Abstract:In this paper, a heuristic approach to doubly fed induction generator (DFIG) protection and low voltage ride through (LVRT) is carried out. DFIG-based wind systems are rapidly penetrating the power generation section. Despite their advantages, their direct coupling grid makes them highly sensitive to symmetrical faults. A well-known solution to this is the crowbar method of DFIG protection. This paper provides a method to determine the optimal crowbar resistance value, to ensure a strong trade-off between the rotor current and DC voltage transients. Further, since the crowbar method requires disconnection from the grid, the linear quadratic regulator (LQR) is applied to the system. This is to ensure fault ride through compliance with recent grid code requirements. The well-known PSO, as well as the recently developed African vultures optimization algorithm (AVOA), was applied to the problem. The first set of results show that for severe symmetrical voltage dips, the AVOA provides a good option for crowbar magnitude optimization, whereas PSO performed better for moderately severe dips. Secondly, when the LQR was optimized via the AVOA, it exhibited superiority over the conventional PSO-based PI controller. This superiority was in terms of rotor current transient magnitude, DC voltage transient magnitude, and reactive power steady-state ripple and were in the order of 67.5%, 20.35%, and 37.55%, respectively. When comparing the crowbar method and the LQR, it was observed that despite the LQR exhibiting superiority in terms of transient performance, the crowbar method offered a unanimously superior settling time.

Short Circuit Current Characteristics of Doubly Fed Induction Generator with Crowbar Protection under Different Voltage Dips

Short Circuit Current Analysis of DFIG Wind Turbines with Crowbar Protection

Analysis of the By-Pass Resistance of an Active Crowbar for Doubly-Fed Induction Generator Based Wind Turbines under Grid Faults

Short Circuit Current Analysis Of Dfig-Type Wg With Crowbar Protection Under Grid Faults

Short Circuit Current Analysis for DFIG-based Wind Generation System with Crowbar Protection under Grid Faults

Model parameter identification of DFIG based on short circuit current

A Novel Control Strategy of an Active Crowbar for DFIG-based Wind Turbine During Grid Faults

Control of Doubly-Fed Induction Generator to Ride-Through Recurring Grid Faults

Modeling and Analysis of Transient Reactive Power Characteristics of DFIG Considering Crowbar Circuit under Ultra HVDC Commutation Failure

Studies on Electromagnetic Characteristics of DFIG under Short-Circuit Faults of the Grid

Study on LVRT of DFIG Wind Power System Based on Crowbar Protection Circuit

Crowbar Control Strategy for Doubly Fed Induction Generator of Wind Farm During Power Grid Voltage Dips

Improved Crowbar Control Strategy of DFIG Based Wind Turbines for Grid Fault Ride-Through

Research on Short-Circuit Current Calculation Method of Doubly-Fed Wind Turbines Considering Rotor Dynamic Process

Optimal Design of Crowbar Resistance for DFIG Converter During Low Voltage Ride-through

Crowbar hardware design enhancement for fault ride through capability in doubly fed induction generator-based wind turbines

Fault Ride-Through Analysis and Protection of A 2-Mw Dfig Tidal Current Turbine

Improved Control Strategy of an Active Crowbar for Directly-Driven PM Wind Generation System under Grid Voltage Dips

Protection of rotor side converter of doubly fed induction generator based wind energy conversion system under symmetrical grid voltage fluctuations

Analysis on the operation of crowbar in doubly fed induction generators

A Heuristic Approach to Optimal Crowbar Setting and Low Voltage Ride through of a Doubly Fed Induction Generator