Abstract:As one of the key components in scanning near-field optical microscopes (SNOM), optical fiber probes can be fabricated by use of either laser-heated pulling or chemical etching. For high-resolution near-field imagine, the nearfield optical signal is rapidly attenuated as the aperture of probes decreases. It is thus important to fabricate probes optimized for aperture size and optical transmission. We present a two step fabrication method of 50%similar to 70% reproducibility to obtain probes with high optical transmission efficiency as well as small tip diameters. First, optic fiber probes with the transitional taper in hyperbolic or parabolic shape are produced by use of the simple home-made device for heating-pulling. Then, a rapid chemical etching with 40% buffered hydrofluoric acid is used to sharpen the tip while keeping the taper shape and the conic angle unchanged. The method renders us to achieve probes with tip diameters in the range of 20nm similar to 200nm and the tape angle near the tip apex in the range of 20 degrees similar to 60 degrees. Particularly, the length of the non-propagating evanescent wave modes region decreases greatly to tens of micrometers or even less. In order to test the achieved probes, we give the photon tunneling decay curve and scanning near-field optical image of holographic grating by use of PSTM mode and collection-mode SNOM, respectively. In addition, an approach curve of shear force with hyperbolic probe is shown to verify its applicability to sample-tip distance regulation on basis of the principle of shear-force.

Transmission Properties of Fiber Probes

The Study on Transmission Properties of Cantilever Probe

Tapered Optical Fiber Sensing Technology

Subwavelength-diameter optical fibers: waveguiding properties and photonic applications

Optical Fiber Index Taper–Theoretical Analysis and Experiment Demonstration

Transmission Efficiency Analysis of Near-Field Fiber Probe Using Fdtd Simulation

Power Conversion Efficiency of Tapered Fiber

Novel fiber taper for efficient optical interconnection

Fabrication and Characterization of Fiber-Optic Nano-Probes with High Transmission Efficiency and High Resolution

Characteristic beam parameters in diffracted field of fiber end face

Study of mode propagation with 632.8-nm laser in tapered fiber

An Multi-to-single Mode Conversion Experiment Using the Tapered Fiber

Fabrication and Application of Nearfield Optical Fibre Probe

Collectible Optical Power of Various Specially Shaped Multimode Optical Fiber Probes for Contact Sensing

Optimization of Tapered Optical Fiber Probe for Evanescent Wave Sensor

Novel tapered optical fiber coupler

Fabrication And Characterization Of Near-Field Optical Fiber Nanoprobes With High Resolution And High Transmission Efficiency

Analysis of Additional Phase Characteristics in Tapered Waveguides

Biconical taper fiber filters

Transmission Characteristic of the Fiber Grating F-P Cavity Acted with Uniform Radial Strain

Study on Large Cone Optical Fiber Probes by Dynamic Chemical Etching Based on Siphon Principle