The Elements and Method for Working Procedure Quality Control During Expressway Construction

Lei Shao

2001-01-01

Abstract:This paper provides an introduction of the elements and method for working procedure quality control during expressway construction, illustrates the judgment on nature and the analysis on quantity to the working procedure by way of the mathematical statistics

What problem does this paper attempt to address?

Quality Control of Pavement Construction

Jun Wang

2003-01-01

Abstract:The key points in quality control of highway works are introduced. At the same time discussion is made according to smoothness, quality assurance system and other aspects. Author points out that intensifying construction supervision and enhancing personnel's quality are the effective way to ensure the construction quality.
Analysis on On-Site Asphalt Pavement Quality Inspection Technology in Highway Engineering

Daqing Wu,Yan Liu,Yunyong Zhou,Ke Tu,Yingying Ye

DOI: https://doi.org/10.26689/jard.v7i2.4813

2023-03-29

Journal of Architectural Research and Development

Abstract:The acceleration of urbanization has promoted the increase in the number of urban highway projects, resulting in an increase of emphasis on the quality of urban highway projects. The quality and safety of highway construction directly affects the driving comfort, safety, and service life after it is put into operation. Among them, asphalt pavement is an important structure in highway construction, and it is also a key link that directly affects the construction quality. In order to ensure the quality of construction, it is necessary to strengthen on-site testing during the construction process to discover problems in time, and to ensure that the construction is up to standard. This paper mainly presents an analysis on the necessity and application of on-site quality inspection technology for asphalt pavement construction of highway engineering, and outlines measures to improve highway engineering construction testing technology.

English Else
Quality control of bituminous pavement

Sun Shu-dong

2003-01-01

Abstract:With the practice of bituminous pavement construction in Huihe expressw ay(Xiaojingkou to Pingnan section),introduce each of the construction technology of AK13-B,AC -20I and AC -25II sectio n pavement structural layer.
Monitoring Technology of Construction Quality for Expressway Pavement

Liu Jianhua,Xu Wei

DOI: https://doi.org/10.3963/j.issn.1671-7570.2008.06.016

2008-01-01

Abstract:Based on the practice of a circle city expressway of Guangzhou,the monitor technology of construction quality for expressway pavement is summarized including the monitoring effect,monitoring content,monitoring process and monitoring method.
Study on the Control Methods and Instrument Choices of Construdion Quality of Highway Subgrade

Ping XU,Fu-ming WANG,Ying-chun CAI,Zhong-ping CHEN

DOI: https://doi.org/10.3969/j.issn.1004-4655.2009.03.001

2009-01-01

Abstract:To evaluate the construction quality accurately is the important measure to assure that the highway structure strength can reach the design requirement.The building subgrade of Tai-ao highway was taken as the engineering example,some representative segments were selected,the point to point mode was adopted,and then the flexures,dielectric constants and degrees of compaction of the points were tested by the FWD(dynamic falling weight deflectometer) with different tons of 1 ton,3 tons and 5 tons,BB(static Benkenlman beam),PFWD(portable falling weight deflectometer),GPR(ground penetrating radar),dielectric constant device,and sand cone method.In the end,the applications of FWD,PFWD and GPR to control the construction quality of highway subgrade have been proved in this paper.
ELEMENTARY INTRODUCTION ON QUALITY CONTROL IN CONSTRUCTION STAGE FOR ENGINEERING PROJECTS

Peng Jing

2001-01-01

Abstract:The procedure and particular methods of engineering qulity control in construction stage of engineering projects adopted by supervising engineers are introduced in this paper. And it can be used for reference by supervising engineers in quality control processes.
Total Quality Management of Construction of Asphalt Concrete Pavements

ZHANG Xiao-ning

DOI: https://doi.org/10.3969/j.issn.0451-0712.2005.02.013

2005-01-01

Abstract:Quality and life of asphalt concrete pavement construction are the most importanttechnology question in the expressway construction. Nearly all kinds of early damage to asphalt pavements result from the wrong construction method or the poor management system. Thus, it is very important to do research on the total quality management system of asphalt concrete pavement construction. It must have a wide future and it is also helpful to build our own expressway quality management system of asphalt pavement construction. A method which is tried to build a total quality management system of asphalt construction on about 400 km expressway is discussed in this paper. The model and the approach to build the total quality management system of asphalt construction are also discussed.
On Management of Road Construction Claims

Lei Shao

2001-01-01

Abstract:According to the current situation on management of Claims during road construction, the paper illustrates the necessity of the efficient management, besides, it also puts forward the recommended methods accordingly.
Compaction Quality Control of Expressway Rock Embankment in Mountain Area

La-geng SHAO,Zhi-yong FU,Chuang-ming LI,Yong-gao TAN,Jing-li CHEN

DOI: https://doi.org/10.3969/j.issn.1002-0268.2005.02.008

2005-01-01

Journal of Highway and Transportation Research and Development

Abstract:There are different methods for the compaction quality control criterion of rock embankment in the world.The paper discussed the technology of compaction quality control for expressway rock embankment in mountain area based on YiChang Expressway Rock Embankment,and compared with compactness,percentage solid volume,compaction times,loose laying depth,percentage settlement and dynamic modulus.At last,an express quality control method without damage for stone embankment is put forward.
Analysis on the common quality defects of the road construction and its treatment

Chen Yi

Abstract:Based on practical experience of road construction for many years, this article introduces common quality defects on road construction are introduced, their causing reasons are discussed, and corresponding prevention and control measures are proposed.

Engineering,Environmental Science
The Method Study on Controlling the Constructing Quality of Bituminous Pavement Based on Large Sample Data

姚岢,黎侃,张肖宁,张建莉

DOI: https://doi.org/10.3969/j.issn.1671-8496.2008.03.001

2008-01-01

Abstract:In order to further perfect the controlling method and evaluation means of constructing quality of bituminous pavement in our country,starting from the thinking of process control,this paper has obtained large sample test data of pavement constructing by non-destructive test,has analyzed the uniformity of test data by using gray image evaluation method and statistic evaluation method,thus has evaluated constructing quality of bituminous pavement.Practice shows that the two evaluation methods based on large sample test data can effectively evaluate constructing quality of bituminous pavement,and can provide forceful technique support to guide succedent construction.
Calculation and Analysis of CO2 Emission from Expressway Construction

WANG Xian-wei,WU Ling-sheng,YANG Dong-yuan

DOI: https://doi.org/10.3969/j.issn.1002-0268.2014.02.025

2014-01-01

Journal of Highway and Transportation Research and Development

Abstract:In order to calculate and analyze the carbon dioxide(CO_2) emission during expressway construction,the expressway construction process is defined into 3 stages:production of raw materials,transportation of raw materials and mechanical construction.First,the CO_2 emission calculation methods for expressway construction are summarized,the calculation flowchart of engineering CO_2 emission is given from the project budget sheet Second,with the method applied to a proposed expressway in southwest China,CO_2emissions are calculated for stages of subgrade engineering,pavement engineering,bridge engineering and tunnel engineering,and the CO_2 emissions' components are analyzed in detail.At last,the CO_2 emission levels of unit quantity in different engineering types are compared regarding with road engineering,bridge engineering and tunnel engineering.The results indicate that(1) the total CO_2 emission of the expressway comes mainly from raw material production stage,accounting for 89.64%;(2) the machinery construction phase accounts for 9.11%;(3) the transport of raw materials stage accounts for only 1.25%.As for comparison of CO_2 emission levels of unit quantity in different engineering types,road engineering is 6 803 t/km,bridge engineering is 48 324 t/km,and tunnel project is 37 631 t/km.By comparison and discussion with the existing studies,the reliability of the results is verified.
Analysis and Discussion about Errors of Asphalt Comparative Tests in Yue-Gan Expressway

Zhi-xiong QIU,Ke YAO,Zhi LI

DOI: https://doi.org/10.3969/j.issn.0451-0712.2005.12.041

2005-01-01

Abstract:The conclusions that the comparative tests are an effective way to distinguish laboratory test levels are educed by analyzing results of asphalts tested by different laboratories in Yue-Gan Expressway.Some important things are expatiated with emphasis in this paper,such as actualizing project and analyzing method of test data of the comparative tests,and right analysis of results of computing data,especially how to use the two laboratory consistency statistics k and h to estimate precision and accuracy of the test and error level and reliability of the test data.
Study on Quality Control Measures of Bored Pile in Highway Bridge Construction

Liao Leiyi,Zhang Ruitao

DOI: https://doi.org/10.62517/jcte.202406213

2024-06-01

Abstract:Quality control of bored pile is crucial to the safety and durability of the whole project. This study proposes corresponding control measures for the main quality problems existing in the construction process of bored pile, including site preparation, drilling construction, steel cage production, concrete pouring and other links. Effective quality control measures can significantly improve the overall quality of bored pile, to ensure the safety and durability of highway bridge engineering.
An Effectiveness Study of SPC Control Charts on the Quality Control for Construction in Asphalt Pavement

Zhiyong Xu,Qiang Zhou,Gang Chen,Yun Wang,Xiongwei Yang,Zhen Liu

DOI: https://doi.org/10.1088/1755-1315/787/1/012115

2021-06-01

IOP Conference Series: Earth and Environmental Science

Abstract:Abstract Aiming at the problems of insufficient dynamic control and data mining of Expressway pavement construction quality in Yunnan, this paper analyzes the application of Exponentially Weighted Moving Average (EWMA) control chart in dynamic control of Expressway asphalt pavement construction quality. Firstly, the quality characteristic value of pavement construction is defined as the data type of multiple variation sources, and the mathematical model of multiple variation sources is studied to solve the problem of excessive false alarm. Then, on the theoretical basis of statistical process control (SPC), the paper compares and analyzes the three control chart schemes of traditional Hugh Hart control chart, Tabular Cumulative Sum (CUSUM) control chart and EWMA control chart, and concludes that the application effect of EWMA control chart is obviously better than the other methods in the aspects of applicability and inspection output. Finally, combining with the measured data of asphalt mixture temperature and asphalt weight in pavement construction, EWMA control diagram is used to carry out practical research, and the results are better.
The Uniformity Evaluation Method on Construction Quality of Asphalt Pavement

Xue-tang XIONG,Xiao-ning ZHANG,Jiang-miao YU,Shang-wu SU

DOI: https://doi.org/10.3969/j.issn.1671-1815.2017.33.024

2017-01-01

Abstract:Asphalt pavement construction segregation leading to pavement non-uniformity is the main source of early disease.With the large sample density's detection data of new asphalt pavement from a new generation of Pavement Quality Indicator (PQI 380),the pavement construction was assessed with consistent analysis of comparison test,voids interval statistics,voids two-dimensional and three-dimensional grayscale image methods.The results of comprehensive comparison show that the above methods could establish the uniformity evaluation index and quantitatively evaluate the lateral,longitudinal and integral construction uniformity quality of asphalt pavement.They couled also determine the location,size and cause of pavement segregation area.
On Quality Control of Retaining Backwall Refilling of Changzhang Expressway

Yu-bao ZHAO,Jian-xin LIU

DOI: https://doi.org/10.3969/j.issn.1004-5716.2005.06.095

2005-01-01

Abstract:Combining with the drilled core testing reality of retaining backwall refilling in the construction of Changzhang expressway, the quality control and verification criterion feasibility of retaining backwall refilling are discussed.
Brief Analysis on the Quality Control of Concrete Construction

LI Yun-long,ZHANG Jian

DOI: https://doi.org/10.14165/j.cnki.hunansci.2010.21.016

2010-01-01

Abstract:The quality of concrete decides the quality of construction engineering,and it has great impact on the safety and cost of construction engineering.This paper analyzes from the aspects of the material control of concrete,the control of construction mix proportion,the quality control of concrete in the process of transportation and pouring and the control of concrete maintenance,and proposes the requirements of the concrete quality control.
Research on Pavement Construction Compaction Quality Control Based on Rapid Density Measuring by Large Sample

Hongjie LI,Jiangmiao YU,Siwei HU,Zili LU

DOI: https://doi.org/10.3969/j.issn.1671-7619.2017.02.001

2017-01-01

Abstract:PQI (Pavement Quality Indicator) has been widely used in the construction quality control of highway asphalt pavement.In this paper,being combined with construction of the middle surface layer test road of Contract No.T22 of Shantou-Zhanjiang Expressway,the detection principle and calibration method of the third generation PQI380 have been introduced,comparison between PQI method and cored drilling method has been carried out to verify the measurement accuracy of PQI.Thus,the compaction quality of the middle surface layer test road has been controlled with PQI,according to the curve relationship between rolling times and the actually measured densities,a conclusion that the rolling times should not exceed 4 times in the middle surface construction has been drawn.Being based on the high-frequency density data collected by PQI after construction,mathematical statistics and the grayscale images have been used to evaluate the quality uniformity of pavement construction,with the weak areas being determined and causes being analyzed,which could provide guidance to improve the construction process and machinery equipment in the subsequent construction and remedial measures.
Study on Evaluation Method for Expressway Management Level

He Zhenxing,Wen Huiying,He Zhengqiang

DOI: https://doi.org/10.3969/j.issn.1672-9889.2007.02.027

2007-01-01

Abstract:According to evaluation procedure,the article establishes indexes system of evaluation for Expressway Management level and index weight on the basis of such aspects as exterior field management and interior field management for expressway,establishment of leader organization and institution as well as integrated management.Then, it introduces evaluation method for both quantitative and qualitative indexes in detail using the inward interception and comprehensive analysis method.Finally,it discusses application conditions of this evaluation methed for expressway management level.

The Elements and Method for Working Procedure Quality Control During Expressway Construction

Quality Control of Pavement Construction

Analysis on On-Site Asphalt Pavement Quality Inspection Technology in Highway Engineering

Quality control of bituminous pavement

Monitoring Technology of Construction Quality for Expressway Pavement

Study on the Control Methods and Instrument Choices of Construdion Quality of Highway Subgrade

ELEMENTARY INTRODUCTION ON QUALITY CONTROL IN CONSTRUCTION STAGE FOR ENGINEERING PROJECTS

Total Quality Management of Construction of Asphalt Concrete Pavements

On Management of Road Construction Claims

Compaction Quality Control of Expressway Rock Embankment in Mountain Area

Analysis on the common quality defects of the road construction and its treatment

The Method Study on Controlling the Constructing Quality of Bituminous Pavement Based on Large Sample Data

Calculation and Analysis of CO2 Emission from Expressway Construction

Analysis and Discussion about Errors of Asphalt Comparative Tests in Yue-Gan Expressway

Study on Quality Control Measures of Bored Pile in Highway Bridge Construction

An Effectiveness Study of SPC Control Charts on the Quality Control for Construction in Asphalt Pavement

The Uniformity Evaluation Method on Construction Quality of Asphalt Pavement

On Quality Control of Retaining Backwall Refilling of Changzhang Expressway

Brief Analysis on the Quality Control of Concrete Construction

Research on Pavement Construction Compaction Quality Control Based on Rapid Density Measuring by Large Sample

Study on Evaluation Method for Expressway Management Level