Abstract:The design of a forty-meter long model used to estimate the seismic response of the immersed tunnel of the Hong Kong-Zhuhai-Macau (HZM) bridge engineering is presented. The model was composed of twelve model boxes, four “active” as they were placed on top of four shaking tables, each with a dimension of 4 × 6 m with capacity of 1.5 g. The remaining eight model boxes were “inactive”, as their response was the result of the motions imposed by the active model boxes through the connection between boxes. The design of the connections was deemed critical to accomplish a consistent excitation through the system. Analytical and numerical simulations of the test system were carried out where the model boxes were represented as beams and their connections as rotational springs. In the model, wave passage along the axis of the tunnel was input to the “active” model boxes using a delay equal to the time it would take the seismic wave to travel from one active box to the next along the axis of the tunnel. A series of tests conducted with the boxes verified the design. The in-situ soil, found at the location of the tunnel, was modeled using a synthetic soil formed by an intimate mixture of sawdust and sand with mass proportions 1:2.5, that yielded dynamic properties that, after the similitude ratios used for the design of the system, were analogous to those of the natural soil. The effects of the rigid boundaries imposed by the lateral walls of the model box were investigated by carrying out tests on a single model box, filled with the synthetic soil that reproduced the natural slope of the ground at the location of the tunnel. Readings from accelerometers placed inside the soil during the shaking table tests showed that the effects of the boundaries were negligible. These results were confirmed by two-dimensional plane-strain simulations using a finite element method that replicated the experiments. In summary, analytical, numerical and experiment results consistently showed that the design of the model boxes and the synthetic soil were adequate. The design and tests of the long tunnel model will be presented elsewhere.

Multi-point Shaking Table Test Design for Long Tunnels under Non-Uniform Seismic Loading

Multi-point shaking table test of a long tunnel subjected to non-uniform seismic loadings

Shaking Table Test and Dynamic Response Analysis of Saturated Soil–Submarine Tunnel

Shaking Table Model Test Design for Utility Tunnel

Dynamic Response of Shallow-Buried Small Spacing Tunnel with Asymmetrical Pressure: Shaking Table Testing and Numerical Simulation

The Large-Scale Shaking Table Model Test of the Shallow-Bias Tunnel with a Small Clear Distance

Shaking table test study of a surface frame structure–sand–tunnel system

A large-scale shaking table test for dynamic soil-metro tunnel interaction: Test scheme

Large scale shaking table model test and analysis on seismic response of utility tunnel in non-homogeneous soil

Shaking Table Test on the Seismic Response of a Frame-Type Subway Station in Composite Soil

Shaking table investigations on seismic performance of prefabricated corrugated steel utility tunnels

An analytical model for vibration prediction of a tunnel embedded in a saturated full-space to a harmonic point load

Dynamic Responses of Bridge–Tunnel Overlapping Structure for High-Speed Railway Under Different Seismic Excitations

Shaking Table Test on Seismic Response of Tunnel-Soil Surface Structure System considering Soil-Structure Interaction

1-g shaking table tests of precast horseshoe segmental tunnel: Experimental design, dynamic properties, deformation mode and damage pattern

Shaking table test on shaft-tunnel junction in liquefiable sand site

Shaking table test and numerical simulation on seismic performance of prefabricated corrugated steel utility tunnels on liquefiable ground

Shaking Table Tests for Seismic Response of Oblique Overlapped Tunnel

Numerical Seismic Dynamic Response Analysis of Double-hole Eight-lane Large Section Tunnel

Study on seismic behaviors of a double box utility tunnel with joint connections using shaking table model tests

Simulation analysis of seismic dynamic response of small interval tunnel in deep backfill area based on model test