Analysis of the Singularity Space of the Parallel Manipulator

Xin Zhao

2001-01-01

Abstract:Based on the instantaneous motion, the singular configuration equation is obtained for the parallel manipulator. Through the simulation, the singularity space form is obtained and that makes it possible to confirm the actual workspace of the parallel manipulator.

What problem does this paper attempt to address?

Analysis of the Singularity of Spatial Parallel Manipulator with Terminal Constraints

JS Zhao,ZJ Feng,K Zhou,JX Dong

DOI: https://doi.org/10.1016/j.mechmachtheory.2004.07.011

IF: 4.93

2004-01-01

Mechanism and Machine Theory

Abstract:In this paper, we make an analysis on the singularity of spatial parallel manipulator. Although many scholars have discussed this topic, their works mainly focused on finding the methods to divide the cases of singularity or searching the solutions with Jacobian matrices. This paper, on the other hand, addresses the singularity problems of the manipulator with its terminal constraints, which are the reciprocal screws of the manipulator’s sub-kinematic chains. Through investigating the kinematic screws and the terminal constraints of the sub-chains, this method not only avoids solving the Jacobian matrices, but also points out the physical meaning of singularity. Application analyses are presented to demonstrate the effectiveness of the method.
Position, Singularity and Workspace Analysis of 3-Psr-o Spatial Parallel Manipulator

Jiejie Shao,Wenyu Chen,Xin Fu

DOI: https://doi.org/10.3901/cjme.2015.0122.018

2015-01-01

Abstract:Although the parallel mechanisms have the advantages of high accuracy, velocity, stiffness, and payload capacity, the shortcomings of the space utilization and workspace limit the applications in the confined space. A novel 3 degrees of freedom spatial parallel manipulator 3-PSR-O (prismatic-spherical-revolute) is proposed, which possesses a compact architecture and extended workspace while maintaining the inherent advantages of the parallel mechanisms. The direct-inverse position, singularity and workspace are investigated. The mapping method is adopted in the position analysis, and the closed form solution is derived in the form of a six order equation. The singularity analysis of the mechanism is also carried out based on the geometrical constraints, including six singularity boundaries. A feature boundary, which is independent of the prismatic joints' stroke limit, is obtained by integrating the six singularity boundaries. According to the formation of the reachable workspace, a concept of basic workspace is also introduced and presented in the analytical way. By demarcating the basic workspace along the central height with the feature boundary, the reachable workspace can be derived and analyzed more efficiently. Finally, a comparative study on the space utilization between the 3-PSP parallel mechanism and the new mechanism is also presented. The area of feature boundary of the new mechanism is about 140% of the 3-PSP parallel mechanism, while its installation radius is only 1/2 of the 3-PSP parallel mechanism. The proposed parallel mechanism shows great space utilization, and is ideally suited for applications in confined space occasions such as immersion lithography, nano-imprint etc.
Singularity analysis of a new parallel manipulator with revolute actuators

XJ Liu,XQ Tang,JS Wang

2004-01-01

Abstract:This paper concerns the singularity of a new parallel manipulator, HALF, a novel three degrees of freedom (DoFs) mechanism with revolute actuators. The parallel manipulator, proposed previously, consists of a base plate, a movable platform, and three connecting legs. It has the advantages in terms of only single-DoF joints and high mobility. The parallel manipulator has wide application in the fields of industrial robots, simulators, parallel machine tools and any other manipulating devices that high mobility is required. The inverse kinematics problem and Jacobian matrices are recalled firstly. And then all possible singularities of the manipulator are analyzed in detail. The results of the paper are very useful for the apprehension and the application of the manipulator.
Singularity Analysis of the HALF Parallel Manipulator with Revolute Actuators

XJ Liu,J Kim,KK Oh

DOI: https://doi.org/10.1109/robot.2003.1241686

2003-01-01

Abstract:This paper concerns the singularity of the half parallel manipulator, a novel three degrees of freedom (DOFs) mechanism, with revolute actuators. The parallel manipulator, proposed previously, consists of a base plate, a movable platform, and three connecting legs. It has the advantages in terms of only single-DOF joints and high rotational capability. The parallel manipulator has wide application in the fields of industrial robots, simulators, parallel machine tools and any other manipulating devices that high rotational capability is required. The inverse kinematics problem and Jacobian matrices are recalled firstly. And then all possible singularities of the manipulator are analyzed in detail. The results of the paper are very useful for the apprehension and the application of the manipulator.
A New Approach for Singularity Analysis and Closeness Measurement to Singularities of Parallel Manipulators

Xin-Jun Liu,Chao Wu,Jinsong Wang

DOI: https://doi.org/10.1115/1.4007004

2012-01-01

Journal of Mechanisms and Robotics

Abstract:Singularity analysis is one of the most important issues in the field of parallel manipulators. An approach for singularity analysis should be able to not only identify all possible singularities but also explain their physical meanings. Since a parallel manipulator is always out of control at a singularity and its neighborhood, it should work far from singular configurations. However, how to measure the closeness between a pose and a singular configuration is still a challenging problem. This paper presents a new approach for singularity analysis of parallel manipulators by taking into account motion/force transmissibility. Several performance indices are introduced to measure the closeness to singularities. By using these indices, a uniform “metric” can be found to represent the closeness to singularities for different types of nonredundant parallel manipulators.
Singularity Analysis of Lower-Mobility Parallel Manipulators Using Grassmann-Cayley Algebra

Daniel Kanaan,Philippe Wenger,Stéphane Caro,Damien Chablat

DOI: https://doi.org/10.48550/arXiv.0910.4012

IF: 3.7

2009-10-21

Robotics

Abstract:This paper introduces a methodology to analyze geometrically the singularities of manipulators, of which legs apply both actuation forces and constraint moments to their moving platform. Lower-mobility parallel manipulators and parallel manipulators, of which some legs do not have any spherical joint, are such manipulators. The geometric conditions associated with the dependency of six Pl\"ucker vectors of finite lines or lines at infinity constituting the rows of the inverse Jacobian matrix are formulated using Grassmann-Cayley Algebra. Accordingly, the singularity conditions are obtained in vector form. This study is illustrated with the singularity analysis of four manipulators.
The Free Mobility of a Parallel Manipulator

Jing-Shan Zhao,Zhi-Jing Feng,Li-Ping Wang,Jing-Xin Dong

DOI: https://doi.org/10.1017/s0263574706002724

2006-01-01

Abstract:Singularities of a manipulator have been addressed repeatedly. However, the singularities and the degree(s) of freedom, as a matter of fact, are two different aspects of the mobility of a manipulator. Consequently, this paper dedicates to discussing the mobility properties through mobility space , which synchronously define the type, number and direction characteristics of the independent motions that the manipulator should execute. The mobility space of a manipulator can be obtained with reciprocal screws of the manipulator via singular value decomposition, which instantaneously depicts the singularity and mobility problems of the manipulators. Application example demonstrates that this methodology can investigate the all-sided mobility properties of parallel manipulators.
Singularity Analysis of the Planar 3-RRR Parallel Manipulator Considering the Motion/Force Transmissibility

Xiang Chen,Fugui Xie,Xin-jun Liu

DOI: https://doi.org/10.1007/978-3-642-33509-9_24

2012-01-01

Abstract:Singularity is an inherent characteristic of a closed-chain manipulator. This paper presents an approach to singularity analysis of the planar 3-RRR parallel manipulator. On the basis of screw theory, the motion/force transmission analysis of the manipulator is first achieved. The singularity is classified into three types: constraint singularity, input transmission singularity, and output transmission singularity, in which the last two ones can be investigated by two indices correspondingly. By using the proposed method, not only can all types of possible singularity configurations and their singular loci be identified, but their physical meanings are also explained in terms of their motion/force transmission performances, which make 3-RRR parallel manipulator more comprehensible.
Workspace and Singularity Analysis of a 3-DOF Planar Parallel Manipulator with Actuation Redundancy

Jinsong Wang,Jun Wu,Tiemin Li,Xinjun Liu

DOI: https://doi.org/10.1017/s0263574708004517

IF: 2.7

2009-01-01

Robotica

Abstract:SUMMARY This paper deals with the position workspace, orientation workspace, and singularity of a 3-degree-of-freedom (DOF) planar parallel manipulator with actuation redundancy, which is created by introducing a redundant link with active actuator to a 3-DOF nonredundant parallel manipulator. Based on the kinematic analysis, the position workspace and orientation workspace of the redundantly actuated parallel manipulator and its corresponding nonredundant parallel manipulator are analyzed, respectively. In the singularity analysis phase, the relationship between the generalized input velocity and the generalized output velocity is researched on the basis of the theory of singular value decomposition. Then a method to investigate the singularity of parallel manipulators is presented, which is used to determine the singularity of the redundantly actuated parallel manipulator. In contrast to the corresponding nonredundant parallel manipulator, the redundant one has larger orientation workspace and less singular configurations. The redundantly actuated parallel manipulator is incorporated into a 4-DOF hybrid machine tool which also includes a feed worktable to demonstrate its applicability.
Singularity analysis and detection of 6-UCU parallel manipulator

Guojun Liu,Zhiyong Qu,Xiaochu Liu,Junwei Han

DOI: https://doi.org/10.1016/j.rcim.2013.09.010

IF: 10.103

2014-01-01

Robotics and Computer-Integrated Manufacturing

Abstract:6-UCU kind Gough-Stewart platform (GSP) has been used extensively in practice. The singularity of GSP has been studied by many scholars, but their works mainly focused on finding the methods to divide the cases of singularity or searching the solutions with Jacobian matrices. On the other hand, this paper studies the singularities of 6-UCU parallel manipulator caused by not only the active joints but also passive universal joints. Two types of singularity are derived based on a degree of freedom method by using screw theory. Singularity detection is essential to certify the absence of singularity within a prescribed workspace or a reachable workspace for a practical use of the 6-UCU parallel manipulator. Algorithms are proposed by using evolutionary strategy to detect the singularity in the desired or reachable workspace of the 6-UCU parallel manipulator. Case studies are presented to demonstrate the effectiveness of the proposed singularity detection methods.
Screw Theory Based Singularity Analysis of Lower-Mobility Parallel Robots Considering the Motion/Force Transmissibility and Constrainability

Xiang Chen,Xin-Jun Liu,Fugui Xie

DOI: https://doi.org/10.1155/2015/487956

IF: 1.43

2015-01-01

Mathematical Problems in Engineering

Abstract:Singularity is an inherent characteristic of parallel robots and is also a typical mathematical problem in engineering application. In general, to identify singularity configuration, the singular solution in mathematics should be derived. This work introduces an alternative approach to the singularity identification of lower-mobility parallel robots considering the motion/force transmissibility and constrainability. The theory of screws is used as the mathematic tool to define the transmission and constraint indices of parallel robots. The singularity is hereby classified into four types concerning both input and output members of a parallel robot, that is, input transmission singularity, output transmission singularity, input constraint singularity, and output constraint singularity. Furthermore, we take several typical parallel robots as examples to illustrate the process of singularity analysis. Particularly, the input and output constraint singularities which are firstly proposed in this work are depicted in detail. The results demonstrate that the method can not only identify all possible singular configurations, but also explain their physical meanings. Therefore, the proposed approach is proved to be comprehensible and effective in solving singularity problems in parallel mechanisms.
A singularity handling algorithm based on operational space control for six-degree-of-freedom anthropomorphic manipulators

Zhi-Hao Kang,Ching-An Cheng,Han-Pang Huang

DOI: https://doi.org/10.1177/1729881419858910

IF: 1.714

2019-05-01

International Journal of Advanced Robotic Systems

Abstract:In this article, we analyze the singularities of six-degree-of-freedom anthropomorphic manipulators and design a singularity handling algorithm that can smoothly go through singular regions. We show that the boundary singularity and the internal singularity points of six-degree-of-freedom anthropomorphic manipulators can be identified through a singularity analysis, although they do not possess the nice kinematic decoupling property as six-degree-of-freedom industrial manipulators. Based on this discovery, our algorithm adopts a switching strategy to handle these two cases. For boundary singularities, the algorithm modifies the control input to fold the manipulator back from the singular straight posture. For internal singularities, the algorithm controls the manipulator with null space motion. We show that this strategy allows a manipulator to move within singular regions and back to non-singular regions, so the usable workspace is increased compared with conventional approaches. The proposed algorithm is validated in simulations and real-time control experiments.

robotics
On the Analysis of a New Spatial Three-Degrees-of-freedom Parallel Manipulator

Xj Liu,Js Wang,F Gao,Lp Wang

DOI: https://doi.org/10.1109/70.976031

2001-01-01

IEEE Transactions on Robotics and Automation

Abstract:In this paper, a new spatial three-degrees-of-freedom (two degrees of translational freedom and one degree of rotational freedom) parallel manipulator is proposed. The parallel manipulator consists of a base plate, a movable platform, and three connecting legs. The inverse and forward kinematics problems are described in closed forms and the velocity equation of the new parallel manipulator is given. Three kinds of singularities are also presented. The workspace for the manipulator is analyzed systematically; in particular, indices to evaluate the mobility (in this paper, mobility means rotational capability) of the moving platform of the manipulator will be defined and discussed in detail. Finally, a topology architecture of the manipulator is introduced. The parallel manipulator has wide application in the fields of industrial robots, simulators, micromanipulators, and parallel machine tools
HANA: a novel spatial parallel manipulator with one rotational and two translational degrees of freedom

Xin-Jun Liu,Xiaoqiang Tang,Jinsong Wang

DOI: https://doi.org/10.1017/S0263574704000931

IF: 2.7

2005-01-01

Robotica

Abstract:This paper concerns the proposal and analysis of HANA, a novel spatial parallel manipulator with over constraint. The parallel manipulator consists of a base plate, a movable platform, and three connecting legs. The moving platform has three degrees of freedom (DoFs), which are two degrees of translational freedom and one degree of rotational freedom, with respect to the base plate. The new parallel manipulator is very interesting for the reason of a lack of singularity in its workspace, single-DoF joint architecture and high rotational capability of its moving platform. The inverse and forward kinematics problems are described in closed-forms. The velocity equation of the new parallel manipulator is given. Three kinds of singularities are presented. The workspace for the manipulator is analyzed systematically. Especially, the index to evaluate the rotational capability of the manipulator is defined and discussed in detail. The proposed manipulator has a wide application in the fields of industrial robots, simulators, micro-motion manipulators, and parallel kinematics machines.
Singularity analysis and avoidance for an SSRMS-type reconfigurable space manipulator with a non-spherical wrist and two lockable passive telescopic links

Zhiyuan ZHAO,Xiaohang YANG,Yuntao LI,Zichun XU,Jingdong ZHAO,Hong LIU

DOI: https://doi.org/10.1016/j.cja.2024.01.014

IF: 5.7

2024-02-02

Chinese Journal of Aeronautics

Abstract:This study focuses on addressing kinematic singularity analysis and avoidance issues for a space station remote manipulator system (SSRMS)-type reconfigurable space manipulator. The manipulator is equipped with a non-spherical wrist and two lockable passive telescopic links (LPTLs), which enable it to have both active revolute and passive prismatic joints and operate in two distinct modes. To begin with the kinematic singularity analysis, the study derives the differential kinematic equations for the manipulator and identifies the dominant Jacobian matrix that causes singularities. Subsequently, an in-depth analysis of singularities from multiple perspectives is conducted. Firstly, a kinematic singularity map method is proposed to capture the distribution of singularities within the reachable workspace. Then, the influence of the two LPTLs on singularities is thoroughly examined. Finally, a new method based on the matrix rank equivalence principle is introduced to determine singularity conditions, enabling the identification of all the singular configurations for the SSRMS-type reconfigurable manipulator. Notably, this method significantly reduces computational complexity, and the singularity conditions obtained have more concise equations. For the singularity avoidance problem, a novel method is developed, which simultaneously addresses the requirements of real-time performance, high precision, and the avoidance of both kinematic singularities and joint limit constraints. Benefiting from these excellent properties, the proposed method can effectively resolve the singularity issues encountered separately by the SSRMS-type reconfigurable manipulator in its two operational modes. Several typical simulations validate the utility of all the proposed methods.

engineering, aerospace
Singularity Analysis of a New 3-DOF Parallel Mechanism for a Parallel Kinematics Machine

陈继刚,刘辛军

DOI: https://doi.org/10.3969/j.issn.1006-2343.2004.04.005

2004-01-01

Abstract:The singularity of a new spatial 3-degree-of-freedom(3-DoF)parallel mechanism,which can be used in a parallel kinematics machine,is studied.The mechanism consists of a base plate,a moving platform and three legs that connect the aforementioned two platforms.The moving platform has three DoFs,which are two translations and one rotation,with respect to the base.In this structure,only single-DoF joints are involved.One of the advantages of the mechanism is its high rotational capability.The singularity is analyzed in detail.The analysis is very useful for the investigation on workspace and rotational capability and control issue.The new mechanism can not only be used in the design of a parallel kinematics machine,but be applied to industrial robots,simulators and micro-manipulators as well.
Workspace and rotational capability analysis of a spatial 3-DoF parallel manipulator*

Xinjun Liu,Jinsong Wang,Qiming Wang,Tiemin Li

DOI: https://doi.org/10.1080/10020070412331344691

2004-01-01

Abstract:The analysis on the workspace and rotational capability of HANA, a spatial 3-DoF parallel manipulator, is concerned. The parallel manipulator consists of a base plate, a movable platform, and three connecting legs. The moving platform has three degrees of freedom (DoFs) which are two translations and one rotation, with respect to the base plate. The new parallel manipulator is very interesting for the reason of no singularity in the workspace, the single-DoF joint architecture and high rotational capability of the moving platform. The inverse kinematics problem is described in a closed-form, which is very useful to present the workspace geometrically. The constant-orientation and reachable workspaces for the manipulator are analyzed firstly. The index that is used to evaluate the rotational capability of the manipulator is defined and discussed in detail. Finally, the distribution of rotational capability index on the workspace is presented, which helps us know how much the index is at different point. The parallel manipulator has wide application in the fields of industrial robots, simulators, micro-motion manipulators, and parallel kinematics machines.
Analysis of Singular Configuration of Robotic Manipulators

Xinglei Zhang,Binghui Fan,Chuanjiang Wang,Xiaolin Cheng

DOI: https://doi.org/10.3390/electronics10182189

IF: 2.9

2021-09-07

Electronics

Abstract:Robotic manipulators inevitably encounter singular configurations in the process of movement, which seriously affects their performance. Therefore, the identification of singular configurations is extremely important. However, serial manipulators that do not meet the Pieper criterion cannot obtain singular configurations through analytical methods. A joint angle parameterization method, used to obtain singular configurations, is here creatively proposed. First, an analytical method based on the Jacobian determinant and the proposed method were utilized to obtain their respective singular configurations of the Stanford manipulator. The singular configurations obtained through the two methods were consistent, which suggests that the proposed method can obtain singular configurations correctly. Then, the proposed method was applied to a seven-degree-of-freedom (7-DOF) serial manipulator and a planar 5R parallel manipulator. Finally, the correctness of the singular configurations of the 7-DOF serial manipulator was verified through the shape of the end-effector velocity ellipsoid, the value of the determinant, the value of the condition number, and the value of the manipulability measure. The correctness of singular configurations of the planar 5R parallel manipulator was verified through the value of the determinant, the value of the condition number, and the value of the manipulability measure.

engineering, electrical & electronic,computer science, information systems,physics, applied
Workspace and Singularity Analysis of a Novel Parallel M Achine Tool

唐晓强,汪劲松,段广洪,朱煜

DOI: https://doi.org/10.3321/j.issn:1004-132x.2002.10.003

2002-01-01

Abstract:In this paper, a novel planar three degrees of freedom parallel machine tool is proposed. Closed-form solutions are developed for the inverse kinematics. Two types of singularity about the machine tool are studied. Based on the formulation of position workspace and orientation workspace, the effects of the design parameters on the dexterity and workspace are discussed. The analysis results in this paper can be of great help in designing, trajectory planning and control of the same type machine tool.

Analysis of the Singularity Space of the Parallel Manipulator

Analysis of the Singularity of Spatial Parallel Manipulator with Terminal Constraints

Position, Singularity and Workspace Analysis of 3-Psr-o Spatial Parallel Manipulator

Singularity analysis of a new parallel manipulator with revolute actuators

Singularity Analysis of the HALF Parallel Manipulator with Revolute Actuators

A New Approach for Singularity Analysis and Closeness Measurement to Singularities of Parallel Manipulators

Singularity Analysis of Lower-Mobility Parallel Manipulators Using Grassmann-Cayley Algebra

The Free Mobility of a Parallel Manipulator

Singularity Analysis of the Planar 3-RRR Parallel Manipulator Considering the Motion/Force Transmissibility

Workspace and Singularity Analysis of a 3-DOF Planar Parallel Manipulator with Actuation Redundancy

Singularity analysis and detection of 6-UCU parallel manipulator

Screw Theory Based Singularity Analysis of Lower-Mobility Parallel Robots Considering the Motion/Force Transmissibility and Constrainability

A singularity handling algorithm based on operational space control for six-degree-of-freedom anthropomorphic manipulators

On the Analysis of a New Spatial Three-Degrees-of-freedom Parallel Manipulator

HANA: a novel spatial parallel manipulator with one rotational and two translational degrees of freedom

Singularity analysis and avoidance for an SSRMS-type reconfigurable space manipulator with a non-spherical wrist and two lockable passive telescopic links

Singularity Analysis of a New 3-DOF Parallel Mechanism for a Parallel Kinematics Machine

Workspace and rotational capability analysis of a spatial 3-DoF parallel manipulator*

Analysis of Singular Configuration of Robotic Manipulators

Workspace and Singularity Analysis of a Novel Parallel M Achine Tool