Effect of different salinity on sludge bulking by using sequencing batch reactor
Jia Yanping,Wang Shanshan,Zhang Lanhe,Wang Xuming,Guo Jingbo
DOI: https://doi.org/10.3969/j.issn.1002-6819.2013.19.014
2013-01-01
Abstract:As one of the most significant factors influencing the settling properties of the activated sludge, the effects of various salinities and their changes on sludge bulking were investigated by applying wastewaters containing different kinds of salinity in a sequencing batch reactor (SBR). The influences of salinities induced by NaCl, Na2SO4 and Na3PO4 on the removal efficiency of pollutants and the settleability of the activated sludge were analyzed by utilizing sodium acetate as sole carbon source. The performances of the SBR fed with NaCl salinity (increased gradually from 0 to 30 g/L) when the dissolved oxygen (DO) concentration was 3 mg/L were as follows:the sludge volume index (SVI) dropped from 135 mL/g to 71 mL/g;the removal efficiency of the total nitrogen (TN) dropped from 80%to 60%;The extracellular polymeric substance (EPS) increased from 521 to 917 mg/L;And the sludge showed a good settleability. When the Na2SO4 salinity increased gradually from 0 to 30 g/L, the SVI dropped from 135 to 73 mL/g, the TN removal efficiency dropped from 81% to 60% and the EPS increased from 523 to 896 mg/L. By comparison, when the Na3PO4 salinity increased gradually from 0 to 8 g/L, SVI increased from 135 to 198 mL/g, the removal efficiency of TN dropped from 80% to 60% and the EPS increased from 549 to 674 mg/L, which led to sludge bulking. It demonstrated that when the NaCl and Na2SO4 salinity increased, the removal efficiency of TN decreased, while the sludge settleability was improved and the EPS concentration increased. For system fed with increasing Na3PO4 salinity, the sludge settleability and the removal efficiency of TN decreased, while the EPS concentration increased. Meanwhile, with the decreasing salinity of NaCl (30~0 g/L), Na2SO4 (30~0 g/L) and Na3PO4 (8~0 g/L), SVI increased from 71 to 298 mL/g, 73 to 291 mL/g and 198 to 241mL/g, respectively, the respective TN removal efficiency dropped from 62% to 43%, 65%to 44%and 70%to 35%and the EPS concentration increased from 917 to 1 092 mg/L, 896 to 1 078 mg/L and 674 to 759 mg/L, respectively. It indicated that when the salinity of NaCl, Na2SO4 and Na3PO4 reduced from high values to low values, the sludge settleability and the removal efficiency of TN decreased, while the correponding EPS concentration continued to increase, which finally led to sludge bulking. In conclusions, when the NaCl and the Na2SO4 salinity experiences a gradual ascending trend, the settleability of the activated sludge will be improved, while the nitrogen removal efficiency will decline;Filamentous sludge bulking is induced when these two salinities undergo a descending trend. Meanwhile, both the increase and decrease of Na3PO4 salinity will result in non-filamentous sludge bulking.