Abstract:The preparation of concrete materials using carbonated steel slag through the slurry carbonation process is an effective method to overcome environmental problems caused by steel slag stacking and CO2 emissions. However, the relationship between material properties and CO2 sequestration efficiency has not been extensively investigated. In this study, we thoroughly investigated the property-intensifying mechanism of cement-based materials after doping with carbonated steel slag. The compressive strength, water adsorption, and soundness changes were analyzed under different conditions. Moreover, a quantitative model of the relationship between the material properties and influencing factors was analyzed by the response surface methodology (RSM). The block compressive strength and water absorption increased as the steel slag carbonation degree and curing duration increased. In addition, the soundness increased as the steel slag carbonation degree and L/S ratio increased. The compressive strength increased from 47.51 to 69.24 MPa, the water absorption increased from 0.15 to 0.27 g H2O/g solid, and the soundness decreased from ± 4 to ± 1 mm when the steel slag carbonation degree increased from 3 to 7 pct to 23 to 27 pct and the S/C ratio, L/S ratio, and curing duration were 0.11, 0.20 L/kg, and 28 days, respectively. The response surface methodology (RSM) results show that the theoretical maximum compressive strength was 75.85 MPa at a steel slag carbonation degree of 34.53 pct, L/S ratio of 0.15 L/kg, S/C ratio of 0.04, and curing duration of 70 days. The strategy of improving cement material properties by doping carbonate steel slag through the slurry carbonation process is demonstrated to be feasible, which broadens the collaborative horizon of CO2 sequestration and resourceful steel slag disposal.

RADAR-WAVE ABSORBING PROPERTY OF CEMENT-BASED COMPOSITE DOPED WITH STEEL SLAG

Simultaneously enhanced mechanical and electromagnetic interference shielding properties of steel slag-recycled carbon fiber cementitious composites via wet-grinding process

The Electromagnetic Wave Absorption Performance and Mechanical Properties of Cement-Based Composite Material Mixed with Functional Aggregates with High Fe2O3 and SiC

Electromagnetic wave absorption properties of cement based composites using helical carbon fibers as absorbent

Synergy of micron graphite and fly ash for alkali-activated cementitious material: Electromagnetic absorption characteristics and mechanism

Mechanical properties and electromagnetic wave absorption characteristics of solid waste low-carbon cementitious materials

Electromagnetic wave absorption of multifunctional cementitious composites incorporating polyvinyl alcohol (PVA) fibers and fly ash: Effects of microstructure and hydration

Research on the Electromagnetic Wave Absorbing Properties of Carbon Nanotube-Fiber Reinforced Cementitious Composite

Effect of Carbonation Treatment on the Strength and CO2 Uptake Rate of Composite Cementitious Material with a High Steel Slag Powder Content

Environmental, economic and engineering performances of aqueous carbonated steel slag powders as alternative material in cement pastes: Influence of particle size

Research on mechanical and electromagnetic shielding properties of cement paste with different contents of fly ash and slag

Coal gasification fine slag doped with Fe3O4: High-performance electromagnetic-wave absorbers

Effects of Quartz Sand on the Electromagnetic Wave Absorption of Cementitious Materials

Cu9S5/coal gasification fine slag composites for electromagnetic wave absorption using compositional synergies and interface engineering strategies

Electromagnetic wave absorption performance of UHPC incorporated with carbon black and carbon fiber

Graphite-enhanced foam cement-based materials: Mechanical properties, pore structure and electromagnetic wave absorption performance

Effect of C12A7 in Steel Slag on the Early-Age Hydration of Cement

Influence of Steel Slag on Mechanical Properties and Durability of Concrete

Material Properties of Cement Doped with Carbonated Steel Slag Through the Slurry Carbonation Process: Effect and Quantitative Model

The excellent electromagnetic wave absorbing properties of carbon fiber composites: the effect of metal content

Microwave Absorption Ability of Steel Slag and Road Performance of Asphalt Mixtures Incorporating Steel Slag