Recent Progress and Perspective in Solution-Processed Interfacial Materials for Efficient and Stable Polymer and Organometal Perovskite Solar Cells

Chu‐Chen Chueh,Chang‐Zhi Li,Alex K.‐Y. Jen

DOI: https://doi.org/10.1039/c4ee03824j

IF: 32.5

2015-01-01

Energy & Environmental Science

Abstract:The latest developments in solution-processed interfacial layers for polymer and hybrid perovskite solar cells are comprehensively reviewed in this article.

What problem does this paper attempt to address?

Recent Advances in Interface Engineering for Planar Heterojunction Perovskite Solar Cells

Wei Yin,Lijia Pan,Tingbin Yang,Yongye Liang

DOI: https://doi.org/10.3390/molecules21070837

IF: 4.6

2016-01-01

Molecules

Abstract:Organic-inorganic hybrid perovskite solar cells are considered as one of the most promising next-generation solar cells due to their advantages of low-cost precursors, high power conversion efficiency (PCE) and easy of processing. In the past few years, the PCEs have climbed from a few to over 20% for perovskite solar cells. Recent developments demonstrate that perovskite exhibits ambipolar semiconducting characteristics, which allows for the construction of planar heterojunction (PHJ) perovskite solar cells. PHJ perovskite solar cells can avoid the use of high-temperature sintered mesoporous metal oxides, enabling simple processing and the fabrication of flexible and tandem perovskite solar cells. In planar heterojunction materials, hole/electron transport layers are introduced between a perovskite film and the anode/cathode. The hole and electron transporting layers are expected to enhance exciton separation, charge transportation and collection. Further, the supporting layer for the perovskite film not only plays an important role in energy-level alignment, but also affects perovskite film morphology, which have a great effect on device performance. In addition, interfacial layers also affect device stability. In this review, recent progress in interfacial engineering for PHJ perovskite solar cells will be reviewed, especially with the molecular interfacial materials. The supporting interfacial layers for the optimization of perovskite films will be systematically reviewed. Finally, the challenges remaining in perovskite solar cells research will be discussed.
Solution-Processible Conductive Organics For Efficient Polymer And Perovskite Solar Cells

Chang-Zhi Li

DOI: https://doi.org/10.1109/PIERS.2016.7734779

2016-01-01

Abstract:Thin-film solar cells made with polymer and perovskite absorbers represent a transformative technology with great potentials for high-throughput manufacturing at very low cost. Efforts in the design, processing, and engineering of π-conjugated molecule and polymers have enabled significantly enhanced performance and stability of such organic and hybrid electronic devices, through which the light-harvest, exciton dissociation, charge transport, and charge collection at the metal/absorber/metal oxide interfaces can be controlled and tuned [1, 2]. In this talk, the integrative molecular engineering approach conducted in group of combining interface [3], active material [4], and transparent electrode [5, 6] to improve the performance and stability of polymer and hybrid perovskite photovoltaic cells will be discussed. Specific emphasis will be placed on the development of solution-processible conductive organics via a mild n-doping process and their application for interface engineering between semiconductor and electrode interface for developing high-performance and flexible polymer and perovskite hybrid solar cells [8, 9].
Recent Progress in the Solution-Based Sequential Deposition of Planar Perovskite Solar Cells

Markus Becker,Michael Wark

DOI: https://doi.org/10.1021/acs.cgd.8b00686

2018-06-27

Abstract:Hybrid organic–inorganic metal halide perovskites have probably become the most famous and prospective class of materials for photovoltaic application in the past decade. The extremely fast increase of certified power conversion efficiencies, from 3.8 to 22.7% in less than seven years, encourages researchers around the globe and indicates the materials advantageous optoelectronic properties. The most important properties for future commercialization have turned out to be the low cost of precursor materials and the simplicity of solution processability. This article reviews the latest advancements in the solution-based sequential deposition of planar perovskite absorber layers, which show promise to be multifaceted, reproducible, and controllable. Strong research interest has recently been devoted to the optimization of the surface coverage and morphology, both of which considerably influence the photovoltaic performance. Herein, we first concentrate on the deposition of lead-containing precursors from typical polar solvents and review modifications via additive incorporation and pre-/post-treatment. Afterward, innovative methods for the conversion reaction in the usually alcoholic solvent are summarized, and the influence on the final crystal morphology is highlighted. We conclude with a short discussion about future directions and challenges.

chemistry, multidisciplinary,materials science,crystallography
Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells.

Lijian Zuo,Hexia Guo,Dane W deQuilettes,Sarthak Jariwala,Nicholas De Marco,Shiqi Dong,Ryan DeBlock,David S Ginger,Bruce Dunn,Mingkui Wang,Yang Yang

DOI: https://doi.org/10.1126/sciadv.1700106

IF: 13.6

2017-01-01

Science Advances

Abstract:The solution processing of polycrystalline perovskite films introduces trap states that can adversely affect their optoelectronic properties. Motivated by the use of small-molecule surfactants to improve the optoelectronic performance of perovskites, we demonstrate the use of polymers with coordinating groups to improve the performance of solution-processed semiconductor films. The use of these polymer modifiers results in a marked change in the electronic properties of the films, as measured by both carrier dynamics and overall device performance. The devices grown with the polymer poly(4-vinylpyridine) (PVP) show significantly enhanced power conversion efficiency from 16.9 ± 0.7% to 18.8 ± 0.8% (champion efficiency, 20.2%) from a reverse scan and stabilized champion efficiency from 17.5 to 19.1% [under a bias of 0.94 V and AM (air mass) 1.5-G, 1-sun illumination over 30 min] compared to controls without any passivation. Treating the perovskite film with PVP enables a VOC of up to 1.16 V, which is among the best reported for a CH3NH3PbI3 perovskite solar cell and one of the lowest voltage deficits reported for any perovskite to date. In addition, perovskite solar cells treated with PVP show a long shelf lifetime of up to 90 days (retaining 85% of the initial efficiency) and increased by a factor of more than 20 compared to those without any polymer (degrading to 85% after ~4 days). Our work opens up a new class of chemical additives for improving perovskite performance and should pave the way toward improving perovskite solar cells for high efficiency and stability.
Solution Chemistry Engineering toward High-Efficiency Perovskite Solar Cells

Yixin Zhao,Kai Zhu

DOI: https://doi.org/10.1021/jz501983v

IF: 6.888

2014-11-20

The Journal of Physical Chemistry Letters

Abstract:Organic and inorganic hybrid perovskites (e.g., CH3NH3PbI3) have emerged as a revolutionary class of light-absorbing semiconductors that has demonstrated a rapid increase in efficiency within a few years of active research. Controlling perovskite morphology and composition has been found critical to developing high-performance perovskite solar cells. The recent development of solution chemistry engineering has led to fabrication of greater than 15-17%-efficiency solar cells by multiple groups, with the highest certified 17.9% efficiency that has significantly surpassed the best-reported perovskite solar cell by vapor-phase growth. In this Perspective, we review recent progress on solution chemistry engineering processes and various control parameters that are critical to the success of solution growth of high-quality perovskite films. We discuss the importance of understanding the impact of solution-processing parameters and perovskite film architectures on the fundamental charge carrier dynamics in perovskite solar cells. The cost and stability issues of perovskite solar cells will also be discussed.
Interface Engineering in Organic and Organic/Inorganic Hybrid Solar Cells

Jing-qi Xu,Wei-fei Fu,Shi-da Yang,Tang Liu,Chang-zhi Li,Hong-zheng Chen

DOI: https://doi.org/10.11777/j.issn1000-3304.2018.17251

2018-01-01

Abstract:Third generation solar cells including organic solar cells, perovskite solar cells have attracted much attention due to their advantages of low cost, solution processability and flexibility. The rapid progress in this field is attributed to the development of absorbing layers, interfacial materials or interfacial modification, device architectures and so on. Especially, the interfaces in the devices significantly affect the exciton dissociation, charge carrier transport and collection, and subsequently affect the device performance. This review focuses on the interface engineering in organic solar cells, polymer/nanocrystal hybrid solar cells and perovskite solar cells in our group. We summarize the strategies of designing effective interfacial materials including hole-transporting materials, electron-transporting materials and their modification to achieve ohmic contact at the interface of active layer and electrodes. A series of low-temperature solution processed low-cost inorganic materials and organic small molecules are developed. With appropriate energy levels, high mobility and low defect or ability to passivate perovskites, highly efficient organic and perovskite solar cells are achieved. Self-assembly monolayer technologies are also discussed here. It is an efficient way to modify the work function of electrodes to obtain ohmic contact between electrodes and active layer. On one hand, the self-assembly monolayer can also be used to passivate the defect of metal oxide buffer layer such as ZnO or TiO2 to reduce recombination, which may improve the morphology of perovskite film to enhance the performance. Plasmonic effect is introduced to enhance the light absorption of active layer by incorporating Au or Ag nanoparticles into the interface layers. At last, the optimized strategies for interface modification between polymer and nanocrystals to improve the exciton dissociation and charge transport are discussed in details. By attaching benzenedithiol ligands onto the surface of CdSe nanocrystals in the "face-on" geometry, the nanocrystal-nanocrystal or polymer-nanocrystal distance is minimized. Furthermore, the "electroactive" p-orbitals of the benzenedithiol can further enhance the electronic coupling, which facilitates charge carrier dissociation and transport. On the other hand, judicious choice of ligands with appropriate molecular dipoles has a strong impact on chemical and electronic structures at the polymer-nanocrystal interface and subsequently on photovoltaic device performance. With these strategies, highly efficient polymer/CdSe nanocrystal hybrid solar cells have been achieved. A few viewpoints on further developing interface engineering for high-performance solar cells are also provided.
Recent progress and challenges of organometal halide perovskite solar cells

Liyan Yang,Alexander T Barrows,David G Lidzey,Tao Wang

DOI: https://doi.org/10.1088/0034-4885/79/2/026501

2016-01-29

Reports on Progress in Physics

Abstract:We review recent progress in the development of organometal halide perovskite solar cells. We discuss different compounds used to construct perovskite photoactive layers, as well as the optoelectronic properties of this system. The factors that affect the morphology of the perovskite active layer are explored, e.g. material composition, film deposition methods, casting solvent and various post-treatments. Different strategies are reviewed that have recently emerged to prepare high performing perovskite films, creating polycrystalline films having either large or small grain size. Devices that are constructed using meso-superstructured and planar architectures are summarized and the impact of the fabrication process on operational efficiency is discussed. Finally, important research challenges (hysteresis, thermal and moisture instability, mechanical flexibility, as well as the development of lead-free materials) in the development of perovskite solar cells are outlined and their potential solutions are discussed.

physics, multidisciplinary
Interfacial Materials for Efficient Solution Processable Organic Photovoltaic Devices

changzhi li,hinlap yip,alex k y jen

DOI: https://doi.org/10.1007/978-3-662-45509-8_9

2015-01-01

Topics in applied physics

Abstract:The introduction of proper interfacial materials to optimize properties between organic/metal and organic/organic interfaces has become an important criterion to improve the performance and stability of polymer solar cells. This chapter presents an overview on the recent development of effective interfacial materials (including organic, inorganic and hybrid materials) used for both organic/metal and organic donor/acceptor interface engineering, and the integration of these materials in different device architectures to enhance efficiency and stability are also discussed.
Recent advances in the interfacial engineering of organic–inorganic hybrid perovskite solar cells: a materials perspective

Zhongbin Wu,Yonghua Chen,Songcan Wang,Wei Huang,Zhaochen Guo

Abstract:Research on perovskites, a highly promising type of semiconductor material in the field of photovoltaics, has made amazing progress. The development of perovskite solar cells (PSCs) has so far reached a certified power conversion eﬃciency (PCE) of 25.7%. Since the interfaces in PSCs are closely connected to the carrier dynamics (charge separation, transport, injection, collection and recombination), interfacial engineering has become a powerful tool in enhancing the device performance and long-term stability. This review focuses on critically discussing the emerging materials and strategies for interfacial engineering at the charge transport layer (CTL)/perovskite and CTL/electrode interfaces in PSCs with both normal and inverted structures. In particular, the underlying mechanisms of various materials for interfacial engineering in maximizing the PCE and the long-term stability of PSCs are systematically demonstrated. Finally, a brief summary of the latest advances and breakthroughs, and a perspective on the future research directions are presented, which are expected to promote the development of this important research field.

Engineering,Materials Science
Recent Progress in Perovskite Solar Cells: Status and Future

Ying Chen,Man Zhang,Fuqiang Li,Zhenyuan Yang

DOI: https://doi.org/10.3390/coatings13030644

IF: 3.236

2023-03-19

Coatings

Abstract:The power conversion efficiency (PCE) of perovskite solar cells (PSCs) has seen effective performance upgrades, showing remarkable academic research and commercial application value. Compared with commercial silicon cells, the PCE gap is narrowing. However, the stability, cost, and large-scale production are still far behind. For scale-up preparing high-efficiency and stable PSCs, there is a variety of related research from each functional layer of perovskite solar cells. This review systematically summarizes the recent research on the functional layers, including the electron transport layer, perovskite layer, hole transport layer, and electrode. The common ETL materials, such as TiO2, SnO2, and ZnO, need doping and a bi-layer ETL to promote their property. Large-scale and low-cost production of perovskite layers with excellent performance and stability has always been the focus. The expensive and instability problems of Spiro-OMeTAD and electrode materials remain to be solved. The main problems and future development direction of them are also discussed.

materials science, multidisciplinary,physics, applied, coatings & films
Recent Progress of Critical Interface Engineering for Highly Efficient and Stable Perovskite Solar Cells

Yahong Li,Haibing Xie,Eng Liang Lim,Anders Hagfeldt,Dongqin Bi

DOI: https://doi.org/10.1002/aenm.202102730

IF: 27.8

2021-12-29

Advanced Energy Materials

Abstract:Organic–inorganic lead halide perovskite solar cells (PSCs) have demonstrated enormous potential as a new generation of solar‐based renewable energy. Although their power conversion efficiency (PCE) has been boosted to a spectacular record value, the long‐term stability of efficient PSCs is still the dominating concern that hinders their commercialization. Notably, interface engineering has been identified as a valid strategy with extraordinary achievements for enhancing both efficiency and stability of PSCs. Herein, the latest research advances of interface engineering for various interfaces are summarized, and the basic theory and multifaceted roles of interface engineering for optimizing device properties are analyzed. As a highlight, the authors provide their insights on the deposition strategy of interlayers, application of first‐principle calculation, and challenges and solutions of interface engineering for PSCs with high efficiency and stability toward future commercialization. Perovskite solar cells (PSCs) have demonstrated enormous potential as next generation of photovoltaic technologies. Herein, the latest advances of interfacial materials for highly efficient and stable PSCs are summarized with organized classification. The theory and multifaceted roles of interface engineering are analyzed and insights on the deposition strategy of interlayers and outlook of interface engineering for PSCs toward commercialization are provided.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Interfacial Materials for Organic Solar Cells: Recent Advances and Perspectives

Zhigang Yin,Jiajun Wei,Qingdong Zheng

DOI: https://doi.org/10.1002/advs.201500362

IF: 15.1

2016-01-01

Advanced Science

Abstract:Organic solar cells (OSCs) have shown great promise as low‐cost photovoltaic devices for solar energy conversion over the past decade. Interfacial engineering provides a powerful strategy to enhance efficiency and stability of OSCs. With the rapid advances of interface layer materials and active layer materials, power conversion efficiencies (PCEs) of both single‐junction and tandem OSCs have exceeded a landmark value of 10%. This review summarizes the latest advances in interfacial layers for single‐junction and tandem OSCs. Electron or hole transporting materials, including metal oxides, polymers/small‐molecules, metals and metal salts/complexes, carbon‐based materials, organic‐inorganic hybrids/composites, and other emerging materials, are systemically presented as cathode and anode interface layers for high performance OSCs. Meanwhile, incorporating these electron‐transporting and hole‐transporting layer materials as building blocks, a variety of interconnecting layers for conventional or inverted tandem OSCs are comprehensively discussed, along with their functions to bridge the difference between adjacent subcells. By analyzing the structure–property relationships of various interfacial materials, the important design rules for such materials towards high efficiency and stable OSCs are highlighted. Finally, we present a brief summary as well as some perspectives to help researchers understand the current challenges and opportunities in this emerging area of research.
Interfaces and Interfacial Layers in Inorganic Perovskite Solar Cells

Wanchun Xiang,Shengzhong Liu,Wolfgang Tress,Shengzhong (Frank) Liu

DOI: https://doi.org/10.1002/ange.202108800

2021-09-29

Angewandte Chemie

Abstract:Abstract Owing to their superior thermal stability, metal halide inorganic perovskite materials continue to attract interest for photovoltaics applications. The highest reported power conversion efficiency (PCE) for solar cells based on inorganic perovskites is over 20 %. As this PCE corresponds to 73 % of the theoretical limit, there remains more room for further improving the device PCEs than for improving organic–inorganic hybrid perovskite solar cells (PSCs). The main loss is in the photovoltage, which is limited by interfaces in terms of non‐radiative recombination caused by traps and energy‐level mismatch. Furthermore, inefficient charge extraction at interfacial contacts reduces the photocurrent and fill factor. This Minireview summarizes the recent developments in the fundamental understanding of how the interfaces and interfacial layers influence the performance of solar cells based on inorganic perovskite absorbers. An outlook for the development of highly efficient and stable inorganic PSCs from the interface point of view is also given.
Progress of solution-processed metal oxides as charge transport layers towards efficient and stable perovskite solar cells and modules

K. Zhu,Y. Chen,Y. Wang,M. Feng,Y. Zhao

DOI: https://doi.org/10.1016/j.mtnano.2022.100252

IF: 10.3

2022-12-01

Materials Today Nano

Abstract:Recently, perovskite solar cells (PSCs) and perovskite solar modules (PSMs) with power conversion efficiency (PCE) over 25% and 20% have been reported, respectively. Besides developing fabrication approaches to achieve high-quality perovskite light absorbing layers, it is necessary for high-efficiency PSCs and PSMs to be equipped with high-performance charge transport layers, i.e., electron transport layers (ETLs) and hole transport layers (HTLs), which enable sufficient light transmission and effective charge extraction and transport. Metal oxides not only satisfy the requirement as high-efficiency charge transport layer, but also exhibit excellent stability against heat, light and moisture. Solution-processed method for metal oxide nanoparticles is one of the most widely used routes for the deposition of ETLs and HTLs due to its low cost, convenience and high quality. Furthermore, it is also the best choice for developing large-scale PSMs and its commercialization. In this review, some most promising metal oxides such as titanium oxide and tin oxide as ETLs and nickel oxide as HTLs, as well as its solution-processed deposition methods will be summarized. Their recent progress on interfacial passivation in small-scale PSCs and applications in large-scale PSMs will also be discussed. Finally, some challenges and perspectives on how solution-processed metal oxide materials can be developed for photovoltaic devices with higher efficiency and industrial fabrication are provided.

materials science, multidisciplinary,nanoscience & nanotechnology
Metal-Organic Framework Materials in Perovskite Solar Cells: Recent Advancements and Perspectives.

Shuang Li,Lin Li,Yongqi Yin,Y. Yamauchi,Yan Chen,Yuxuan Ye

DOI: https://doi.org/10.1002/smll.202208119

IF: 13.3

2023-03-18

Small

Abstract:Organic-inorganic hybrid perovskite solar cells (PSCs) are among the most promising candidates for the next generation of photovoltaic devices because of the significant increase in their power conversion efficiency (PCE) from less than 10% to 25.7% in past decade. The metal-organic framework (MOF) materials owing to their unique properties, such as large specific surface area, abundant binding sites, adjustable nanostructures, and synergistic effects, are used as additives or functional layers to enhance the device performance and long-term stability of PSCs. This review focuses on the recent advancements in the applications of MOFs as/in different functional layers of PSCs. The photovoltaic performance, impact, and advantages of MOF materials integrated into the perovskite absorber, electron transport layer, hole transport layer, and interfacial layer are reviewed. In addition, the applicability of MOFs to mitigate leakage of Pb2+ from halide perovskites and corresponding devices is discussed. This review concludes with the perspectives on further research directions for employing MOFs in PSCs.

Medicine,Materials Science,Engineering,Physics
Recent Advancements in Enhancing Interfacial Charge Transport for Perovskite Solar Cells

Venkata Seshaiah Katta,Muhammad Waheed,Joo Hyun Kim

DOI: https://doi.org/10.1002/solr.202300908

IF: 9.1726

2024-02-02

Solar RRL

Abstract:Finding the most suitable pathways to improve the interfacial charge transportation in Lead halide perovskite solar cells is a highly desirable research area, to enhance device performance and enable commercialization. The complexities of interfacial charge dynamics, encompassing separation, diffusion, and collection processes, pivot on the thoughtful selection of interlayers and their inherent properties. Challenges arise from non‐ideal interfaces characterized by mismatched energy levels and defects that hinder efficient charge transport. To address these concerns, implementing tailored interfacial engineering strategies, including interlayer modification, band alignments, and passivation techniques, can help mitigate unwanted non‐radiative recombination. This review aims to elucidate the impact of trap states on suppressing charge transport in the device, along with subsequent passivation techniques designed to enhance interfacial charge transport. Following that, a comprehensive overview is presented, highlighting recent advancements in interface engineering techniques that improve interfacial properties between the ETL/perovskite and perovskite/HTL. Significantly, the impact of using buffer layers and dipole layers as interlayers on overall device performance and stability is investigated. This article is protected by copyright. All rights reserved.

energy & fuels,materials science, multidisciplinary
Recent advances in interface engineering of all-inorganic perovskite solar cells.

Jianxin Tang,Hong-Yi Hou,Yanqing Li,Jingkun Wang

DOI: https://doi.org/10.1039/d0nr04365f

IF: 6.7

2020-08-13

Nanoscale

Abstract:All-inorganic perovskite solar cells (PSCs) have become one of the most attractive research fields in recent years due to their excellent thermal stability and light stability as compared with their organic-inorganic hybrid counterparts. However, there is still a long way to go for their commercial application due to their low efficiency and poor stability under humidity conditions. Herein, an overview of the recent progress of all-inorganic PSCs based on interface engineering is provided. The main roles of interface engineering, adjusting energy-level alignment, enhancing charge transport capacity, passivating interface defects, modulating morphology of perovskite films, stabilizing perovskite phase, broadening spectral absorption, eliminating electrical hysteresis and enhancing operational stability, are summarized with examples, which paves the way for highly efficient and stable all-inorganic PSCs. Some of the latest progress in incorporating dopants to charge transport materials and modifying interface properties in all-inorganic PSCs are also covered.

Medicine,Materials Science,Engineering,Physics
Interface materials for perovskite solar cells

Yi-Heng Zhang,Yuan Li

DOI: https://doi.org/10.1007/s12598-020-01696-8

IF: 6.318

2021-06-03

Rare Metals

Abstract:Perovskite solar cells exhibit great potential to become commercial photovoltaic technology due to their high power conversion efficiency, low cost, solution processability, and facile large-area device manufacture. Interface engineering plays a significant role to optimize device performance. For the anode in the inverted devices, this review introduces the progress on the modification of poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) including chemical structure alteration, physical doping, and solution treatment. We present the recent advances of dopant-free hole transport materials widely applied in mesoporous and conventional devices, outlining their innovation with novel molecular design concepts toward promising material properties, and device performance. For the cathode, various metal oxide and organic electron transport materials are covered and the different modification strategies and related mechanisms are highlighted. Most importantly, simple synthesis process, inexpensive raw materials and highly reproducible photovoltaic performance are the main consideration for the design of all the interface materials. Finally, an outlook and some suggestions regarding the future interface engineering are proposed based on the summary of the current development status and working mechanism of interface materials.Graphic abstract

materials science, multidisciplinary,metallurgy & metallurgical engineering
The Progress of Interface Design in Perovskite‐Based Solar Cells

Rundong Fan,Yuan Huang,Ligang Wang,Liang Li,Guanhaojie Zheng,Huanping Zhou

DOI: https://doi.org/10.1002/aenm.201600460

IF: 27.8

2016-01-01

Advanced Energy Materials

Abstract:Organic–inorganic halide perovskite has received extensive attention as a light harvester for next‐generation low‐cost and high‐performance photovoltaics. Its superior optoelectronic properties are attractive among most thin film absorber materials, such as an extremely high absorption coefficient, optimal band gap, ambipolar carrier transport property, and high defects tolerance. However, it requires suitable electrodes and carrier transport materials to fulfill efficient photovoltaic process within an entire device. Thus, the interfaces along the device play a crucial role in determining device photovoltaic performance. Here, the progress of understanding interfaces in perovskite photovoltaics is reviewed from the perspective of processing chemistry and photophysics of carriers, which are the key parameters for the corresponding device photovoltaic behavior. This study is mainly focused on the relevant working mechanism, interface design fundamentals, and the resulting carrier dynamic control over the entire architecture. The study of the interfaces with appropriate materials design provides a fundamental understanding of the photocarrier behavior, including separation, transportation, and collection. The accumulative efforts will contribute to the construction of high‐efficiency perovskite‐based single junction and multijunction photovoltaic devices. It also affects other properties of perovskite solar cells, including J–V hysteresis phenomenon, and long‐term stability. Suggestions with respect to required improvements and future research directions are provided based on the current field of available literature.
Review on Practical Interface Engineering of Perovskite Solar Cells: From Efficiency to Stability

Zhichun Yang,Balaraju Hari Babu,Shaohang Wu,Tianlun Liu,Shaoying Fang,Zhenzhong Xiong,Liyuan Han,Wei Chen

DOI: https://doi.org/10.1002/solr.201900257

IF: 9.1726

2019-07-19

Solar RRL

Abstract:Exceptionally high efficiencies for organic–inorganic hybrid perovskite solar cells (PSCs) have been achieved. However, their operational stability still needs to be improved. The intrinsic instability of halide perovskites caused by the presence of volatile organic cations, as well as the degradation of hybrid perovskites induced by the adverse permeation of environmental water (H2O)/oxygen (O2) and the undesired ion diffusion or migration are the major reasons. Beyond strengthening perovskites themselves, interface engineering is now regarded as a valid strategy to prolong device lifetime by preventing the undesired degradation pathways. This comprehensive review highlights the utilization of practical interface engineering for enhancing the efficiency and stability of organic–inorganic lead halide PSCs. First, the impacts of interface design on the energy‐level alignment and carrier dynamics are overviewed. Second, recent progresses on the development of interfacial materials for simultaneously achieving high efficiency and stability of PSCs are summarized. At last, the interfacial layer design principles along with future outlook of this rapidly developing field are discussed. Interface engineering is widely recognized as an effective strategy to improve the efficiency and stability of perovskite solar cells. This review is intended to provide a deep understanding of interface design principles for highly efficient and stable perovskite photovoltaic devices and a timely overview for state‐of‐the‐art interfacial materials in this rapidly developing field.

energy & fuels,materials science, multidisciplinary

Recent Progress and Perspective in Solution-Processed Interfacial Materials for Efficient and Stable Polymer and Organometal Perovskite Solar Cells

Recent Advances in Interface Engineering for Planar Heterojunction Perovskite Solar Cells

Solution-Processible Conductive Organics For Efficient Polymer And Perovskite Solar Cells

Recent Progress in the Solution-Based Sequential Deposition of Planar Perovskite Solar Cells

Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells.

Solution Chemistry Engineering toward High-Efficiency Perovskite Solar Cells

Interface Engineering in Organic and Organic/Inorganic Hybrid Solar Cells

Recent progress and challenges of organometal halide perovskite solar cells

Interfacial Materials for Efficient Solution Processable Organic Photovoltaic Devices

Recent advances in the interfacial engineering of organic–inorganic hybrid perovskite solar cells: a materials perspective

Recent Progress in Perovskite Solar Cells: Status and Future

Recent Progress of Critical Interface Engineering for Highly Efficient and Stable Perovskite Solar Cells

Interfacial Materials for Organic Solar Cells: Recent Advances and Perspectives

Interfaces and Interfacial Layers in Inorganic Perovskite Solar Cells

Progress of solution-processed metal oxides as charge transport layers towards efficient and stable perovskite solar cells and modules

Metal-Organic Framework Materials in Perovskite Solar Cells: Recent Advancements and Perspectives.

Recent Advancements in Enhancing Interfacial Charge Transport for Perovskite Solar Cells

Recent advances in interface engineering of all-inorganic perovskite solar cells.

Interface materials for perovskite solar cells

The Progress of Interface Design in Perovskite‐Based Solar Cells

Review on Practical Interface Engineering of Perovskite Solar Cells: From Efficiency to Stability