Abstract:Thermal effects in hypersonic vehicles, such as severe aerodynamic heating, can greatly influence their thermodynamic behavior. These effects can cause uneven temperature distributions and drastic vibrations, which in turn impact the vibration characteristics of the vehicle structure. To address this issue, a comprehensive approach was developed to study the behavior of honeycomb sandwich structures in high-temperature environments. Firstly, a full-field thermal vibration testing system was established, which allowed for free-boundary multi-temperature region heating at 900 degrees C while applying unconnected excitation. Through this setup, we were able to obtain modal frequencies and modal shapes of the honeycomb sandwich structures under hightemperature conditions. To accurately simulate the heat transfer distribution of the honeycomb sandwich structure, the Q-learning algorithm was employed, which proved effective in achieving accurate and detailed predictions of the full-field heat transfer distribution. Furthermore, for the purpose of further enhancing the accuracy of the finite element model, a multi-state non-uniform temperature field model updating method was utilized. This updated model accounted for the influence of the multi-temperature region heating, resulting in a more reliable representation of the structure's behavior. Additionally, a variational mode decomposition (VMD) framework was applied to visualize and analyze the modal shapes of the honeycomb sandwich structures. By decomposing the time-domain signals with VMD, it is possible to efficiently obtain the modal shapes of the output-only response signals. Experimental results demonstrated that the identification method used in this study produced modal frequencies and modal shapes that closely matched those obtained using the PolyMAX method at room temperature. Therefore, the proposed approach offers an effective means of identifying the modal characteristics of structures subjected to non-uniform temperature fields, particularly in output-only scenarios.

Hybrid Eulerian–Lagrangian Framework for Structural Full-Field Vibration Quantification and Modal Shape Visualization

Variational Mode Decomposition-Based Multirate Data-Fusion Framework for Estimating Structural Dynamic Displacement by Integrating Vision- and Acceleration-Based Measurements

Identification of Earthquake Ground Motion Based on Limited Acceleration Measurements of Structure Using Kalman Filtering Technique

Full-field Extraction of Subtle Displacement Components Via Phase-Projection Wavelet Denoising for Vision-Based Vibration Measurement

Efficient Vibration Measurement and Modal Shape Visualization Based on Dynamic Deviations of Structural Edge Profiles

Framework for long-term structural health monitoring by computer vision and vibration-based model updating

Identification of Structural Dynamic Characteristics Based on Machine Vision Technology

Output-only Modal Identification of Full-Field Time-Domain Data for Heated Hybrid Hollow Sandwich Structures

Multi-point Vibration Measurement for Mode Identification of Bridge Structures using Video-based Motion Magnification

Distributed Modal Identification and Vibration Control of Continua: Piezoelectric Finite Element Formulation and Analysis

Variational Mode Decomposition Framework for Modal Shape Visualization of Honeycomb Sandwich Structures for Full-Field Vibration Measurements in Non-Uniform Temperature Fields

Model updating and force identification from phase-based motion measurements

Structural modal identification through ensemble empirical modal decomposition

Automatic High-Resolution Operational Modal Identification of Thin-Walled Structures Supported by High-Frequency Optical Dynamic Measurements

Target-free 3D tiny structural vibration measurement based on deep learning and motion magnification

MEMS-Based Vibration Acquisition for Modal Parameter Identification of Substation Frame

Modal identification with uncertainty quantification of large‐scale civil structures via a hybrid operation modal analysis framework

Camera-Based Dynamic Vibration Analysis Using Transformer-Based Model CoTracker and Dynamic Mode Decomposition

Structural Low-Level Dynamic Response Analysis Using Deviations of Idealized Edge Profiles and Video Acceleration Magnification

Vision and Vibration Data Fusion-Based Structural Dynamic Displacement Measurement with Test Validation

Multi-input Multi-output Loewner Framework for Vibration-based Damage Detection on a Trainer Jet