their common problem resulting from long cavity length are discussed. In terms of synchronously-pumping, several approaches to match the repetition rate of pulsed pump with the length of Raman fiber cavity are discussed, while the technical complexity of each method is analyzed. Moreover, the recently developed technology termed as nonlinear optical gain modulation (NOGM) is introduced, which turns out to be a simple and quality solution to generate high-energy femtosecond pulses with wavelength agility. Compared with the others, NOGM gathers various advantages including simple structure, long-term stability, high pulse energy and short pulse duration, which may effectively promote application expansion of ultrafast Raman fiber laser in the near future.
Advances in Random Fiber Lasers and Their Sensing Application

Hong Chen,Shaohua Gao,Mingjiang Zhang,Jianzhong Zhang,Lijun Qiao,Tao Wang,Fei Gao,Xinxin Hu,Shichuan Li,Yicheng Zhu

DOI: https://doi.org/10.3390/s20216122

IF: 3.9

2020-10-28

Sensors

Abstract:Compared with conventional laser, random laser (RL) has no resonant cavity, reducing the requirement of cavity design. In recent years, the random fiber laser (RFL), a novel kind of RL, has made great progress in theories and experiments. The RFL has a simpler structure, a more flexible design, and higher reliability. It has valuable applications for earth sciences, biological life sciences, and national defense security, due to these unique properties. This paper reviews the development of RFLs in the last decade, including their configurations based on various optical fibers and their output properties, especially the method of control. Moreover, we also introduce their applications in the optical fiber sensing system, which is a very important and practical orientation to study. Finally, this paper presents the prospects of RFLs.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Ultra-wide Wavelength Tuning of a Cascaded Raman Random Fiber Laser.

Lei Zhang,Huawei Jiang,Xuezong Yang,Weiwei Pan,Yan Feng

DOI: https://doi.org/10.1364/ol.41.000215

IF: 3.6

2016-01-01

Optics Letters

Abstract:An ultra-broadband tunable cascaded Raman random fiber laser pumped by a tunable (1020-1080 nm) ytterbium-doped fiber laser is investigated. By continuously adjusting the pump laser wavelength, the Raman random laser tunes accordingly due to the Raman gain competition. By increasing the pump power, up to the 5th order Raman random laser is achieved. As a result, 300 nm of continuous wavelength tuning from 1070 to 1370 nm is achieved by adjusting the pump wavelength and power altogether. The highest output power is 1.8 W at 1360 nm with an optical efficiency of 15% from 1080 nm. To the best of our knowledge, this is the widest wavelength tuning range reported for a random fiber laser so far. (C) 2016 Optical Society of America
Optical Microfiber-Based Ultrafast Fiber Lasers

Yuhang Li,Lizhen Wang,Linjun Li,Limin Tong

DOI: https://doi.org/10.1007/s00340-019-7303-z

2019-01-01

Applied Physics B

Abstract:Optical microfibers drawn from conventional fibers have attracted considerable interests and have found many novel applications. Here, we review recent advances in ultrafast fiber lasers based on optical microfibers. Starting with characteristics and fabrication of optical microfibers, which are closely related to ultrafast fiber lasers, we show that characteristics of large portion of evanescent field, tailorable dispersion, high optical nonlinearity, very low optical loss and full compatibility with conventional fibers are greatly beneficial to novel ultrafast fiber lasers. We then highlight recent works on ultrafast fiber lasers based on optical microfibers in terms of fast saturable absorbers made from optical microfiber-supported nanomaterials, dispersion management and high optical nonlinearity, as well as some other novel ultrafast fiber lasers. Finally, we briefly discuss future opportunities for optical microfiber-based ultrafast fiber lasers, such as high-order dispersion management, nonlinearity management and applications for sensing and measurement.
Advances in Fiber Laser Sources for Coherent Raman Scattering Microscopy

Zheng Shikai,Yang Kangwen,Ao Jianpeng,Ye Pengbo,Hao Qiang,Huang Kun,Ji Minbiao,Zeng Heping

DOI: https://doi.org/10.3788/cjl201946.0508008

2019-01-01

Abstract:Coherent Raman scattering is extensively used in various fields, such as biomedical tissue imaging and pharmacokinetics, because of its significant advantages, including non-invasive detection, label-free operation, and chemical specificity. Further, we introduce the implementation and characteristics of the fiber laser sources for coherent Raman scattering (CRS) microscopy, and review the most recent advances in improving the output power, tuning range, and spectral resolution based on the dual-color synchronized ultrashort pulses via supercontinuum generation, soliton self-frequency shift, and four-wave mixing. Additionally, the latest advances in four-wave-mixing-based fiber optical parametric oscillators arc introduced. Subsequently, the temporally synchronized, spatially overlapped, and wavelength-tunable dual-color ultrashort pulses arc obtained based on dispersion filtering and polarization manipulation using the polarization-maintaining fiber and the photonic crystal fiber. Furthermore, the generated laser pulses can be used to achieve non-invasive as well as label-free spectroscopic detection and microscopic imaging for lipids, proteins, and nucleic acid, which could provide an effective methodology to realize compact, user-friendly, and environmentally stable coherent Raman scattering imaging.
A High Efficiency Architecture for Cascaded Raman Fiber Lasers

V. R. Supradeepa,Jeffrey W. Nichsolson,Clifford E. Headley,Man F. Yan,Bera Palsdottir,Dan Jakobsen

DOI: https://doi.org/10.1364/OE.21.007148

2013-03-14

Abstract:We demonstrate a new high efficiency architecture for cascaded Raman fiber lasers based on a single pass cascaded amplifier configuration. Conversion is seeded at all intermediate Stokes wavelengths using a multi-wavelength seed source. A lower power Raman laser based on the conventional cascaded Raman resonator architecture provides a convenient seed source providing all the necessary wavelengths simultaneously. In this work we demonstrate a 1480nm laser pumped by an 1117nm Yb-doped fiber laser with maximum output power of 204W and conversion efficiency of 65% (quantum-limited efficiency is ~75%). We believe both the output power and conversion efficiency (relative to quantum-limited efficiency) are the highest reported for cascaded Raman fiber lasers.

Optics
An All-Fiber Multi-Wavelength Raman Laser Based On A Pcf Sagnac Loop Filter

Daru Chen,Shan Qin,Lingfang Shen,Hao Chi,Sailing He

DOI: https://doi.org/10.1002/mop.21968

IF: 1.311

2006-01-01

Microwave and Optical Technology Letters

Abstract:A Sagnac loop filter based on the birefringence of a photonic crystal fiber is used to demonstrate an all‐fiber multi‐wavelength Raman fiber laser. Stable lasing at multi‐wavelengths is achieved and the power distribution among different lasing wavelengths can be tuned by adjusting the pump powers. © 2006 Wiley Periodicals, Inc. Microwave Opt Technol Lett 48: 2416–2418, 2006; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.21968
Design of Raman-Parametric Fiber Amplifier for Wavelength Division Multiplex Transmission System

Xiaohong Jiang,Chun Jiang,Xiaoming Zhang

DOI: https://doi.org/10.3788/col20080605.0327

IF: 2.56

2008-01-01

Chinese Optics Letters

Abstract:We optimize the novel configuration of a hybrid fiber amplifier - Raman assisted-fiber-based optical parametric amplifier (R-FOPA),in which the parametric gain and Raman gain profiles are combined to achieve a flat composite gain profile. The pump powers and the fiber length in the hybrid amplifier are effectively optimized by genetic algorithm (GA) scheme. The optimization results indicate that the R-FOPA can achieve a 200-nm flat bandwidth spectrum with the gain of 20 dB and ripple of less than 4 dB.
Ultrafast Raman fiber Laser with Random Distributed Feedback

Weiwei Pan,Lei Zhang,Huawei Jiang,Xuezong Yang,Shuzhen Cui,Yan Feng

DOI: https://doi.org/10.1002/lpor.201700326

2018-01-01

LASER & PHOTONICS REVIEWS

Abstract:Ultrafast Raman fiber lasers are wavelength-agile light sources for various scientific and medical applications. Pulse pumping is an efficient way to generate a high power ultrafast Raman fiber laser, which however requires real-time synchronization between the pump pulses and laser cavity. A pulse pumped Raman fiber laser with random distributed feedback is investigated. Under repetitive pulse pumping, compound cavities based on distributed Rayleigh scattering are formed automatically to synchronize with the pump pulse train. In a proof of principle experiment, self-synchronization is observed and a stable picosecond pulsed random laser is generated at 1120 nm with an average power of 170 mW. Raman gain and random distributed feedback are spatially separated in the present pulse pumped laser configuration. This allows a direct characterization of the random distributed feedback and a comparison between random lasing and amplified spontaneous emission, which is not possible in previous continuous wave pumped random Raman fiber lasers.
Triple-clad-fiber-based kilowatt-level tunable Raman laser

Yang Zhang,Jiangming Xu,Junrui Liang,Sicheng Li,Jun Ye,Xiaoya Ma,Tianfu Yao,Zhiyong Pan,Liangjin Huang,Jinyong Leng,Pu Zhou

DOI: https://doi.org/10.1016/j.optlastec.2024.110654

IF: 4.939

2024-02-02

Optics & Laser Technology

Abstract:Raman fiber laser (RFL), due to its unique advantages of wide tuning range, free of photon darkening, and low quantum defect, is becoming an important kind of high power laser source. In this manuscript, we demonstrate a kilowatt-level wavelength tunable RFL. It employs a typical master oscillator power amplifier configuration. The seed laser is a homemade tunable random RFL. The Raman gain fiber is a section of triple-clad passive fiber. At an optimal Raman fiber length of 150 m based on numerical simulations, 1135.7 W Raman signal at 1124.3 nm can be achieved under pump power of 1543 W, corresponding to a power conversion efficiency of 71.8 %. Moreover, by tuning the wavelength of seed laser, kilowatt-level Raman signal continuously tunable from 1119.8 nm to 1137.2 nm is demonstrated. To the best of our knowledge, this is the first kilowatt-level wavelength tunable RFL ever reported.

optics,physics, applied
Strategic modal management for enhanced stimulated Raman scattering in optical fibers

Chenchen Fan,Yang Li,Xiulu Hao,Tianfu Yao,Jinyong Leng,Pu Zhou

DOI: https://doi.org/10.1364/oe.541999

IF: 3.8

2024-11-25

Optics Express

Abstract:Chenchen Fan, Yang Li, Xiulu Hao, Tianfu Yao, Jinyong Leng, Pu Zhou Raman fiber lasers have attracted significant attention for their unique ability to generate high-power output at specific wavelengths. ... [Opt. Express 32, 44186-44198 (2024)]

optics
Research Advances in Mode-Locked Fiber Lasers Based on Nonlinear Loop Mirror

Zhou Jiaqi,Pan Weiwei,Zhang Lei,Gu Xijia,Feng Yan

DOI: https://doi.org/10.3788/cjl201946.0508013

2019-01-01

Abstract:To improve the environmental stability and self-starting ability, researchers have developed the nonlinear optical-loop mirror and nonlinear amplifying-loop mirror (NALM) mode-locking technologies. The developing process of these technologies can be summarized as the following three phases: non-polarization-maintaining (PM) structures with polarization controllers, PM figure-of-8 cavity structures with dual-gain, and PM figure-of-9 cavity structures with a phase shifter. Among these, the newly invented figure-of-9 NALM mode-locked fiber laser is particularly advantageous owing to its easy self-starting ability, long-term stability, concise structure, and cost-effectiveness. Such a mode-locked fiber laser is increasingly employed in applications such as optical frequency combs, generation of THz radiation, and advanced material micromachining.
Transmission Performance Analysis of Fiber Optical Parametric Amplifiers for Wdm System

Xiaohong Jiang,Chun Jiang

DOI: https://doi.org/10.1155/2009/924340

2009-01-01

Advances in OptoElectronics

Abstract:A numerical analysis is presented on the long-haul wavelength-division multiplexing (WDM) transmission system employing fiber-optic parametric amplifier (FOPA) cascades based on one-pump FOPA model with Raman Effect taken into account. The end-to-end equalization scheme is applied to optimize the system features in terms of proper output powers and signal-to-noise ratios (SNRs) in all the channels. The numerical results show that—through adjusting the fiber spans along with the number of FOPAs as well as the channel powers at the terminals in a prescribed way—the transmission distance and system performance can be optimized. By comparing the results generated by different lengths of fiber span, we come to the optimal span length to achieve the best transmission performance. Furthermore, we make a comparison among the long-haul WDM transmission systems employing different inline amplifiers, namely, FOPA, erbium-doped fiber amplifier (EDFA), and Fiber Raman Amplifier (FRA). FOPA demonstrates its advantage over the other two in terms of system features.
Influence of Bragg Reflection of Chirped Tilted Fiber Bragg Grating on Raman Suppression in High-Power Tandem Pumping Fiber Amplifiers.

Xin Tian,Xiaofan Zhao,Meng Wang,Qihao Hu,Hongye Li,Binyu Rao,Hu Xiao,Zefeng Wang

DOI: https://doi.org/10.1364/oe.396250

IF: 3.8

2020-01-01

Optics Express

Abstract:The key remaining technological challenge to the realization of further power scaling for high-power fiber laser systems is overcoming the stimulated Raman scattering (SRS) effect. In past years, chirped and tilted fiber Bragg gratings (CTFBGs) have been demonstrated to be a simple and effective way to suppress SRS in high-power fiber amplifiers. However, the weak reflection at the Bragg wavelength could be strongly amplified, which not only limits the power and efficiency but also degrades the beam quality. We report here, for the first time to the best of our knowledge, the influence of the residual Bragg reflection of CTFBGs on SRS suppression in high-power fiber laser systems. Two groups of CTFBGs with different Bragg reflection wavelengths are fabricated and used for the comparison experiments. Test results show that the CTFBGs of longer Bragg wavelengths have a better suppression effect, in particular, at a higher power level. By further moving the Bragg wavelength of a CTFBG out of the Raman gain spectral range, a better suppression effect and a promotion in laser efficiency could be achieved, which is very useful for further power scaling.
Multiwavelength Raman fiber-ring laser based on tunable cascaded long-period fiber gratings

Young-Geun Han,Chang-Seok Kim,J.U. Kang,Un-Chul Paek,Y. Chung

DOI: https://doi.org/10.1109/lpt.2002.807923

IF: 2.6

2003-03-01

IEEE Photonics Technology Letters

Abstract:Multiwavelength Raman fiber lasers using intracavity tunable cascaded long-period fiber gratings (LPFGs) are discussed. The application of the cascaded LPFGs as a multichannel fiber filter for the multiple-wavelength generation is proposed and experimentally demonstrated. The characteristics of multiwavelength fiber-ring lasers can be controlled by changing the physical parameters of cascaded LPFGs such as the separation distance between the gratings, grating length, and number of gratings. The multiwavelength Raman fiber-ring laser with nine wavelength-division-multiplexing channels with 100-GHz spacing and 19 channels with 50-GHz spacing has been achieved by varying the physical parameters of cascaded LPFGs.

engineering, electrical & electronic,optics,physics, applied
Recent progress of fiber laser combining technology

LIU Yang,CHENG Yong,WANG Xiao-bing,SUN Bin,WANG Li-jun

DOI: https://doi.org/10.3969/j.issn.1007-5461.2007.03.002

2007-01-01

Abstract:The latest progress on fiber laser combining technology was presented,and the strongpoint and the shortcoming of the popular combining technology were analyzed.At last, the prospect and future development trend of fiber laser coherent combining technology were proposed.
High power, fixed and tunable wavelength, Grating-free Cascaded Raman fiber Lasers

V. Balaswamy,S. Arun,Santosh Aparanji,Vishal Choudhury,V.R. Supradeepa

DOI: https://doi.org/10.1364/OL.43.001574

2018-04-04

Abstract:Cascaded Raman lasers enable high powers at various wavelength bands inaccessible with conventional rare-earth doped lasers. The input and output wavelengths of conventional implementations are fixed by the constituent fiber gratings necessary for cascaded Raman conversion. We demonstrate here, a simple architecture for high power, fixed and wavelength tunable, grating-free, cascaded Raman conversion between different wavelength bands. The architecture is based on the recently proposed distributed feedback Raman lasers. Here, we implement a module which converts the Ytterbium band to the eye-safe 1.5micron region. We demonstrate pump-limited output powers of over 30W in fixed and continuously wavelength tunable configurations.

Optics
Modal Dynamics in Kilowatt Cladding-Pumped Random Distributed Feedback Raman Fiber Laser With Brightness Enhancement

Chenchen Fan,Yi An,Yang Li,Xiulu Hao,Tianfu Yao,Hu Xiao,Liangjin Huang,Jiangming Xu,Jingyong Leng,Pu Zhou

DOI: https://doi.org/10.1109/jlt.2022.3194534

IF: 4.7

2022-10-04

Journal of Lightwave Technology

Abstract:Chenchen Fan, Yi An, Yang Li, Xiulu Hao, Tianfu Yao, Hu Xiao, Liangjin Huang, Jiangming Xu, Jingyong Leng, Pu Zhou Random distributed-feedback Raman fiber lasers (RRFLs) are promising contenders in the applications of remote sensing, biotechnology, ... [J. Lightwave Technol. 40, 6486-6492 (2022)]

engineering, electrical & electronic,optics,telecommunications
Review of femtosecond laser direct writing fiber-optic structures based on refractive index modification and their applications

Jian Zhao,Yong Zhao,Yun Peng,Ri-qing Lv,Qiang Zhao

DOI: https://doi.org/10.1016/j.optlastec.2021.107473

2022-02-01

Abstract:Femtosecond (fs) laser pulses direct writing technology has been extensively employed to achieve microfabrication in various optical fibers for a broad range of applications. In this paper, the latest development of fiber-optic structures based on refractive index (RI) modification under fs-laser irradiation and their applications are reviewed. Firstly, the processing mechanism of fs-laser direct writing for optical fiber RI modification is described. And then, the fiber-optic structures including various fiber gratings and interferometers based on RI modification are summarized. It shows that the fs-laser direct writing technology has great advantages in the fabrication of various fiber structures with excellent properties. Furthermore, the applications of these RI-modified fiber-optic structures in sensors, lasers, birefringence adjustable elements, and couplers are also discussed. To conclude, the performances of RI-modified structures and their applications are presented and compared.

optics,physics, applied

The Latest Advances in Raman Fiber Laser

Research Advances in Ultrafast Raman Fiber Lasers

Ultrafast Raman fiber laser: a review and prospect

Advances in Random Fiber Lasers and Their Sensing Application

Ultra-wide Wavelength Tuning of a Cascaded Raman Random Fiber Laser.

Optical Microfiber-Based Ultrafast Fiber Lasers

Advances in Fiber Laser Sources for Coherent Raman Scattering Microscopy

A High Efficiency Architecture for Cascaded Raman Fiber Lasers

An All-Fiber Multi-Wavelength Raman Laser Based On A Pcf Sagnac Loop Filter

Design of Raman-Parametric Fiber Amplifier for Wavelength Division Multiplex Transmission System

Ultrafast Raman fiber Laser with Random Distributed Feedback

Triple-clad-fiber-based kilowatt-level tunable Raman laser

Strategic modal management for enhanced stimulated Raman scattering in optical fibers

Research Advances in Mode-Locked Fiber Lasers Based on Nonlinear Loop Mirror

Transmission Performance Analysis of Fiber Optical Parametric Amplifiers for Wdm System

Influence of Bragg Reflection of Chirped Tilted Fiber Bragg Grating on Raman Suppression in High-Power Tandem Pumping Fiber Amplifiers.

Multiwavelength Raman fiber-ring laser based on tunable cascaded long-period fiber gratings

Recent progress of fiber laser combining technology

High power, fixed and tunable wavelength, Grating-free Cascaded Raman fiber Lasers

Modal Dynamics in Kilowatt Cladding-Pumped Random Distributed Feedback Raman Fiber Laser With Brightness Enhancement

Review of femtosecond laser direct writing fiber-optic structures based on refractive index modification and their applications