Abstract:Detailed investigations were conducted at a facility that manufactures and processes carbon nanofibers (CNFs). Presented research summarizes the direct-reading monitoring aspects of the study. A mobile aerosol sampling platform, equipped with an aerosol instrument array, was used to characterize emissions at different locations within the facility. Particle number, respirable mass, active surface area, and photoelectric response were monitored with a condensation particle counter (CPC), a photometer, a diffusion charger, and a photoelectric aerosol sensor, respectively. CO and CO(2) were additionally monitored. Combined simultaneous monitoring of these metrics can be utilized to determine source and relative contribution of airborne particles (CNFs and others) within a workplace. Elevated particle number concentrations, up to 1.15 x 10(6) cm(-3), were found within the facility but were not due to CNFs. Ultrafine particle emissions, released during thermal treatment of CNFs, were primarily responsible. In contrast, transient increases in respirable particle mass concentration, with a maximum of 1.1 mg m(-3), were due to CNF release through uncontrolled transfer and bagging. Of the applied metrics, our findings suggest that particle mass was probably the most useful and practical metric for monitoring CNF emissions in this facility. Through chemical means, CNFs may be selectively distinguished from other workplace contaminants (Birch et al., in preparation), and for direct-reading monitoring applications, the photometer was found to provide a reasonable estimate of respirable CNF mass concentration. Particle size distribution measurements were conducted with an electrical low-pressure impactor and a fast particle size spectrometer. Results suggest that the dominant CNF mode by particle number lies between 200 and 250 nm for both aerodynamic and mobility equivalent diameters. Significant emissions of CO were also evident in this facility. Exposure control recommendations were described for processes as required.

Environmental Monitoring of Airborne Nanoparticles

JEM Spotlight: Environmental Monitoring of Airborne Nanoparticles.

Review of Online Measurement Techniques for Chemical Composition of Atmospheric Clusters and Sub-20 Nm Particles

Monitoring of Particulate Matter Outdoors.

Online Detection of Airborne Nanoparticle Composition with Mass Spectrometry: Recent Advances, Challenges, and Opportunities

Measurement of Atmospheric Nanoparticles:Bridging the Gap Between Gas-Phase Molecules and Larger Particles

Real-Time Measurement of Airborne Carbon Nanotubes in Workplace Atmospheres.

Airborne Engineered Nanoparticles: Are They a Health Problem?

A review of airborne micro- and nano-plastics: Sampling methods, analytical techniques, and exposure risks

Sampling strategies and analytical techniques for assessment of airborne micro and nano plastics

Measurement of atmospheric nanoparticles: Bridging the gap between gas-phase molecules and larger particles

Personal Exposure Assessment of School Children to Airborne Nanoparticles

Ambient nano and ultrafine particles from motor vehicle emissions: Characteristics, ambient processing and implications on human exposure

Techniques and instruments used for real-time analysis of atmospheric nanoscale molecular clusters: A review

Aerosol monitoring during carbon nanofiber production: mobile direct-reading sampling

Nanoparticles in European Cities and Associated Health Impacts

Evaluating the Feasibility of a Personal Particle Exposure Monitor in Outdoor and Indoor Microenvironments in Shanghai, China.

International Perspective on Ambient Particle Measurements

Characterisation of Particulate Matter on the Receptor Level in A City Environment

A review of atmospheric individual particle analyses: Methodologies and applications in environmental research

Vertical Profile of Ultrafine Particles Around Urban Office Buildings