MOTION PLANNING FOR PICK-AND-PLACE OPERATIONS OF A MULTI-JOINT ROBOTIC ARM

Bo Zhang

1992-01-01

ROBOT

Abstract:In this paper,we present a topology-based approach to deal with pick-and-place operations for a roboticarm.The planning method and its algorithm are discussed.The final experimental results are presented toshowy the feasibility of the approach.

What problem does this paper attempt to address?

Smooth Joint Motion Planning for Redundant Fiber Placement Manipulator Based on Improved RRT*

Qian Yang,Weiwei Qu,Yanzhe Wang,Xiaowen Song,Yingjie Guo,Yinglin Ke

DOI: https://doi.org/10.1016/j.rcim.2024.102851

IF: 10.103

2025-01-01

Robotics and Computer-Integrated Manufacturing

Abstract:In automated fiber placement (AFP), addressing the continuous motion planning challenge of redundant layup manipulators in complex environments, this paper proposes an offline redundancy optimization algorithm based on improved RRT* (Rapidly-exploring Random Trees). This algorithm maximizes the utilization of kinematic redundancy to derive smooth joint trajectories devoid of collisions and singularities. Firstly, the algorithm entails constructing a search map by eliminating joint configurations that violate constraints, and subsequently planning and optimizing the joint path by minimizing a multi-objective cost under the map constraint. Furthermore, several strategies are introduced to enhance RRT* for redundancy optimization. These strategies include a piecewise Gaussian sampling strategy (PGSS) to guide efficient tree growth within complex channels and enable joint sampling constrained by task coordinates. Additionally, the improved Steering and Local Optimization method are proposed to plan joint motion while considering intermediate task sequences. The effectiveness of the proposed algorithm is demonstrated in handling complex motion planning scenarios, such as layup involving complex path curves or dense obstacles. Experimental results validate the algorithm's capability to find feasible collision-free and singularity-free paths in relevant scenarios, provided such paths exist. Moreover, trajectory smoothness is optimized with increasing iterations.
A Topological Implementation for Motion Planning of a Robotic Arm

Li Yongcheng,Zhang Bo

DOI: https://doi.org/10.1007/bf02946580

IF: 1.871

1993-01-01

Journal of Computer Science and Technology

Abstract:An efficient path planning algorithm based on topologic method is presented in this paper. The collision free path planning for three-joint robotic arm consists of three parts: partition of C-space, construction of CN and search for a path in CN. We mainly solved the problems of partitioning the C-space and judging the connectivity between connected blocks, etc. For the motion planning of a robotic arm with a gripper, we developed the concepts of global planning and local planning, and discussed the basic factors for constructing the planning system. In the paper, some evaluation and analysis of the complexity and reliability of the algorithm are given, together with some ideas to improve the efficiency and increase the reliability. At last, some experimental results are presented to show the efficiency and accuracy of the algorithm.
Preparatory Manipulation Planning using Automatically Determined Single and Dual Arms

Weiwei Wan,Kensuke Harada,Fumio Kanehiro

DOI: https://doi.org/10.48550/arXiv.1812.03274

2018-12-08

Abstract:This paper presents a manipulation planning algorithm for robots to reorient objects. It automatically finds a sequence of robot motion that manipulates and prepares an object for specific tasks. Examples of the preparatory manipulation planning problems include reorienting an electric drill to cut holes, reorienting workpieces for assembly, and reorienting cargo for packing, etc. The proposed algorithm could plan single and dual arm manipulation sequences to solve the problems. The mechanism under the planner is a regrasp graph which encodes grasp configurations and object poses. The algorithms search the graph to find a sequence of robot motion to reorient objects. The planner is able to plan both single and dual arm manipulation. It could also automatically determine whether to use a single arm, dual arms, or their combinations to finish given tasks. The planner is examined by various humanoid robots like Nextage, HRP2Kai, HRP5P, etc., using both simulation and real-world experiments.

Robotics
Multi-Arm Trajectory Planning for Optimal Collision-Free Pick-and-Place Operations

Daniel Mateu-Gomez,Francisco José Martínez-Peral,Carlos Perez-Vidal

DOI: https://doi.org/10.3390/technologies12010012

2024-01-22

Technologies

Abstract:This article addresses the problem of automating a multi-arm pick-and-place robotic system. The objective is to optimize the execution time of a task simultaneously performed by multiple robots, sharing the same workspace, and determining the order of operations to be performed. Due to its ability to address decision-making problems of all kinds, the system is modeled under the mathematical framework of the Markov Decision Process (MDP). In this particular work, the model is adjusted to a deterministic, single-agent, and fully observable system, which allows for its comparison with other resolution methods such as graph search algorithms and Planning Domain Definition Language (PDDL). The proposed approach provides three advantages: it plans the trajectory to perform the task in minimum time; it considers how to avoid collisions between robots; and it automatically generates the robot code for any robot manufacturer and any initial objects’ positions in the workspace. The result meets the objectives and is a fast and robust system that can be safely employed in a production line.
Pick and Place Planning is Better than Pick Planning then Place Planning

Mohanraj Devendran Shanthi,Tucker Hermans

DOI: https://doi.org/10.1109/LRA.2024.3360892

2024-01-30

Abstract:Robotic pick and place stands at the heart of autonomous manipulation. When conducted in cluttered or complex environments robots must jointly reason about the selected grasp and desired placement locations to ensure success. While several works have examined this joint pick-and-place problem, none have fully leveraged recent learning-based approaches for multi-fingered grasp planning. We present a modular algorithm for joint pick and place planning that can make use of state of the art grasp classifiers for planning multi-fingered grasps for novel objects from partial view point clouds. We demonstrate our joint pick and place formulation with several costs associated with different placement tasks. Experiments on pick and place tasks with cluttered scenes using a physical robot show that our joint inference method is more successful than a sequential pick then place approach, while also achieving better placement configurations.

Robotics
Motion Planning for Aerial Pick-and-Place based on Geometric Feasibility Constraints

Huazi Cao,Jiahao Shen,Cunjia Liu,Bo Zhu,Shiyu Zhao

2023-06-08

Abstract:This paper studies the motion planning problem of the pick-and-place of an aerial manipulator that consists of a quadcopter flying base and a Delta arm. We propose a novel partially decoupled motion planning framework to solve this problem. Compared to the state-of-the-art approaches, the proposed one has two novel features. First, it does not suffer from increased computation in high-dimensional configuration spaces. That is because it calculates the trajectories of the quadcopter base and the end-effector separately in the Cartesian space based on proposed geometric feasibility constraints. The geometric feasibility constraints can ensure the resulting trajectories satisfy the aerial manipulator's geometry. Second, collision avoidance for the Delta arm is achieved through an iterative approach based on a pinhole mapping method, so that the feasible trajectory can be found in an efficient manner. The proposed approach is verified by three experiments on a real aerial manipulation platform. The experimental results show the effectiveness of the proposed method for the aerial pick-and-place task.

Robotics,Systems and Control
Motion Planning for Industrial Robots Based on Task Process Decomposition

Bu Wanghui,Liu Zhenyu,Tan Jianrong

DOI: https://doi.org/10.3901/cjme.2010.02.135

IF: 2.964

2010-01-01

Chinese Journal of Mechanical Engineering

Abstract:The existing research of the industrial robotic motion planning mainly focuses on the trajectory planning and the path planning, which aim at obtaining a minimum-time trajectory and finding an obstacle-free path respectively. In the trajectory planning, the jerks of robotic joints are usually not considered, so the smoothness of the robotic motion cannot be ensured. In the path planning, the complex spatial curves generally cannot be tracked easily, and it needs the fussy teach-and-playback operation. In this paper, based on the different constraint characteristic of the variable motion phases in the practical robotic task, the complicated task is decomposed into two kinds of sub processes, which are the free motion process and the constrained motion process. In the free motion process, the kinematic models of quasi trapezoidal waveform and quasi triangular waveform are proposed with the dynamic limits of maximum velocities, accelerations and jerks of robotic joints, so the minimum-time trajectory can be obtained with the motion smoothness. In the constrained motion process, the mathematical presentation of the task paths is extracted from the CAD models of the workpieces, so the complex spatial curves can be tracked autonomously without much teaching operation. In addition to the theoretical research, a robotic virtual prototyping system is also developed for the industrial arc welding production. The proposed research ensures the robotic motion smoothness, enhances the ability for tracking the complex spatial curves, and improves the quality and efficiency of the robotic motion planning.
Towards Safe and Aggressive Motion Generation for Dynamic Targets Pick-and-Place

Jun Shao,Jianfeng Liao,Han Li,Haoyang Zhang,Shiqiang Zhu,Wei Song,Yinchun Huang

DOI: https://doi.org/10.1109/IROS55552.2023.10341580

2023-01-01

Abstract:In this paper, we present a framework to generate time-optimal trajectories for dynamic target pick-and-place tasks. We develop an optimization-based trajectory generation method for manipulators, which can conduct spatial-temporal deformation under user-defined requirements. We formulate the problem of dynamic target pick-and-place, in which the trajectory duration and jerk are optimized and terminal states are adjusted instead of being fixed. The motions are constrained within the mechanical limits and to avoid collisions. Constraints transcription is adopted to convert constraints to weighted penalties. Then the problem can be solved based on the trajectory generation method with a high-level optimizer. We integrate the proposed method with online perception into a robot arm platform, in which a conveyor belt is used to transport the objects. Simulations and real-world experiments are conducted under a range of object speeds. Results show that the proposed method achieves online grasping under the object velocity up to 0.5m/s with an average computing time of 190ms.
A Robotic Semantic Grasping Method for Pick-and-place Tasks

Shanshan Zhu,Xiaoxiang Zheng,Ming Xu,Zhiwen Zeng,Hui Zhang

DOI: https://doi.org/10.1109/cac48633.2019.8996328

2019-01-01

Abstract:In recent years, it has attracted significant interest for mobile robots to complete the grasping tasks. A fully autonomous robotic pick-and-place system requires dependable object recognition and localization in cluttered environments. Most of current robot grasping methods based on learning mostly train the models with exploiting human-labeled datasets, then grasping perpendicularly to the plane where the object is placed. In this paper, a robotic semantic grasping method is proposed to estimate six-degree-of-freedom (6DOF) grasping pose for the robotic manipulator, thereby a grip perpendicularly to the surface of the object can be achieved. Firstly, the graspable location is detected by an instance segmentation detection model and ellipse fitting method. Secondly, by processing the pixel mask and point clouds of the target object, the 6DOF grasping pose is estimated. Finally, the proposed method was implemented and tested in a real robot manipulator. Experimental results show that the proposed semantic grasping method enables to accomplish pick-and-place tasks in an unstructured scene.
Type Synthesis and Trajectory Planning of 5-DOF Redundantly Actuated Parallel Robots with Large Output Rotational Angles for Large Workpieces

Bingshan Jiang,Guanyu Huang,Shiqiang Zhu,Hairong Fang,Xinyu Tian,Anhuan Xie,Lan Zhang,Pengyu Zhao,Jianjun Gu,Lingyu Kong

DOI: https://doi.org/10.1017/s0263574723001467

IF: 2.7

2024-01-01

Robotica

Abstract:Aerospace represents the development of national science and technology. It is an important foundation for exploring space and an important guarantee for the construction of aerospace power. There are many large workpieces in the aerospace field. The box insulation layer of large workpieces is an important processing problem. A new thick processing equipment is proposed to process the box insulation layer of large workpieces. The thick processing equipment consists of the XYZ shaft long guide rail and five degrees of freedom (5-DOF) RAPA. The mechanical structure of the 5-DOF RAPA is a redundantly actuated parallel mechanism (RAPM). Meanwhile, this paper proposes a new method to design 5-DOF redundantly actuated parallel mechanisms (RAPMs) with large output rotational angles. Based on configuration evolution and Li group, two articulated moving platforms (AMPs) and four kinds of limbs are designed, and a series of 3T2R (T represents translation, R represents rotation) RAPMs and 2T3R RAPMs are synthesized. To verify the designed RAPMs with large angle, an example of RAPMs, 4UPS-{2UPR}-R is analyzed. To ensure that the RAPM has no mechanism vibration impact in movement, this paper represents the RAPM adopts a newly proposed trajectory planning method. The results show that the 4SPU-(2UPR)R mechanism possesses large angles and verifies the efficiency of the new proposed trajectory planning method in simplified trajectories. This work lays the foundation for processing the box insulation layer of large workpieces with straight lines and arcs paths.
Anytime Multi-arm Task and Motion Planning for Pick-and-Place of Individual Objects via Handoffs

Rahul Shome,Kostas E. Bekris

DOI: https://doi.org/10.48550/arXiv.1905.03179

2019-05-09

Abstract:Automation applications are pushing the deployment of many high DoF manipulators in warehouse and manufacturing environments. This has motivated many efforts on optimizing manipulation tasks involving a single arm. Coordinating multiple arms for manipulation, however, introduces additional computational challenges arising from the increased DoFs, as well as the combinatorial increase in the available operations that many manipulators can perform, including handoffs between arms. The focus here is on the case of pick-and-place tasks, which require a sequence of handoffs to be executed, so as to achieve computational efficiency, asymptotic optimality and practical anytime performance. The paper leverages recent advances in multi-robot motion planning for high DoF systems to propose a novel multi-modal extension of the dRRT* algorithm. The key insight is that, instead of naively solving a sequence of motion planning problems, it is computationally advantageous to directly explore the composite space of the integrated multi-arm task and motion planning problem, given input sets of possible pick and handoff configurations. Asymptotic optimality guarantees are possible by sampling additional picks and handoffs over time. The evaluation shows that the approach finds initial solutions fast and improves their quality over time. It also succeeds in finding solutions to harder problem instances relative to alternatives and can scale effectively as the number of robots increases.

Robotics
Collision-Free Motion Planning of a Six-Link Manipulator Used in a Citrus Picking Robot

Zuoliang Tang,Lijia Xu,Yuchao Wang,Zhiliang Kang,Hong Xie

DOI: https://doi.org/10.3390/app112311336

2021-11-30

Applied Sciences

Abstract:This paper presents the results of a motion planning algorithm that has been used in an intelligent citrus-picking robot consisting of a six-link manipulator. The real-time performance of a motion planning algorithm is urgently required by the picking robot. Within the artificial potential field (APF) method, the motion planning of the picking manipulator was basically solved. However, the real-time requirement of the picking robot had not been totally satisfied by APF because of some native defects, such as the large number of calculations used to map forces into torques by the Jacobian matrix, local minimum trap, and target not reachable problem, which greatly reduce motion planning efficiency and real-time performance of citrus-picking robots. To circumvent those problems, this paper proposed some novel methods that improved the mathematical models of APF and directly calculates the attractive torques in the joint space. By using the latter approach, the calculation time and the total joint error were separately reduced by 54.89% and 45.41% compared with APF. Finally, the novel algorithm is presented and demonstrated with some illustrative examples of the citrus picking robot, both offline during the design phase as well as online during a realistic picking test.
Pose-Shape Unified Planning of Cable-driven Serial Manipulators Based on Multiple Arm-Angle Construction

Wenshuo Li,Bin Liang,Boyang Lin,Junxiang Li,Wenfu Xu

DOI: https://doi.org/10.1109/robio58561.2023.10354929

2023-01-01

Abstract:Cable-driven serial manipulator (CDSM) has slender body and high dexterity. Hence it has large potentials in confined space application. However, in terms of complicated motion, achieving overall shape planning and control for the manipulator as a whole has been rarely accomplished, greatly limiting the utilization of redundant degrees of freedom. Therefore, this paper proposes a pose-shape unified planning method based on multiple arm-angle construction and optimization. Firstly, we derive the multi-space mapping relationships, in particularly introducing the concept of arm shape for joint space and deriving the corresponding analytical expressions. Subsequently, we derive the Jacobian matrix of Multiple arm-angel, which theoretically guarantees the efficiency of planning and the ability to achieve acceptable goals in a globally feasible and stable manner. Simulations demonstrate that our framework enables rapid and efficient arm-angles planning while ensuring high pose accuracy. Finally, experiments are conducted using the CDSM to verify the arm's motion capabilities, including pose adjustment and maintaining arm shape during movement. Compared to other planning and closed-loop control methods, the results confirm the consistency and reliability of the arm shape and end-effector pose.
On-line Sensing and Action Planning in an Autonomous and Distributed Multi-Arm System

HB Zha,H Nagahama,T Hasegawa

DOI: https://doi.org/10.1109/icsmc.1997.633112

1997-01-01

Abstract:In this paper, we describe a method for pushing an object on a slanted plane by multiple robot arms in an autonomous and cooperative manner. In order to decide its own action, each arm obtains accurate estimation of poses of the object by fusing information obtained from its own force/torque(F/T) and vision sensors. Furthermore, we present a new planning algorithm for changing pushing points so that the system would have more flexibility to various situations. The effectiveness of the proposed method is investigated by some numerical simulations
rduino Controlled Pick n Place RoboticArm

Masoud Yousefi

DOI: https://doi.org/10.48550/arXiv.2103.09970

IF: 3.7

2021-03-18

Robotics

Abstract:This document is an introduction to designing a multiple degree of freedom robotic manipulator. The goal of the robot is to sort an object based upon the objects color. The robot will be a synthesis of several linkages, servo motors, an Arduino system, and an end-effector. The design must be able to autonomously determine what object to move and where to place it. The robot will have a maximum reach of 24 horizontally. The operating conditions include being able to sort several different colored spheres within the area of a 180{\deg} up to 16 from the base of the arm. Sorting consists of picking up the object from a random position near the base and moving it to a storing location near the edge of the defined operating range. With the following performance criteria and a limited budget, the final design will enter a competition to determine the most robust, and effective robotic manipulator.
Research on Collaboration Motion Planning Method for a Dual-Arm Robot Based on Closed-Chain Kinematics

Yuantian Qin,Kai Zhang,Kuiquan Meng,Zhehang Yin

DOI: https://doi.org/10.3390/machines12060387

IF: 2.899

2024-06-05

Machines

Abstract:Aiming to address challenges in the motion coordination of dual-arm robot engineering applications, a comprehensive set of planning methods is devised. This paper takes a dual-arm system composed of two six-degrees-of-freedom industrial robots as the research object. Initially, a transformation model is established for the characteristic trajectories between the workpiece coordinate system and various other coordinate systems. Subsequently, the position and orientation curves of the working trajectory are discretized to facilitate the controller's execution. Furthermore, an analysis is conducted of the closed-chain kinematics relationship between two arms of the robot and a pose-calibration method based on a reference coordinate system is introduced. Finally, constraints to the collaborative motion of the dual-arm robot are analyzed, leading to the establishment of a motion collaboration planning methodology. Simulations and experiments demonstrate that the proposed approach enables effective and collaborative task planning for dual-arm robots. Moreover, joint angle and angular velocity curves corresponding to the motion trajectory exhibit smoothness, reducing joint impacts.

engineering, mechanical, electrical & electronic
Efficient online motion planning method for the robotic arm to pick-up moving objects smoothly with temporal constraints

Shimin Wei,Bo Liu,Mingfeng Yao,Xiuli Yu,Ling Tang

DOI: https://doi.org/10.1177/09544062221087849

2022-05-22

Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. This paper proposes a new efficient online motion planning method for the manipulator to grasp moving objects smoothly. The algorithm framework consists of front-end pathfinding and back-end nonlinear trajectory optimization. The sample-based pathfinding algorithm can predict the intersection location and find a safe initial path in the dynamic environment. The gradient-based continuous-time trajectory optimization method converts the Euclidean Signed Distance Field information into the joint space, uses the B-spline curve to represent the joint trajectories, optimizes the initial path using convex hull characteristics of B-spline, and generates a smooth and kinematics feasible trajectory in joint space. Finally, we use an adjustment method of iterative trajectory fragment length to guarantee kinodynamic feasibility. Simulation comparisons and real-world experiments verify our planning framework's high performance.
Conceptual Design and Kinematic Analysis of a Novel Parallel Robot for High-Speed Pick-and-place Operations

Qizhi Meng,Fugui Xie,Xin-Jun Liu

DOI: https://doi.org/10.1007/s11465-018-0471-4

IF: 4.063

2017-01-01

Frontiers of Mechanical Engineering

Abstract:This paper deals with the conceptual design, kinematic analysis and workspace identification of a novel four degrees-of-freedom (DOFs) high-speed spatial parallel robot for pick-and-place operations. The proposed spatial parallel robot consists of a base, four arms and a 1½ mobile platform. The mobile platform is a major innovation that avoids output singularity and offers the advantages of both single and double platforms. To investigate the characteristics of the robot’s DOFs, a line graph method based on Grassmann line geometry is adopted in mobility analysis. In addition, the inverse kinematics is derived, and the constraint conditions to identify the correct solution are also provided. On the basis of the proposed concept, the workspace of the robot is identified using a set of presupposed parameters by taking input and output transmission index as the performance evaluation criteria.
Pick-and-place in dynamic environments with a mobile dual-arm robot equipped with distributed distance sensors

Sotiris Stavridis,Pietro Falco,Zoe Doulgeri

DOI: https://doi.org/10.1109/humanoids47582.2021.9555672

2021-07-19

Abstract:Mobile bimanual manipulation in a dynamic and uncertain environment requires the continuous and fast adjustment of the robot motion for the satisfaction of the constraints imposed by the task, the robot itself and the environment. We formulate the pick-and-place task as a sequence of mobile manipulation tasks with a combination of relative, global and local targets. Distributed distance sensors on the robot are utilized to sense the surroundings and facilitate collision avoidance with dynamic and static obstacles. We propose an approach to kinematically control the robot by solving a priority constrained optimization problem online. Experimental results on the YuMi bimanual robot mounted on the Ridgeback mobile platform validate the performance of the proposed approach.
Modeling, Cooperative Planning and Compliant Control of Multi-arm Space Continuous Robot for Target Manipulation

Jianqing Peng,Haoxuan Wu,Chi Zhang,Qihan Chen,Deshan Meng,Xueqian Wang

DOI: https://doi.org/10.1016/j.apm.2023.05.019

IF: 5.336

2023-05-19

Applied Mathematical Modelling

Abstract:In this paper, a modeling, cooperative planning and compliant control method is presented for multi-arm space continuous robots in target manipulation. Firstly, according to the closed-chain relationship between the multi-arm space continuous robot and the target, the general equations of the closed-chain kinematics and the closed-chain dynamics are derived. Secondly, according to the above mathematical equations, the trajectory planning model of multi-arm space continuous robots for pre-capture and post-capture is established. For the pre-capture process, the null space is used to search out the cable length parameters under the limited joint angle. For the post-capture process, the nonlinear optimization method is used to find the solution that minimizes the disturbance of the base. Thirdly, aiming at the problem of internal force distribution and pose control after target capture, a compliant control model of multi-arm space continuous robots for target manipulation is constructed, so as to minimize the cable tension in the process of force/pose hybrid control. Finally, the proposed method is verified based on the Matlab/Simechanics co-simulation model. The simulation results prove the effectiveness of the proposed method.

mechanics,engineering, multidisciplinary,mathematics, interdisciplinary applications

MOTION PLANNING FOR PICK-AND-PLACE OPERATIONS OF A MULTI-JOINT ROBOTIC ARM

Smooth Joint Motion Planning for Redundant Fiber Placement Manipulator Based on Improved RRT*

A Topological Implementation for Motion Planning of a Robotic Arm

Preparatory Manipulation Planning using Automatically Determined Single and Dual Arms

Multi-Arm Trajectory Planning for Optimal Collision-Free Pick-and-Place Operations

Pick and Place Planning is Better than Pick Planning then Place Planning

Motion Planning for Aerial Pick-and-Place based on Geometric Feasibility Constraints

Motion Planning for Industrial Robots Based on Task Process Decomposition

Towards Safe and Aggressive Motion Generation for Dynamic Targets Pick-and-Place

A Robotic Semantic Grasping Method for Pick-and-place Tasks

Type Synthesis and Trajectory Planning of 5-DOF Redundantly Actuated Parallel Robots with Large Output Rotational Angles for Large Workpieces

Anytime Multi-arm Task and Motion Planning for Pick-and-Place of Individual Objects via Handoffs

Collision-Free Motion Planning of a Six-Link Manipulator Used in a Citrus Picking Robot

Pose-Shape Unified Planning of Cable-driven Serial Manipulators Based on Multiple Arm-Angle Construction

On-line Sensing and Action Planning in an Autonomous and Distributed Multi-Arm System

rduino Controlled Pick n Place RoboticArm

Research on Collaboration Motion Planning Method for a Dual-Arm Robot Based on Closed-Chain Kinematics

Efficient online motion planning method for the robotic arm to pick-up moving objects smoothly with temporal constraints

Conceptual Design and Kinematic Analysis of a Novel Parallel Robot for High-Speed Pick-and-place Operations

Pick-and-place in dynamic environments with a mobile dual-arm robot equipped with distributed distance sensors

Modeling, Cooperative Planning and Compliant Control of Multi-arm Space Continuous Robot for Target Manipulation