Abstract:Municipal solid waste circulating fluidized bed incineration (MSWCFBI) fly ash was a hazardous waste, maintaining challenges for disposal. One effective approach was stabilizing the toxic heavy metal ions in the fly ash structures in situ. This work proposed a fusion–hydrothermal method, including fusion pretreatment in nitrogen atmosphere and microwave-assisted hydrothermal process, to treat three MSWCFBI fly ash samples. Specifically, leaching tests were performed to demonstrate the heavy metal stabilization. Through the treatment of the fusion–hydrothermal process, the concentrations of Cd, Cu, Zn, Pb, Ni, and Cr ions leaching from the fly ashes were obviously less than those of the raw fly ash and the sample only treated by hydrothermal process. Meanwhile, the heavy metal ions migrating from the fly ash to the hydrothermal residual liquid were reduced. Importantly, lots of zeolites formed during the fusion–hydrothermal process, such as to bermorite and sodalite. The fusion pretreatment significantly facilitated the conversion of quartz into amorphous silicon and silicate salts. Then, the silicon dissolution was accelerated and zeolite formation was promoted. Eventually, the heavy metal ions could be trapped in zeolite frameworks, enhancing the stabilization of heavy metal. Moreover, the cation-exchange capability values of the three treated fly ash were 1.099, 1.168, and 1.188 meq g−1, two-folder larger than those of the samples only treated by hydrothermal process. In summary, the fusion–hydrothermal method could facilitate the stabilization of heavy metal ions in the fly ash and the as-obtained solid product with high content of zeolite was promising for future applications.

Leaching Behaviors of Heavy Metals in MSWI Fly Ash and the Immobilization Mechanism of Cement

Stabilization of Heavy Metals in Municipal Solid Waste Circulating Fluidized Bed Incineration Fly Ash by Fusion–hydrothermal Method

Leaching Behavior of Heavy Metals from Municipal Solid Wastes Incineration (MSWI) Fly Ash Used in Concrete.

Leaching of Heavy Metals from MSWI Fly Ash: Experiments Vs. Simulation

Characteristics of the cement-solidified municipal solid waste incineration fly ash

Study on leaching properties and immobilization of municipal solid waste incineration fly ash

Safety Assessment for Municipal Solid Wastes Incineration Fly Ashes-Cement Solidification Body

Immobilization mechanisms of cr and pb in cement solidified municipal solid waste incineration fly ash

Leaching Characteristics of Heavy Metals During Cement Stabilization of Fly Ash from Municipal Solid Waste Incinerators

The Effects of Water Washing on Cement-Based Stabilization of Mwsi Fly Ash

Experimental Study on Properties and Cement Solidification of Municipal Solid Waste Incineration Fly Ash

Immobilization Mechanism of Heavy Metals by Crystals and Liquid Phase During Melting Treatment of MSWI Fly Ash

Characteristics of municipal solid waste incineration fly ash with cement solidification treatment

Speciation and Leaching Characteristics of Heavy Metals from Municipal Solid Waste Incineration Fly Ash

Chemical stabilization of MSW incinerator fly ashes.

Comparison and mechanism analysis of MgO, CaO, and Portland cement for immobilization of heavy metals in MSWI fly ash

Leaching behavior and comprehensive toxicity evaluation of heavy metals in MSWI fly ash from grate and fluidized bed incinerators using various leaching methods: A comparative study

SAFETY OF MSWI FLY ASH AS A COMPONENT OF COMPOSITE CEMENTITIOUS MATERIALS

Intermediate-calcium Based Cementitious Materials Prepared by MSWI Fly Ash and Other Solid Wastes: Hydration Characteristics and Heavy Metals Solidification Behavior

Smelting disposal of municipal solid waste incineration fly ash

Effect of Additive and Washing Pre-treatment on Heavy Metal Vaporization During Sintering Process of MSWI Fly Ash