Abstract:The plateau-type sodium titanate with suitable sodiation potential is a promising anode candidate for high safe and high energy density of sodium-ion batteries (SIBs). However, the poor initial Coulombic efficiency (ICE) and cyclic instability of sodium titanate are attributed to the unstable interfacial structure along with the decomposition of electrolytes, resulting in the continuous formation of solid electrolyte interface (SEI) film. To address this issue, a chemical grafting method is developed to fabricate a highly stable interface layer of inert Al2O3 on the sodium titanate anode, rendering the high ICE and excellent cycling stability. Based on theoretical calculations, NaPF6 are more likely adsorption on the Al2O3 surface and produce sodium fluoride. The formation of a thin and dense SEI film with rich sodium fluoride achieves the low interfacial resistances and charge-transfer resistances. Benefitting from our design, the obtained sodium titanate exhibits a high ICE from 67.7 % to 79.4 % and an enhanced reversible capacity from 151 mAh g-1 to 181 mAh g-1 at 20 mA g-1, along with an increase in capacity retention from 56.5 % to 80.6 % after 500 cycles. This work heralds a promising paradigm for rational regulation of interfacial stability to achieve high-performance anodes for SIBs. A chemical grafting method is developed to fabricate a highly stable interface layer of inert Al2O3 on the sodium titanate anode, rendering the high initial Coulombic efficiency (ICE) and excellent cycling stability. This is due to the formation of a thin and dense solid-electrolyte interface (SEI) film with rich sodium fluoride, leading to the lower interfacial resistances and charge-transfer resistances.+ image

Significantly Improving the Initial Coulombic Efficiency of TiO2 Anode for Sodium-Ion Batteries

Building a Stable Plateau-Type Na2Ti3O7 Anode Interface Toward Advanced Sodium-Ion Batteries

Achieving High Initial Coulombic Efficiency and Capacity in a Surface Chemical Grafting Layer of Plateau-type Sodium Titanate

Significantly Improving the Initial Coulombic Efficiency of TiO 2 Anode for Sodium-Ion Batteries

Crystalline SnO2 @ Amorphous TiO2 Core-Shell Nanostructures for High-Performance Lithium Ion Batteries

Ultra-high initial coulombic efficiency of the TiO2 anode induced by the synergistic role of the electrolyte and binder for sodium-ion batteries

Improved Na storage and Coulombic efficiency in TiP2O7@C microflowers for sodium ion batteries

Multiscale Interface Engineering of Sulfur-Doped TiO2 Anode for Ultrafast and Robust Sodium Storage.

Carbon-coated TiO2 anode with solid electrolyte interphase engineered by Ca(ClO4)2 as electrolyte additive towards superior sodium storage

Ultra-Small Tio2 Nanoparticles Embedded In Carbon Nanosheets For High-Performance Sodium Storage

Methods of improving the initial Coulombic efficiency and rate performance of both anode and cathode materials for sodium-ion batteries

Efficient Surface Modulation of Single-Crystalline Na2Ti3O7 Nanotube Arrays with Ti3+ Self-Doping Toward Superior Sodium Storage

Synergistic Interface and Structural Engineering for High Initial Coulombic Efficiency and Stable Sodium Storage in Metal Sulfides

DFT-Guided Design of Dual Dopants in Anatase TiO2 for Boosted Sodium Storage

Carbon-bonded, Oxygen-Deficient TiO2 Nanotubes with Hybridized Phases for Superior Na-ion Storage

Heterogeneous Interface Design with Oxygen Vacancy-Rich Assistance High-Capacity Titanium-Based Oxide Anode Materials for Sodium-Ion Batteries

Boosting the Rate Capability of Multichannel Porous TiO2 Nanofibers with Well-Dispersed Cu Nanodots and Cu2+-doping Derived Oxygen Vacancies for Sodium-Ion Batteries

Phosphorus-doping and oxygen vacancy endowing anatase TiO2 with excellent sodium storage performance

Multiscale Interface Engineering of Sulfur-Doped TiO 2 Anode for Ultrafast and Robust Sodium Storage

Insights into the storage mechanism of novel mesoporous hollow TiO2-x/C nanofibers as a high-performance anode material for sodium-ion batteries

Sulfur Doped TiO2 Anchored on a Large-Area Carbon Sheets as High-performance Anode for Sodium-ion Battery.