Abstract:Next generation lithium-ion batteries (LIB) with high energy density and high power density have recently become of great interest for electric vehicle and portable devices. With the further upgrade of especially electric vehicles, the next generation LIB with high power and high energy density is urgently required. For this purpose, composite electrode consisting of commercially available graphite active material mixed with silicon nanoparticles is under current development. The main objectives are a significant increase of the practical capacity and energy density of commercial anodes, an overcome of the drawbacks of pure silicon due to large volume changes during electrochemical cycling, and the development of a technology suitable for mass production. In order to reduce the intrinsic mechanical stress of silicon/graphite electrodes and to improve the lithium-ion transport kinetic, free-standing electrode structures were generated by applying ultrafast industrial capable laser material processing. This advanced laser technology is demonstrated to be a flexible and powerful tool for pushing silicon/graphite (Si/C) composite anode materials beyond state of the art electrodes towards application. The electrochemical properties of cells with unstructured and structured electrodes were systematically analyzed by means of cyclic voltammetry, galvanostatic measurements, and electrochemical impedance spectroscopy. The increased active surface enables a significant improvement of lithium-ion diffusion kinetics. Furthermore, it is expected that the increased active surface will also provide additional artificial porosity for active material expansion, which in turn will reduce the mechanical stress within the electrodes during lithiation or delithiation. In this context, in-situ scanning electron microscopy (SEM) was performed in order to analyze the active material volume changes during charging and discharging. A main engineering challenge was to optimize the electrode architecture such as the pitch distance of free-standing structures regarding an enhanced electrochemical performance and a reduced material loss. Furthermore, an alumina (Al2O3) layer with a thickness of 5 nm, which acts as an artificial SEI, was coated on structured silicon/graphite electrodes by applying Atomic Layer Deposition (ALD). Cyclic voltammetry measurements were subsequently performed in order to investigate the fundamental properties of cells with structured and Al2O3- coated silicon/graphite electrodes. Galvanostatic measurements reveal that the cells with structured electrodes exhibit excellent electrochemical properties, i.e., a significantly improved capacity retention. ALD layers can contribute to further improvement of cycle stability and cell lifetime. In addition, advanced full cells with Lithium Nickel Manganese Cobalt Oxide NMC622 as cathode and Si/C as counter electrode were assembled and the electrochemical data will be presented.

Influence of Technology on Electrochemical Performance of High Specific Surface Area Artificial Graphite for Lithium Ion Batteries

Three-Dimensional Double-Walled Ultrathin Graphite Tube Conductive Scaffold with Encapsulated Germanium Nanoparticles as a High-Areal-Capacity and Cycle-Stable Anode for Lithium-Ion Batteries

(Invited) Manufacturing and Characterization of Advanced High Energy Silicon/Graphite Electrodes

Unraveling the Relationship between the Mineralogical Characteristics and Lithium Storage Performance of Natural Graphite Anode materials

Effects of crystal structure and electronic properties on lithium storage performance of artificial graphite

Preparation, Structure, and Electrochemical Performance of Anodes from Artificial Graphite Scrap for Lithium Ion Batteries

Influence of Particle Structure on Electrochemical Character of Composite Graphite

Surface modification of graphite anode in lithium ion battery

Surface Modification of Graphite by Ion Implantation for Promoting the Electrochemical Property in Li-ion Batteries

Carbon-Based 3D Architectures as Anodes for Lithium-Ion Battery Systems

Incorporating Α-Al2o3 Nanodots into Expanded Graphite Anodes Toward Stable Fast Charging for Lithium-Ion Batteries

Practical Approaches to Apply Ultra-Thick Graphite Anode to High-Energy Lithium-Ion Battery: Carbonization and 3-Dimensionalization

Materials and Electrode Engineering of High Capacity Anodes in Lithium Ion Batteries

Influences of Conductive Additives on Electrochemical Performances of Artificial Graphite Anode with Different Shapes for Lithium Ion Batteries

Structure Design and Performance of the Graphite/Silicon/Carbon Nanotubes/Carbon (GSCC) Composite as the Anode of a Li-Ion Battery

Influence of different anode active materials and blends on the performance and fast-charging capability of lithium-ion battery cells

A Study on High-Rate Performance of Graphite Nanostructures Produced by Ball Milling as Anode for Lithium-Ion Batteries

Improving Natural Microcrystalline Graphite Performances by a Dual Modification Strategy toward Practical Application of Lithium Ion Batteries

Graphite As Anode Materials: Fundamental Mechanism, Recent Progress and Advances

Eliminating Graphite Exfoliation with an Artificial Solid Electrolyte Interphase for Stable Lithium‐Ion Batteries

Structural Engineering in Graphite‐Based Metal‐Ion Batteries