Abstract:：Buckling is one of the most important failure modes for thin-walled cylindrical shell structures under axial compression loads.Based on the fact that the load carrying capacity of thin-walled cylindrical shell structures under axial compression loads are very sensitive to initial imperfections, the theoretical, experimental and numerical research works done by domestic and foreign researchers for more than half a century in considering the influence of initial imperfections on the critical buckling load of axial loaded cylindrical shells are systematically reviewed.Researches have shown that two kinds of equivalent methods to consider the effects of initial imperfections have been established, namely, the deterministic approach based on numerical analysis and the non-deterministic approach under statistical probabilistic theory.Specifically, the former mainly focuses on the initial geometric imperfections, while the latter also includes non-traditional initial imperfections, such as material, thickness and loading imperfections, etc.These two methods have their own characteristics and advantages in predicting the axial load carrying capability of cylindrical shells and conducting buckling design.Compared with the test results, the highest prediction accuracy of the multiple perturbation load approach and single boundary perturbation approach can reach more than 90% and also has a certain safety margin simultaneously.Finally, some research direction and relevant urgent works in the future about the buckling problems of thin-walled cylindrical shell structures considering initial imperfection sensitivity are pointed out, which can provide some guides for related researches. Key words： thin-walled

Stability Analysis of Double-Layer Spherical Reticulated Shell with Imperfections

NON-LINEAR STABILITY CRITICAL LOADS OF SINGLE-LAYER AND DOUBLE-LAYER RETICULATED SPHERICAL SHALLOW SHELLS BASED ON CONTINUUM ANALOGY METHOD

Circumferential Folded Single-Layer Reticulated Spherical Shell and Simplified Calculation Method in Structure Static Analysis

Structural formation and stability performance investigations of large partial double layer reticulated shell structures

Analysis of Internal Force and Stability of Hyperbolic-Inverted Conical Reticulated Shell Structure

Numerical Investigation on Stability of Reticulated Shell Structures Composed of Built-Up Plate Members

Stability analysis method for lattice shells accounting for buckling of members

Form of Circumferential Weld-Induced Imperfections for Tapered-Wall Cylindrical Shell Structures

Experimental and numerical study on stability behavior of reticulated shell composed of plate members

Buckling Strength of Tapered Cylindrical Shells under Partial Axial Compression: Effect of Circumferential Weld-Induced Imperfections

Elastic-plastic dynamic stability analysis of single layer spherical latticed shells considering damage accumulation effect

STATIC STABILITY ANALYSIS OF SINGLE-LAYER K8-ELLIPSOID RETICULATED SHELL

Analytical Study on the Buckling of Cylindrical Shells with Arbitrary Thickness Imperfections under Axial Compression

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Research on Buckling Load Numerical Method of Cylindrical Shells with Initial Imperfection

Numerical Simulation on Buckling of Combined Multilayered Unequal-Thickness Cylindrical Shell

Buckling of cylindrical shells with general axisymmetric thickness imperfections under external pressure

Study of Stochastic Imperfection Method for Stability Analysis of Single Layer Lattice Shell

Instability of Imperfect Non-Uniform Shallow Arch under Uniform Radial Pressure for Pinned and Fixed Boundary Conditions

Numerical Simulation Analysis on Buckling Load of Large Combined Cylindrical Shells