Abstract:Copolymerization of acrylonitrile (AN) and maleic anhydride was conducted by a water-phase precipitation copolymerization process (WPPCP) with K2S2O8–Na2SO3 as initiator system and the resultant copolymers were used to fabricate ultrafiltration hollow fiber membranes (UHFMs) by a dry–wet phase inversion method. Structures and properties for the UHFMs were studied by the analysis of scanning electron microscopy and the measurements of water permeation, bovine serum albumin (BSA) rejection and breaking strength. Compared with normal solution copolymerization, only poly(acrylonitrile-co-maleic acid)s (PANCMAs) could be obtained with WPPCP due to the hydrolysis of maleic anhydride, however, advantages of WPPCP including high monomer conversion and high copolymer molecular weight were obtained. It was found that increasing the molecular weight of PANCMA or the concentration of casting solution raised BSA rejection and mechanical strength but decreased water flux for the corresponding UHFMs. Membrane structures and properties could also be adjusted by adding additives such as poly(vinyl pyrrolidone) and poly(vinyl alcohol) (PVA) to the casting solution. Ternary phase diagrams of the membrane-forming systems and viscosity data of the casting solutions were used to characterize the characteristics of thermodynamics and diffusion kinetics for the membrane-forming systems. Most promisingly, it was found that the acid groups on membrane surface of PANCMA could be conveniently converted to more reactive anhydride groups by treating the membranes with acetic anhydride/pyridine mixture. Finally, the potentiality for the immobilization of poly(ethylene glycol) (PEG) on membrane surface by the reaction of PEG with anhydride groups to further improve the membrane properties was briefly indicated using Fourier-transform infrared spectroscopy (FT-IR), pure water contact angle and BSA adsorption measurements combining water permeation and BSA rejection determinations.

Cytocompatibility of Poly(acrylonitrile-Co-n-vinyl-2-pyrrolidone) Membranes with Human Endothelial Cells and Macrophages

Asymmetric Membranes Fabricated from Poly(acrylonitrile‐co‐n‐vinyl‐2‐pyrrolidone)s with Excellent Biocompatibility

Hemocompatibility of Poly(acrylonitrile-Co-n-vinyl-2-pyrrolidone)s: Swelling Behavior and Water States.

Copolymerization of Acrylonitrile with N-vinyl-2-pyrrolidone to Improve the Hemocompatibility of Polyacrylonitrile

First Results of Hemocompatible Membranes Fabricated from Acrylonitrile Copolymers Containing Sugar Moieties

Acrylonitrile-based Copolymer Membranes Containing Reactive Groups: Effects of Surface-Immobilized Poly(ethylene Glycol)s on Anti-Fouling Properties and Blood Compatibility

Surface Modification of Polyacrylonitrile-Based Membranes by Chemical Reactions to Generate Phospholipid Moieties.

Acrylonitrile-Based Copolymer Membranes Containing Reactive Groups: Surface Modification by the Immobilization of Biomacromolecules

Novel Acrylonitrile-Based Copolymers Containing Phospholipid Moieties: Synthesis and Characterization

Preliminary investigation on hemocompatibility of poly(vinylidene fluoride) membrane grafted with acryloylmorpholine via ATRP.

Tethering Poly(ethylene Glycol)s to Improve the Surface Biocompatibility of Poly(acrylonitrile-Co-maleic Acid) Asymmetric Membranes

Surface Modification of Poly(acrylonitrile-Co-maleic Acid) Membranes by the Immobilization of Poly(ethylene Glycol)

Biomimetic Surface Modification on Polyacrylonitrile-Based Asymmetric Membranes Via Direct Formation of Phospholipid Moieties

SUPPRESSION OF CELL ADHESION ON POLYACRYLONITRILE-BASED MEMBRANES BY THE ANCHORING OF PHOSPHOLIPID MOIETIES

Biocompatibility and Cellular Uptake Mechanisms of Poly(N-Isopropylacrylamide) in Different Cells

Preparation of Electrospun Polyvinyl Alcohol/Nanocellulose Composite Film and Evaluation of Its Biomedical Performance

In Vitro Assessment of Poly-N-Vinylpyrrolidone/Acrylic Acid Nanoparticles Biocompatibility in a Microvascular Endothelium Model

Acrylonitrile-Based Copolymer Membranes Containing Reactive Groups: Surface Modification By The Immobilization Of Poly(Ethylene Glycol) For Improving Antifouling Property And Biocompatibility

Tethering poly (ethylene glycol) s to improve the surface biocompatibility of poly (acrylonitrile-co-maleic acid) asymmetric membranes

Acrylonitrile-based Copolymers Containing Reactive Groups: Synthesis and Preparation of Ultrafiltration Membranes

Surface Engineerings of Polyacrylonitrile-Based Asymmetric Membranes Towards Biomedical Applications: an Overview