Abstract:Under extreme working conditions such as high-speed driving on roads with a large road surface unevenness coefficient, turning on a road with a low road surface adhesion coefficient, and emergency acceleration and braking, a vehicle’s stability deteriorates sharply and reduces ride comfort. There is extensive existing research on vehicle active suspension control, trajectory tracking, and control methods. However, most of these studies focus on conventional operating conditions, while vehicle stability analysis under extreme operating conditions is much less studied. In order to improve the stability of the whole vehicle under extreme operating conditions, this paper investigates the stability of a vehicle under extreme operating conditions based on linear quadratic regulator (LQR) control. First, a seven degrees of freedom (7-DOF) dynamics model of the whole vehicle is established based on the use of electromagnetic active suspension, and then an LQR controller of the electromagnetic active suspension is designed. A joint simulation platform incorporating MATLAB and CarSim was built, and the CarSim model is verified by real vehicle tests. Finally, the stability of the vehicle under four different ultimate operating conditions was analyzed. The simulation results show that the root mean square (RMS) values of body droop acceleration and pitch angle acceleration are improved by 57.48% and 28.81%, respectively, under high-speed driving conditions on Class C roads. Under the double-shift condition with a low adhesion coefficient, the RMS values of body droop acceleration, pitch acceleration, and roll angle acceleration are improved by 58.25%, 55.41%, and 31.39%, respectively. These results indicate that electromagnetic active suspension can significantly improve vehicle stability and reduce driving risk under extreme working conditions when combined with an LQR controller.

LQR Method for Vehicle Yaw Moment Decision in Vehicle Stability Control

Optimal allocation of tire force based on vehicle stability

Vehicle stability control based on phase-plane method

Vehicle Yaw Stability Control Using the Fuzzy-Logic Controller

Vehicle Stability Analysis under Extreme Operating Conditions Based on LQR Control

A novel vehicle dynamics stability control algorithm based on the hierarchical strategy with constrain of nonlinear tyre forces

LQR control scheme for active vehicle suspension systems based on modal decomposition

Vehicle Direct Yaw Moment Control Based On Tire Cornering Stiffness Estimation

Research on Stability Control Algorithm of Distributed Drive Bus under High-Speed Conditions

Vehicle Stability Direct Yaw Moment Fuzzy Control Based on Virtual Prototyping

Active LQR Multi-Axle-Steering Method for Improving Maneuverability and Stability of Multi-Trailer Articulated Heavy Vehicles

Linear Subsystem Model for Real-time Control of Vehicle Stability Control System

Integrated stability control for a vehicle in the vehicle-to-grid system on low adhesion coefficient road

A novel pre-control method of vehicle dynamics stability based on critical stable velocity during transient steering maneuvering

Fuzzy Logic Based Control of the Lateral Stability of Tractor Semitrailer Vehicle

Model-Based Vehicle Stability Control with Tyre Force and Instantaneous Cornering Stiffness Estimation

Robust Vehicle Yaw Stability Controlby Active Front Steering with Active Disturbance Rejection Controller

Coordinated control of yaw and roll stability in heavy vehicles considering dynamic safety requirements

Modeling and analysis of vehicle stability region based on Lyapunov and coordinated control

Integrated Vehicle Chassis Control Based on Direct Yaw Moment, Active Steering and Active Stabiliser

Steering collision avoidance and lateral stability coordinated control based on vehicle lateral stability region