Effect of Influent Substrates on the Simultaneous Anaerobic Sulfide and Nitrate Removal

Zheng Ping

2009-01-01

Abstract:The effect of influent substrates on the process performance of simultaneous anaerobic sulfide and nitrate removal,such as tolerance,affinity and capacity,was investigated. Using nitrate and sulfide as influent substrates,the maximum acceptable influent nitrate-nitrogen and sulfide-sulfur concentrations are 189.7 mg·L-1 and 1000 mg·L-1,respectively. The maximum volumetric removal rates for nitrate-nitrogen and sulfide-sulfur are 0.61 kg·m-3·d-1 and 4.57 kg·m-3·d-1,respectively. Under these conditions,the maximum acceptable influent nitrite-nitrogen and sulfide-sulfur concentrations are 252.7 mg·L-1 and 880 mg·L-1,respectively. The maximum volumetric removal rates for nitrite-nitrogen and sulfide-sulfur are 0.65 kg·m-3·d-1 and 3.97 kg·m-3·d-1,respectively. According to the judgment of sensitivity ratio,the activated sludge is more tolerant to sulfide,while no significant differences were found in respect of using nitrate or nitrite as influent substrate. Activated sludge is less tolerant to nitrate and least tolerant to nitrite. Keeping nitrate and sulfide as influent substrates,the half saturation values for nitrate-nitrogen and sulfide-sulfur are (0.35±0.09) mg·L-1 and (1.36±0.36) mg·L-1,respectively. Meanwhile,the half saturation values for nitrite-nitrogen and sulfide-sulfur are (0.26±0.08) mg·L-1 and (1.80±0.30) mg·L-1,respectively. The minimum reaction time (5 h) taken for nitrite and sulfide is relatively longer than that for nitrate and sulfide as influent substrates (4 h).