Abstract:Neutrino Factories and Muon Colliders' cooling lattices require both high gradient rf and strong focusing solenoids. Experiments have shown that there may be serious problems operating rf in the required magnetic fields. The use of high pressure gas to avoid these problems is discussed, including possible loss problems from electron and ion production by the passage of an ionizing beam. It is also noted that high pressure gas cannot be used in later stages of cooling for a muon collider. Experimental observations using vacuum rf cavities in magnetic fields are discussed, current published models of breakdown with and without magnetic fields are summarized, and some of their predictions compared with observations. A new theory of magnetic field dependent breakdown is presented. It is proposed that electrons emitted by field emission on asperities on one side of a cavity are focused by the magnetic field to the other side where they melt the cavity surface in small spots. Metal is then electrostatically drawn from the molten spots, becomes vaporized and ionized by field emission from the remaining damage and cause breakdown. The theory is fitted to existing 805 MHz data and predictions are made for performance at 201 MHz. The model predicts breakdown gradients significantly below those specified for either the International Scoping Study (ISS) Neutrino Factory or a Muon Collider. Possible solutions to these problems are discussed, including designs for `magnetically insulated rf' in which the cavity walls are designed to be parallel to a chosen magnetic field contour line and consequently damage from field emission is suppressed. An experimental program to study these problems and their possible solution is outlined.

Field Emission Study of RF Cavity in Static Magnetic Field

rf breakdown with external magnetic fields in 201 and 805 MHz cavities

Researches On The Electromagnetic Field In Rf Superconducting Cavities

Simulation of RF Cavity Dark Current in Presence of Helical Magnetic Field

rf Breakdown with and without External Magnetic Fields

Magnetic Flux Dynamics in Horizontally Cooled Superconducting Cavities

Investigations of surface quality and SRF cavity performance

Efficient expulsion of magnetic flux in superconducting RF cavities for high $Q_0$ applications

Magnetic and Cryogenic Design of MICE Coupling Solenoid Magnet System

Rf Optimization and Analysis of the 805-Mhz Cavity for the Mucool Program Using Ace3p

Discussion Session Joint with WG4: Updates on the Front End Specification (if Any) and Endorsement: RF Cavity Breakdown in External Magnetic Field

Research on Field Emission and Dark Current in ILC Cavities

Sensitivity of Niobium Superconducting Cavities to Trapped Magnetic Flux Dissipation

Lower Critical Field Measurement System based on Third-Harmonic Method for Superconducting RF Materials

A Simple Ferromagnetic Circuit for A Solenoid Lens

Magneto-Mechanical Coupling Analysis of a Superconducting Solenoid Magnet in Self-Magnetic Field

Study on Helium Gas Bubble Levitation in High Field Superconducting Magnet

805 MHz and 201 MHz RF Cavity Development for MUCOOL

RF Issues for Muon Ionisation Cooling Channels

The Mechanical and Thermal Design for the Mice Coupling Solenoid Magnet

Direct current magnetic Hall probe technique for measurement of field penetration in thin film superconductors for superconducting radio frequency resonators