Abstract:High entropy alloys (HEAs) have garnered significant attention in recent years, primarily focusing on alloying design and thermal processing. The objective of this study was to investigate the mechanical response of Al0.3CoCrFeNi, a representative HEA, under various stress states, temperatures, and strain rates, aiming to establish its constitutive equation and fracture criteria. Employing a hybrid FEM/EX approach, the constitutive behaviour of the alloy was characterized using the modified Johnson-Cook (MJC) model, while the fracture properties were assessed using the Hosford-Coulomb (HC) equation. Experimental findings highlighted the remarkable tensile strength (578.1 MPa) and ductility (69%) of the as-cast Al0.3CoCrFeNi at room temperature. However, at elevated temperatures ranging from 400 °C to 650 °C, a reduction in ductility was observed, accompanied by serration behaviour. Notably, precipitation hardening was detected at 800 °C, indicative of strengthening through precipitate formation. Additionally, Al0.3CoCrFeNi exhibited significant strain rate sensitivity and a positive strain rate effect, emphasizing its dynamic response under different loading conditions. The accuracy of the constitutive model and fracture criteria was validated through the examination of deformation and fracture modes in Taylor impact tests. The MJC model demonstrated predictions within a 10% deviation from experimental data, while the HC fracture criterion, accounting for stress triaxiality and Lode parameters, effectively predicted shear fracture in the projectiles. Crack formation in the projectiles resulted from a combination of tension and shear, followed by propagation at a 45° angle under combined compression and shear loading. This comprehensive study enhances understanding of the mechanical properties of Al0.3CoCrFeNi, providing valuable insights for its application in engineering, particularly in impact protection.

Investigation of the Thermo-Mechanical Behavior of Neutron-Irradiated Fe-Cr Alloys by Self-Consistent Plasticity Theory

Experiments and Modeling of the Macroscale Mechanical Responses of Neutron-Irradiated FeCrAl Alloys

A Self-Consistent Plasticity Theory for Modeling the Thermo-Mechanical Properties of Irradiated Fcc Metallic Polycrystals

Plasticity in irradiated FeCrAl nanopillars investigated using discrete dislocation dynamics

Modeling phase separation and composition patterning in FeCrAl alloys at neutron irradiation

Mechanical Properties For Irradiated Face-Centred Cubic Nanocrystalline Metals

Constitutive Relationship of Irradiated Metallic Materials by Eshelby Formalism and Micro-Mechanical Scheme

Characterising Ion-Irradiated FeCr: Hardness, Thermal Diffusivity and Lattice Strain

Molecular dynamics simulation of tensile deformation behavior of single-crystal Fe–Cr–Al before and after irradiation

Deformation Behaviour of Ion-Irradiated FeCr: A Nanoindentation Study

In-situ TEM investigation of defect evolution in FeCrAl during post-irradiation annealing

Mechanical Properties of Irradiated Multi-Phase Polycrystalline Bcc Materials

Dose and compositional dependence of irradiation-induced property change in FeCr

Effect of Radiation Dose on the Deformation Behavior of the Single-Crystal Fe–10Ni–20Cr Alloy

Investigation of mechanical behavior, constitutive modeling, and fracture criteria for as-cast Al0.3CoCrFeNi high entropy alloy

Revealing the Temperature-Dependent Hardening Mechanisms of Non-Uniformly Distributed Defects for Ion-Irradiated Metals: Experiments and Modeling

Nanoindentation Experiment and Crystal Plasticity Study on the Mechanical Behavior of Fe-ion-irradiated A508-3 Steel

First-Principles Calculations to Investigate the Influence of Irradiation Defects on the Swelling Behavior of Fe-13Cr Alloys

Effects of Fe-Ions Irradiation on the Microstructure and Mechanical Properties of FeCrAl-1.5wt.% ZrC Alloys

Atomic-Scale Three-Dimensional Irradiation-Induced Defect Kinetics Models for Bcc Fe-Based Alloys