Abstract:To remove the aldehydes from tobacco smoke by activated carbon used in a cigarette filter,the effects of activated carbon surface area,particle size,pore size and distribution,and surface chemistry have been systematically evaluated for the filtration of aldehydes in mainstream cigarette smoke.A puff-by-puff analysis on selected aldehydes was also carried out to further illustrate the dynamic interaction between activated carbon and the smoke vapours.The aldehydes in smoke of cigarette with filter containing an amine functionalised ion exchange resin,Diaion(R) CR20,was determined to explore the effect of surface chemistry further.The results showed that:Firstly,a change in the activated carbon particle size distribution from 500-600 to 300-400 m,resulted in a small improvement in the filtration performance.Secondly,an increase in activated carbon micropore volume and surface area resulted (with the exception of acetaldehyde) in a higher aldehyde filtration efficiency.Thirdly,the filtration efficiency was further improved using a combination of micropores and mesopores (transport pores).Fourthly,the activated carbon surface chemistry was modified by increasing the nitrogen content through a synthesis with ethlenediamine,which resulted in an improvement in the selectivity of formaldehyde from the cigarette smoke; this was independent of the porosity,implying that chemisorption played a significant role in addition to physisorption.Fifthly,the position of the activated carbon in the cigarette filter (at a constant weight of 60 mg) showed a small improvement in the aldehyde filtration efficiency under ISO smoking conditions as the activated carbon loading per unit length in the filter rod was increased from 2.5 to 5.0 mg/mm.However under a more intensive smoking regime,there was no observable difference in the filtration efficiency.Finally,an amine functionalised CR20 showed a greater selectivity than that of activated carbon, showing the importance of both physisorption and chemisorption mechanisms in minimizing mainstream smoke aldehyde yields.

Enhanced Adsorption of Toxic Compounds from Cigarette Mainstream Smoke by the Al-Ca-SiO<sub>2</sub> Composite Material

Enhanced Adsorption of Toxic Compounds from Cigarette Mainstream Smoke by the Al-Ca-SiO<sub>2</sub> Composite Material

Synthesis of Si/O/C/N Quaternary Composite Aerogels with Micro/mesoporous Structures and Their Selective Adsorption Property for Volatile Carbonyl Compounds in Cigarette Smoke

Preparation of Self-Modeling Composite Material and Its Selective Adsorption Towards Crotonaldehyde in Mainstream Cigarette Smoke

Selective Adsorption of Poisonous Components from Cigarette Smoke by Use of Nanometer Silicon Dioxide

Advanced Materials Design for Adsorption of Toxic Substances in Cigarette Smoke

Selective Reduction of Harmful Components in Cigarette Smoke with Hydrophobic Nanometer Silicon Dioxide

A Systematic Improvement in Filtration Efficiency of Aldehydes in Mainstream Cigarette Smoke

The application of the composite porous materials to reduce the harmful compounds in mainstream smoke

Significant Removal of Harmful Compounds in Mainstream Cigarette Smoke Using Carbon Nanotubes Mixture Prepared by Catalytic Pyrolysis

Research Progress of Porous Materials in Reducing Seven Harmful gases in Cigarette Smoke

Hierarchical Composites to Reduce N-Nitrosamines in Cigarette Smoke

Study on Amberlite IRC748 Chelating Transition Metal Ions for Reducing Hydrocyanic Acid in Cigarette Smoke

Cerium-Doped Microporous-Mesoporous Silica Composite: Synthesis, Characterization, and Ammonia Adsorption

Adsorbing 1, 3-Butadiene and Benzene by Porous Materials in Gas Stream and Cigarette Smoke

Applying Heterogeneous Catalysis to Health Care: in Situ Elimination of Tobacco-Specific Nitrosamines (tsnas) in Smoke by Molecular Sieves

Selective reduction of HCN and phenol in mainstream cigarette smoke using metal-doped oxide material with porous structure

Effect of preparation methods of activated carbons on the cigarette smoke adsorption

Preparation of Cellulose Acetate/Nano-SiO2 Composites and Their Application in Filtration of Cigarette Smoke

Ultrahigh Adsorption of Toxic Substances from Cigarette Smoke Using Nanocellulose-SiO2 Hybrid Aerogels

Chitosan Removes Toxic Heavy Metal Ions from Cigarette Mainstream Smoke

Enhanced Adsorption of Toxic Compounds from Cigarette Mainstream Smoke by the Al-Ca-SiO&lt;sub&gt;2&lt;/sub&gt; Composite Material

Enhanced Adsorption of Toxic Compounds from Cigarette Mainstream Smoke by the Al-Ca-SiO<sub>2</sub> Composite Material

Synthesis of Si/O/C/N Quaternary Composite Aerogels with Micro/mesoporous Structures and Their Selective Adsorption Property for Volatile Carbonyl Compounds in Cigarette Smoke

Preparation of Self-Modeling Composite Material and Its Selective Adsorption Towards Crotonaldehyde in Mainstream Cigarette Smoke

Selective Adsorption of Poisonous Components from Cigarette Smoke by Use of Nanometer Silicon Dioxide

Advanced Materials Design for Adsorption of Toxic Substances in Cigarette Smoke

Selective Reduction of Harmful Components in Cigarette Smoke with Hydrophobic Nanometer Silicon Dioxide

A Systematic Improvement in Filtration Efficiency of Aldehydes in Mainstream Cigarette Smoke

The application of the composite porous materials to reduce the harmful compounds in mainstream smoke

Significant Removal of Harmful Compounds in Mainstream Cigarette Smoke Using Carbon Nanotubes Mixture Prepared by Catalytic Pyrolysis

Research Progress of Porous Materials in Reducing Seven Harmful gases in Cigarette Smoke

Hierarchical Composites to Reduce N-Nitrosamines in Cigarette Smoke

Study on Amberlite IRC748 Chelating Transition Metal Ions for Reducing Hydrocyanic Acid in Cigarette Smoke

Cerium-Doped Microporous-Mesoporous Silica Composite: Synthesis, Characterization, and Ammonia Adsorption

Adsorbing 1, 3-Butadiene and Benzene by Porous Materials in Gas Stream and Cigarette Smoke

Applying Heterogeneous Catalysis to Health Care: in Situ Elimination of Tobacco-Specific Nitrosamines (tsnas) in Smoke by Molecular Sieves

Selective reduction of HCN and phenol in mainstream cigarette smoke using metal-doped oxide material with porous structure

Effect of preparation methods of activated carbons on the cigarette smoke adsorption

Preparation of Cellulose Acetate/Nano-SiO2 Composites and Their Application in Filtration of Cigarette Smoke

Ultrahigh Adsorption of Toxic Substances from Cigarette Smoke Using Nanocellulose-SiO2 Hybrid Aerogels

Chitosan Removes Toxic Heavy Metal Ions from Cigarette Mainstream Smoke

Enhanced Adsorption of Toxic Compounds from Cigarette Mainstream Smoke by the Al-Ca-SiO<sub>2</sub> Composite Material