The Design of Voyage Data Recorder (VDR)

Yu Fang

2002-01-01

Abstract:The configuration and main functions of voyage data recorder (VDR) designed with modularizations are introduced in the paper. In the system embedded industrial microcomputer, single-chip microcomputer and field bus technique were adopted.

What problem does this paper attempt to address?

Design of Vehicle Traveling Data Recorder with Bluetooth Upload Function

Ji ZHANG,Yong PENG

DOI: https://doi.org/10.3969/j.issn.1008-1402.2014.01.010

2014-01-01

Abstract:In accordance with GB/T 19056-2003 , a vehicle traveling data recorder based on Freescale MC9S12XS128MAL chip was designed applying the Bluetooth technology .This paper described the overall de-sign of the VTDR system , its corresponding hardware and software design .On the hardware design , this paper described the design of each module;software part , this paper gave the host system's overall processing flow and its sub-processes .Finally , this paper described the implementation of Bluetooth upload functionality .
Design of Data Management Module in Subsea In-Situ Dynamic Environmental Monitoring System

宋忠强,李欣,李培良

DOI: https://doi.org/10.3969/j.issn.1003-2029.2009.04.010

2009-01-01

Abstract:Subsea in-situ dynamic environmental monitoring is very important.Data management system is its core module.ARM9 is the core of its hardware.Its software platform is Linux2.4.20.The module integrates three deep sea instruments and provides realtime and reliable control interface and data interface between coastal base station and deep sea instruments.The module is validated to provide real-time data to coastal base station according to the protocol.Finally,some problems need to be solved are brought forward.
Underwater Mobile Platform Data Acquisition and Transmission System Design

YANG Haibo,XU Yuanxin,XU Wen,LIU Chenzhan

DOI: https://doi.org/10.3969/j.issn.1004-1699.2014.03.017

2014-01-01

Abstract:In order to realize the goal of underwater environment monitoring and data acquisition,this paper designs and implements a set of data acquisition and transmission system based on Autonomous Underwater Vehicle ( AUV) ,which is used in the underwater sensor network. The system adopts two MCU with distributed processing mechanism. It also adopts the suitable frame for data storage and communication and ARQ protocol to make sure the reliable data transmission and storage,which make it possible for a long time environmental and sensor working state monitoring. Several experiment results in lake show that the system not only has good stability and real time but also satisfies the demands of data acquisition and transmission,which is of great value to the mobile node design of the underwater sensor network.
Realization of a distributed system detect-bed-IVD system

徐文渊,朱淼良

DOI: https://doi.org/10.3321/j.issn:1008-9497.2001.06.011

2001-01-01

Abstract:IDV ( intelligentvehicle detect- bed) is a system- level tool to help measure and evaluate the per- formance of ALV ( autonomous intelligent vehicle) ,a multi- agent system.The design target of IVD in- cludes integration,distribution,real time,visualization and re- displaying,and itcan work both online and off- line.In both cases,itiscomprised of two main parts.One is for visualization,the other is for data col- lection.We use a bulletin board to exchange the data between the two parts,to control the interval of re- displaying,and to synchronize two parts during off- line working.When working online,data are only vi- sualized in2 D to achieve the requiremeutof real time.While off- line,data are also reflected in virtual envi- ronment.Experiments showed that IVD can reflectthe performance of ALV visually and facilitate the pro- cess of ALV system test.
Design of Digital Video Recorder Based on TMS320DM642

Chang Qing,Pei Ke,Zhang Gang

DOI: https://doi.org/10.1109/cnmt.2009.5374607

2009-01-01

Abstract:Based on an ARM and DSP dual-processor embedded platform, we design a digital video recorder (DVR) which uses PCI bus interface. This paper realizes the development of BSP from scratch, the main achievements are the building of the development environment, the development of Bootloader and OAL, and ultimately compiled the eboot.nb0 and nk.nb0 running on the development board. The design of device driver and application program is introduced. This recorder can encode video streams and transfer them to the host in real time and store to local hard-disk. Thus it is convenient to complete the functions of remote monitoring system.
A System of Multi-Function Automobile Data Recorder Based on CAN-bus

GAO Feng,WANG Rui,WANG Jian

DOI: https://doi.org/10.3969/j.issn.1004-6410.2005.04.002

2005-01-01

Abstract:This article introduces a system of multi-function vehicle traveling data recorder based on CAN-Bus. It indicates a design method about both hardware and software of the recorder which includes the choice of the CPU, the CAN connection module, memorizer,communicate module, the software inside and the establishment of the manage center. This article explained how to transfer the data by CAN-Bus in detail. This kind of recorder can be expanded and transplanted easily. What's more, it has multiple functions which accord with the National Standard GB/T 19056-2003. The multi-function vehicle traveling data recorder will have a brilliant future.
Design and Implementation of a New Digital Recorder Based on VxWorks

WANG Da-qian,ZHOU Yu,DU Si-dan

DOI: https://doi.org/10.3969/j.issn.1004-373x.2010.22.024

2010-01-01

Abstract:A new kind of fault recorder is designed and implemented according to the demand of current conventional substation and digital substation.It supports the IEC61850 9-1 standard sample value data packet,the standard IEC61850 8-1 GOOSE message,the traditional 202 sample value data packet and the IEEE1588 precision clock synchronization protocol.It synchronizes and merges sampling value from multiple sources and final generates fault recording and analysis report.The hardware platform of this new kind of fault recorder is based on PowerPC8270 and the software platform is based on embedded real-time operating system VxWorks.This recorder is compatible with the traditional protocol in support of the new national standard,it is in line with the trend of the transition from traditional substation to digital stations.It meets today's demand for substation on the recorder.
Very Long Distance Supervisory Control and Data Acquisition System

邵之江,王永铭

DOI: https://doi.org/10.3969/j.issn.1671-5497.2004.03.027

2004-01-01

Abstract:The idea of very long distance supervisory control and data acquisition system (VLD-SCADA) was presented with its analyzed functionality and characteristics. A GSM short message system based on VLD-SCADA design was given focusing on system architecture, data transfer protocol and application command protocol. Frame definition, receive-transition and problem processing scheme, supervision set and opened embedded script extension capability were discussed. The proposed solution was implemented in a VLD-SCADA system with several hundred kilometers.
System Design about Anti-Collision Wireless Communication Vehicle Traveling Data Recorder

JIN Tong,ZHANG Bao-ping

DOI: https://doi.org/10.3969/j.issn.1004-373x.2012.07.044

2012-01-01

Abstract:In order to facilitate real-time various information of VTDR,a wireless module is added into VTDR.The system design about anti-collision wireless communication VTDR is described,including data storage,data collection and data analysis.Focusing on analyzing hardware design and software design of VTDR,a solution on the collision question in the wireless communication is proposed.
Design of black box of vehicle system based on ARM+DSP

YU Shui,DENG Zhen,CAI Hong-bin,CUI Jin-zhong,CHEN Lei-ting

DOI: https://doi.org/10.3969/j.issn.1001-3695.2008.02.096

2008-01-01

Abstract:The black box of vehicle(also named vehicle traveling data recorder) based on ARM+DSP was an intelligent device which could be used for monitoring and recording the situations of the vehicle during traveling.This device was an important improvement on the conventional devices of similarity which only recorded the basic vehicle traveling status.It was remarkable that this device offered video recording function that circularly recorded the environment inside and outside the vehiclefor ten minutes.The application of the device could provide reliable and accurate scientific basis in order to analyze and judge the vehicle's traveling state in dealing with traffic accidents.Besides that,the over time diving and driving disobey the rule of the drivers could also be reduced.The article discussed the functions of the black box of vehicle and the basic flow chat of the software design.
Design of Multi-Functions Vehicle Traveling Data Recorder Based on GPS and GPRS

SUN Yao-jie,ZHAO Zhong-xiang

DOI: https://doi.org/10.3969/j.issn.1674-6236.2010.09.036

2010-01-01

Abstract:The system used AT91SAM9260 ARM processor as the controller,and the linux operating system,and Samsung K91G08U0B NandFlash as the torage medium.Through the ET-318 SiRF Star 3 GPS chipset,the system received GPS signals to locate.GPRS modules SIM300C was used to transfer data.The running state and the location of automobile could be monitored and recorded.By GPRS the driving records and current information will be uploaded to the server to achieve remote monitoring.This system also had darm function to reind the overspecd and fatigue driving recorded data could be transferred to computer through USB or RS-232.The practice proved that the device has steady performance and good effect.
The Design of Embedded Digital Video Recorder System based on Network

CHEN Yao-hong,CHEN Yao-wu

DOI: https://doi.org/10.3969/j.issn.1002-6886.2006.04.028

2006-01-01

Abstract:An embedded digital video recorder system based on network is presented and developed.The system which combined computer、network and embedded technologies gives an effective remote control to DVR.The system design,hardware design,software design are discussed,especially the client section is described in detail.
Acquisition and Diagnosis Module for Vehicle Information Based on SAE J1939 Protocol

Chen Yixin,Li Wuyi,Mo Jiagui

DOI: https://doi.org/10.3969/j.issn.1000-0755.2010.07.025

2010-01-01

Abstract:Based on CAN bus technology and SAE J1939 protocol, a module design for vehicle information acquisition and diagnosis based on Cortex-M3 core microcontroller is presented. The packet and content format of SAE J1939 protocol, and the design of hardware and software are described in detail, in addition the links needing to be noted in the design are pointed out. By reading and processing CAN bus and sensor's data, the module can provide the data about vehicle conditions reliably. Furthermore, it can be integrated in other vehicle products such as vehicle multimedia system and virtual digital meters.
The Design and Implementation of MUAV's Digital Control System Based on RTLinux

方舟,李平,韩波

DOI: https://doi.org/10.3969/j.issn.1001-4551.2004.11.016

2004-01-01

Abstract:This paper accounts for the design problem of on-board digital control system for MUAV based on RTLinux. Specially, an effective approach is presented to solve the problem of collecting data from serial ports using interrupt mechanism in user's realtime threads. A reasonable software structure for the control system is also presented ,and the state estimation part has been implemented under RTLinux successfully. The results of on-board tests prove its effectiveness.
Design and Implementation of Sensor Data Recording System

干开峰,王俊,汪济洲

DOI: https://doi.org/10.3969/j.issn.1673-8012.2012.05.015

2012-01-01

Abstract:A new sensor data recording system applied in the industrial field is designed.The hardware uses the high resolution,wide dynamic range 16 bit ∑-Δ chip AD7705 to acquire the sensor data,AD7705 links the microcontroller S3C2440A by SPI bus.Its software uses Linux as embedded operating system,and graphical programming language QT is chosen to design the application.The system is applied to the auto spring elastic testing system,acquiring directly the elastic sensor data,real-time displaying and controlling through the touch screen,meeting completely the high precision demands in the industrial field,having high engineering value in the other fields such as environmental monitoring.
Hardware design of digital multimeter based on VXI bus

GU Zheng-hua,GU Ya-ping

2006-01-01

Abstract:DMM based on VXI bus is one of the most common and current modules that can be used to build the practical automatic test system.This paper described the hardware design of a digital multimeter based on VXI bus.The device includes circuit of the analog signal regulating,AD converter,data transmitting and VXI interfacing.With the advantage of Message based device,it realized high speed acquisition,fast data transfer and agile control.
Vehicle Traveling Data Recorder Based on Dual-processor

Zhenlong Xiao,Guijin Wang,Jiaxiang Li

2016-01-01

Abstract:With the continuous development of Internet of vehicles technology,in order to improve the customer experience and car loan function safety,each car factory is competing to launch the vehicle terminal with their own characteristics.As the function of the continu-ous heap,the traditional single processor design scheme is no longer satisfied with the existing car plant on the equipment requirements. As the functions are more and more,the single processor can easily generate the problems such as business of interference,efficiency,re-al-time and other issues.In view of this,based on the traditional single processor running recorder,the design uses dual-processor.The design can speed up the data processing and improve the system's extended space,ensure the real-time and concurrency of network com-munication.
Research and design of virtual data acquisition and processing system based on LabVIEW

Qi Xuemei,Gao Ji,Deng Yan

DOI: https://doi.org/10.3969/j.issn.1002-8978.2006.07.009

2006-01-01

Abstract:This paper introduces a virtual data acquisition and processing system which is based on LabVIEW.The design procedure of software and hardware and its debug result are introduced.This system can collect,process,save and display the low and middle frequency signal,with advantages of easy implementation,steady performance,low price and friendly user interface.
The Design Of Vxibus Instrument Memory Module

Ll Lin,Zl Hu

2005-01-01

Abstract:The VXIbus instrument memory module designed by this paper is a single-slot, C size message-based module, it supplies up to 1GB space and three communication modes. Data stored in memory module can be sent to computer and processed. This module supplies data protection function, and guarantees that data will not lose when power off.This paper introduces the design of software and hardware of the VXIbus memory module. The message-based interface with master ability, interrupter ability and A24 access mode is designed by CPLD; Local bus interface is designed, interface timing is defined, and high speed local communication is realized; Based on the comparison of several memories, SDRAM is selected, and the SDRAM controller is designed by CPLD; The VXIbus shared memory communication protocol is researched, hardware and DSP's program sustaining this protocol are designed, and shared memory communication mode is realized, DSP's program sustaining three communication modes is write, and data stored in memory is managed in file format; The instrument driver and soft panel according VPP specifications are designed by use of LabWindows/CVI.As can be seen from actual test, the memory module is designed in reason and satisfies all the performance.
A Radio Monitoring System Based on Virtual Instrument LabVIEW

刘晓慧,杨小勇

DOI: https://doi.org/10.3969/j.issn.1007-3264.2009.05.012

2009-01-01

Abstract:The paper described a Small Radio Monitoring System(SRMS) whose design is mainly based on software-defined radio and virtual instrument concept.It can process frequency analysis for spatical radio signal.Its hardware platform included three parts: cheaper acquisition module of PCI bus,communication receiver,and industrial control computer.The software uses NI LabVIEW 7.1 for full data acquisition,signal processing and TCP/UDP VI.The system can be integrated and constructed quickly.It shows great flexibility and excellent performance based upon the experiment result.

The Design of Voyage Data Recorder (VDR)

Design of Vehicle Traveling Data Recorder with Bluetooth Upload Function

Design of Data Management Module in Subsea In-Situ Dynamic Environmental Monitoring System

Underwater Mobile Platform Data Acquisition and Transmission System Design

Realization of a distributed system detect-bed-IVD system

Design of Digital Video Recorder Based on TMS320DM642

A System of Multi-Function Automobile Data Recorder Based on CAN-bus

Design and Implementation of a New Digital Recorder Based on VxWorks

Very Long Distance Supervisory Control and Data Acquisition System

System Design about Anti-Collision Wireless Communication Vehicle Traveling Data Recorder

Design of black box of vehicle system based on ARM+DSP

Design of Multi-Functions Vehicle Traveling Data Recorder Based on GPS and GPRS

The Design of Embedded Digital Video Recorder System based on Network

Acquisition and Diagnosis Module for Vehicle Information Based on SAE J1939 Protocol

The Design and Implementation of MUAV's Digital Control System Based on RTLinux

Design and Implementation of Sensor Data Recording System

Hardware design of digital multimeter based on VXI bus

Vehicle Traveling Data Recorder Based on Dual-processor

Research and design of virtual data acquisition and processing system based on LabVIEW

The Design Of Vxibus Instrument Memory Module

A Radio Monitoring System Based on Virtual Instrument LabVIEW