Abstract:Using the Raney Fe-Al alloy as the precursor for Fe and Al, and tetrapropylammonium hydroxide (TPAOH) as both the base for the leaching of the alloy and the template for the synthesis of HZSM-5, we synthesized the skeletal Fe core-HZSM-5 shell catalysts (Raney Fe@HZSM-5) via a facile one-pot hydrothermal strategy. The thickness of the zeolite shell was adjusted by varying the hydrothermal time. The catalysts were characterized by inductively coupled plasma-atomic emission spectroscopy (ICP-AES), N-2 physisorption, X-ray powder diffraction (XRD), temperature-programmed desorption of NH3 (NH3-TPD), and scanning electron microscopy (SEM). It was identified that the Raney Fe-Al alloy was more suitable than the rapidly quenched Fe-Al alloy as the precursor to the skeletal Fe core, since the skeletal Fe catalyst alkali-leached from the former produced more long-chain hydrocarbons during the Fischer-Tropsch synthesis (FTS) reaction for successive cracking and isomerization. A complete HZSM-5 shell was obtained only after above 24 h of hydrothermal treatment. With the hydrothermal time from 2 d to 8 d, the thickness of the compact HZSM-5 shell increased from 1.3 mu m to 9.7 mu m, the relative crystallinity increased steadily, while the SiO2/Al2O3 ratio remained essentially constant, and the amount of the acid sites is parallel to the thickness of the zeolite shell. In the FTS reaction using syngas with the H-2/CO molar ratio of 2 and at 543 and 2.0 MPa, the CO conversion and the selectivity to the gasoline fraction (C-5 similar to C-11 hydrocarbons) evolved in a volcanic trend with the shell thickness, suggesting the existence of an optimal amount of the acid sites, while less or more is adverse to the activity and selectivity to the gasoline fraction. The Raney Fe@HZSM-5 catalyst hydrothermally treated for 4 d exhibited the highest CO conversion of 92% and the selectivity to the gasoline fraction of 71%, along with an iso-paraffin to n-paraffin ratio of 1.9. At the n(H-2)/n(CO) ratio of 1, the selectivity to the gasoline fraction and the iso-paraffin to n-paraffin ratio were further improved to 73% and 2.1, respectively, which shows promise for this catalyst to transform the coal- or biomass-derived syngas to high-octane number gasoline.

Microstructured Al‐fiber@meso‐Al2O3@Fe‐Mn‐K Fischer–Tropsch Catalyst for Lower Olefins

Effective Iron Catalysts Supported on Mixed MgO-Al<sub>2</sub>O<sub>3</sub> for Fischer-Tropsch Synthesis to Olefins

High-Temperature Fischer–Tropsch Synthesis of Light Olefins over Nano-Fe3O4@MnO2 Core–Shell Catalysts

Efficient Fischer-Tropsch to light olefins over iron-based catalyst with low methane selectivity and high olefin/paraffin ratio

An Investigation of Efficient Microstructured Reactor with Monolith Co/anodic Γ-Al2o3/al Catalyst in Fischer-Tropsch Synthesis

High-temperature Fischer–Tropsch Synthesis over the Li-promoted FeMnMgOx Catalysts

One-Pot Solvothermally Synthesized MFe2O4 (M=Fe, Mn, Co, Ni) Microspheres as Catalysts for Fischer-Tropsch to Olefins

Tailoring of Fe/MnK-CNTs Composite Catalysts for the Fischer–Tropsch Synthesis of Lower Olefins from Syngas

MnOx Promotional Effects on Olefins Synthesis Directly from Syngas over Bimetallic Fe‐MnOx/SiO2 Catalysts

Effect of Graphitic Carbon Modification on the Catalytic Performance of Fe@SiO2-GC Catalysts for Forming Lower Olefins Via Fischer-Tropsch Synthesis.

Co3o4-Al2o3 Mesoporous Hollow Spheres As Efficient Catalyst for Fischer-Tropsch Synthesis

Fabrication of K-promoted Iron/carbon Nanotubes Composite Catalysts for the Fischer–Tropsch Synthesis of Lower Olefins

Stabilizing the Active Phase of Iron-Based Fischer–Tropsch Catalysts for Lower Olefins: Mechanism and Strategy

Kinetics Study of Fischer-Tropsch Reaction to Lower Olefins over MnOx-promoted Fe/SiO2 Catalysts

Densely embedded homogeneous FeO x nanoparticles in N-doped carbon frameworks: A 3D scaffold catalyst for high-temperature Fischer-Tropsch synthesis

Efficient Fischer–Tropsch microreactor with innovative aluminizing pretreatment on stainless steel substrate for Co/Al 2 O 3 catalyst coating

Γ-Fe2o3 As the Precursor of Iron Based Catalyst Prepared by Solid-State Reaction at Room Temperature for Fischer-Tropsch to Olefins

Nanostructured Catalyst for Fischer-Tropsch Synthesis: Nanostructured Catalyst for Fischer-Tropsch Synthesis

Novel Cobalt Catalysts Supported On Metal-Organic Frameworks Mil-53(Al) For The Fischer-Tropsch Synthesis

Enhancing the synergism of Fe3O4 and Fe5C2 to improve the process of CO2 hydrogenation to olefines

Effect of Shell Thickness on Skeletal Fe@HZSM-5 Core-Shell Catalysts for Fischer-Tropsch Synthesis