Abstract:To improve the poor membrane-forming ability of polymer containing sterically-protected organic cations with the excellent alkaline stability, a series of robust and crosslinked poly(2,6-dimethyl-1,4-phenylene oxide)s (PPO) anion exchange membranes (AEMs) with bulky and chemically stable imidazolium cations was prepared by quaternization with C1,C3,C4-substituted imidazole and crosslinking reaction via "thiol-ene" chemistry. Compared to the uncrosslinked counterpart, the crosslinked AEMs showed excellent film-forming properties with the highest of tensile strength of 53.2 MPa, probably owing to the increased entanglement interactions in polymer chains that may in turn result in the controlled the water uptake and dimensional stability of the AEMs. Moreover, by using two different crosslinkers, water uptake of the resulting AEMs could be effectively tuned. The crosslinked AEM had a water uptake of 12.8 wt% with the ion exchange capacity (IEC) of 1.27 meq./g when using a hydrophilic dithiol as the crosslinker, which was almost twice than that for the membrane with hydrophobic crosslinker AEM (water uptake was 6.6 wt%, IEC = 1.28 meq./g). The higher water uptake further contributed to high ionic transport with bromide conductivity of 11.2 mS/cm at 20 degrees C in water and 24.8 mS/cm at 80 degrees C. The excellent alkaline stability of these materials was demonstrated by the fact that, more than 90.4% of bromide conductivity and 60.5% of tensile strength was retained after 1000 h immersion in 1 M NaOH at 80 degrees C, due to the presence of crosslinked networks and alkali-resistant sterically-protected imidazolium. Furthermore, we compared the AEM fuel cell performance and durability of the membrane electrode assembly (MEA) using the crosslinked and uncrosslinked bulky imidazolium-functionalized PPO copolymers as ionomers in catalyst layers. A higher peak power density of 200 mW/cm(2) at a current density of 475 mA/cm(2) and improved short-term durability (20.5 h) under a constant current density of 200 mA/cm(2) at 60 degrees C were obtained for the membrane electrode assembly with the crosslinked ionomer. These results suggest that crosslinking of anion conductive materials with stable sterically-protected organic cations is a facile and effective strategy to prepare the robust and alkaline stable AEMs for high-performance alkaline fuel cells.

Application of Ionized Intrinsic Microporous Poly(phenyl-alkane)s As Alkaline Ionomers for Anion Exchange Membrane Water Electrolyzers

Poly(olefin)-Based Anion Exchange Membranes Prepared Using Ziegler–Natta Polymerization

Reactive Microporous Copolymers with Excellent Film-Forming Ability for Ion Exchange Membranes

Poly(fluorenyl alkylene)-based anion exchange membranes for high-performance water electrolysis

Porous Organic Polymers as Ionomers for High-Performance Alkaline Membrane Water Electrolysis

Durable and conductive anion exchange membranes based on Poly(m-triphenyl carbazolyl piperidinium) for water electrolysis

Ultramicroporous Crosslinked Polyxanthene-Poly(biphenyl piperidinium)-based Anion Exchange Membranes for Water Electrolyzers Operating under Highly Alkaline Conditions

Anion Exchange Membrane Incorporating Polymers of Intrinsic Microporosity for Large Organic Anions

Poly(fluorenyl-indolinedione) Based Hydroxide Conducting Membrane for Anion Exchange Membrane Water Electrolyzers

Poly(biphenyl piperidinium) Anion Exchange Membranes for Alkaline Water Electrolyzers: The Effect of Nonionic Pendant Groups

Hydroxide Conducting Membranes with Quaternary Ammonium Cations Tethered to Poly(arylene alkylene)s via Flexible Phenylpropyl Spacers

Microporous and low swelling branched poly(aryl piperidinium) anion exchange membranes for high-performed water electrolyzers

Highly conductive and stable anion exchange membranes with dense flexible alkyl ether linkages and 1,2,4,5-tetramethylimidazolium for water electrolysis

Polyketone-Based Anion-Exchange Membranes for Alkaline Water Electrolysis

Intrinsic microporous poly(phenyl-alkane)s with pendent piperazinium for high performance anion exchange membrane fuel cells

N3-butyl Imidazolium-Based Anion Exchange Membranes Blended with Poly(vinyl Alcohol) for Alkaline Water Electrolysis

Enhancement of the Mechanical Properties of Anion Exchange Membranes with Bulky Imidazolium by "Thiol-Ene" Crosslinking

Synthesis and properties of a new ether-free poly(bis-alkylpiperidinium) polymer for the anion exchange membrane

Prepared for journal of membrane science N3-butyl imidazolium-based anion exchange membranes blended with Poly(vinyl alcohol) for alkaline water electrolysis

Synthesis and Characterization of Anion Exchange Membranes Based on Poly(arylene Ether Sulfone)s Containing Various Cations Functioned Tetraphenyl Methane Moieties

High‐Performance Anion Exchange Membrane Water Electrolyzers Enabled by Highly Gas Permeable and Dimensionally Stable Anion Exchange Ionomers