Abstract:A fishhook vector bending sensor (FV) is demonstrated based on the Mach-Zehnder interference (MZI) principle. The sensor is composite of a dual up-taper optical sphere array (DUOS) and an axial offset splice region (AO), which is fabricated on a polarization maintaining fiber (PMF) using two special arc fusion processes. Due to the overall non-uniform symmetry of the combined structure, the regions in the mutually symmetric direction are subjected to forces in opposite directions when bending. The feasibility of DUOS-FV-MZI for space vector curvature (horizontal and vertical curvature) is confirmed by finite element analysis (FEA) and experiments. In particular, a spatial light polarization system can equivalently replace this vector-type sensor with a tiny size, and several specific incident polarization angles (0°, 45°, 90°) are chosen to develop a detailed vector bending sensing. The experimental results show that maximum bending sensing sensitivity can reach 8.681 ± 0.012 nm/m−1. Besides, the structure shows a significant change in light intensity when the incident polarization angle is 45°, consistent with the theoretical analysis. Combining with a differential integration demodulation method can enhance the light intensity-modulation response, the max curve sensitivity can reach 285.04 ± 0.41 dB/m−1. Consequently, this polarization related type device integrates wavelength-sensitive and light-intensity-sensitive sensing functions. In addition, the advantages of low-temperature crosstalk and high structural stability make it suitable for flexible wearable, micro-deformation civil engineering measurements.

Fissure-like Vector Curve Type Composite Sensor Based on Polarization Mode Interference

Self-assembling Vectorial Curvature Sensing System Based on a Single Helix of Polarization Maintaining Fiber

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

High Sensitivity I-beam Shaped Polarization Related Vector Curvature Sensor with Optical Intensity Modulation

Highly Compact Vector Bending Sensor With Microfiber-Assisted Mach– Zehnder Interferometer

Compact Robust Vector Bending Sensor Based on Single Stress-Applying Fiber

Fabry-Perot Vector Curvature Sensor Based on Cavity Length Demodulation

Micro-Bending Vector Sensor Based on Six-Air-Hole Grapefruit Microstructure Fiber Using Lateral Offset Splicing

An Inline Fiber Curvature Sensor Based on Eccentric Core Fiber and Off-Axis Air Cavity Fabry-Pérot Interferometer

High-performance vector torsion sensor based on high polarization-dependent in-fiber Mach-Zehnder interferometer.

Research and Assessment of High Sensitivity Intensity Modulation Vector Curvature Sensor Based on Cascaded Bamboo-Joint Microcavity Structure

Self-Assembled Vector Curvature Sensor Based on Vernier Effect

Self-Assembled Highly Sensitive Hybrid Structure Sensor for Vector Curvature and Temperature Measurement

Parallel Farby–Perot Interferometers in an Etched Multicore Fiber for Vector Bending Measurements

A Vector Bending Sensor Based on a Core-Offset Long Period Fiber Grating Induced by an Arc-Discharge

Compact omnidirectional multicore fiber-based vector bending sensor

An In-Fiber Mach-Zehnder Interferometer Based on Dual Side-Hole Fiber for Highly Sensitive Measurement of Curvature

Highly Sensitive Vector Bending Sensor Based on an Embedded Multimode D-shaped LPFG.

Temperature-insensitive vector curvature sensor based on four-core fiber offset structure

Two-Dimension Vector Bending Sensor Based on Helical Long-Period Gratings in Four-core Fiber

Vernier Effect Based Fabry-Perot Interferometer Sensing Structure for Vector Curvature Measurement